Uniden iGO CAM 600 User manual

iGO CAM 600
Accident CAM
Vehicle Recorder
For more exciting new products please visit our website:
Australia: www.uniden.com.au
New Zealand: www.uniden.co.nz

NOTE
Uniden does not represent this product to be waterproof. Do not
expose this product to Rain or Moisture.
NOTE
This product is intended for use in a motor vehicle. Don’t install
the device where it will block the driver’s view of the road
(including the mirrors!) or the deployment of the airbag.
NOTE
Keep your attention on the road! Don’t try to operate or focus
on any device while driving. If you have to concentrate on a
device, pull off the road for a few minutes.
NOTE
This unit needs 9V-12V DC input. Ordinary USB charger will not
work with this unit as it provides only 5V DC input.
NOTE
Don’t leave the device in direct sunlight for a long period of time
or where the temperature could go above 60°C.
NOTE
Ensure that the camera lens is kept clean and there is nothing
blocking the lens.
2
UNIDEN iGO CAM 600 Vehicle Recorder
Important Safety Instructions

Contents
Important Safety Instructions ............................................. 2
What Do I Do First? ................................................................4
Make Sure These Items Arrived in the Box .................................................4
Controls & Indicators ............................................................5
How Do I Put It in My Car? .................................................... 7
Attaching the Windshield Mount ..................................................................7
Operation .............................................................................. 8
Micro SD Card .......................................................................................................8
Plug it in, Power On/O .................................................................................... 9
Video Mode .........................................................................................................10
Photo Mode ........................................................................................................ 12
Tool Setting .........................................................................................................13
Playback Mode ................................................................................................. 14
Connecting to a PC ...........................................................................................14
Parking Mode .....................................................................................................15
Important Information ................................................................................... 16
Warranty ..............................................................................17
3
UNIDEN iGO CAM 600 Vehicle Recorder

4
UNIDEN iGO CAM 600 Vehicle Recorder
Make Sure These Items Arrived in the Box
What Do I Do First?
DC (CAR) Adaptor
• If any item is missing or damaged, contact your place of purchase
immediately. Never use damaged products!
• Need help? Get answers at our website:
www.uniden.com.au for Australian model.
www.uniden.co.nz for New Zealand model.
• Owner’s Manual
Windshield Mount
iGO CAM 600
AV Cable
USB Converter Cable (Optional)
Power Cable

Controls & Indicators
UNIDEN iGO CAM 600 5Vehicle Recorder
1
2
3
4
5
6
7
8
9
10 11
12
13
16
15 14 15

6Vehicle RecorderUNIDEN iGO CAM 600
Component Description
1 UP In Menu list, move the cursor, one line up.
2 Micro SD
Card Slot
Use this slot to insert the micro SD card.
3 DOWN In Menu list, move the cursor, one line down.
4 LED • Flashes blue when the unit is recording.
• Glows blue when powered on.
• Glows red when charging.
5 MIC Records sound
6 LCD LCD
7 OK • In Record mode, press to start or stop video recording.
• In Photo mode, press to take a photo.
• PresstoconrmaselectionintheMenu.
• Presstoconrmachangeinthesettings.
8 AV Port Connects to an external device.
9 MENU/
MODE
• In Standby, open the menu.
• Press and hold to switch between various modes
(video, photo, playback).
• Whilerecording,presstomanuallylocktheles.
10 POWER Press and hold to either switch on or off the unit.
11 Bracket
Slot
Fit the bracket hook of the windshield mount.
12 Micro USB
Port
• Connect to External Power (9V-12V DC IN)
• Connect to PC for data (SD card) transfer
(Use only Uniden’s USB Converter cable).
• Connect to the Car Battery for Parking Mode.
13 RESET If the device fails to operate properly, try resetting the
device.Presstheresetbuttonbyusinganepen.
14 Camera
Lens
Lens
15 LEDs Infrared night vision LEDs
16 Speaker Speaker

7
UNIDEN iGO CAM 600 Vehicle Recorder
Attaching the Windshield Mount
How Do I Put It in My Car?
1. Insert the bracket hook into the bracket slot provided on the top of the unit.
2. After inserting the hook, slide it down till it locks in position.
NOTE
Suction cups will not stick well on a curved/textured or wet surfaces.
3.Pressthesuctioncupatagainstthewindshield.
4. Push the suction lock up, until it snaps into place and tighten the locking
collar to secure.
5. Gently pull on the mount to make sure it is secure.
It maybe a good idea to secure the power cord with cable clips so that it does
not interfere while driving.

Micro SD Card
NOTE
A compatible micro SD card has to be inserted before you start
using the Recorder. Ensure that the unit is turned off before
inserting or removing the SD card.
The unit can support micro SDHC cards (High Capacity SD) up to 32GB in
capacity. A micro SDHC card of at least 4GB capacity and minimum speed of
Class 10 is recommended.
Insert a formatted micro SD card gently in the slot at the side of the unit. To
remove the card from the slot, press the edge of the SD card inwards for it to
pop out and then pull it out of the slot.
It is important to format the micro SD card before using it, so as to avoid any
damagetothelescreatedoniGOCAM600.
Uniden recommends using good quality micro SD cards.
Operation
8Vehicle RecorderUNIDEN iGO CAM 600
NOTE
Please ensure that the battery is fully charged before using it
forthersttime.Toextendthebatterylife,chargetheunitfully
once every 2 months.
Battery Alert
The unit has an in-built battery of 110mAh capacity.
The image given below indicates the battery level at different stages.
Full
Half full
Low
Empty

Plug it in, Power On/Off
NOTE
When connected to a car charger with power, the unit will power
on automatically and start recording.
Connect the DC car adaptor to the power connector (USB/DC IN port)
found on the device.
Connect the other end of the DC car adaptor to your car’s cigarette lighter.
When connected to the car charger the unit will power on automatically
and start recording. When the car’s engine is turned off, the unit will
automatically turn off in a few seconds.
At other times, press and hold the POWER button to turn it on or off.
NOTE
Only use the DC car adaptor that comes with your device. Any
other adaptor might damage the device.
9
UNIDEN iGO CAM 600 Vehicle Recorder

10
UNIDEN iGO CAM 600 Vehicle Recorder
Video Mode
When connected to a car charger, the unit automatically goes into the video
mode and starts recording. The record icon will display on the screen.
Aashingreddotnexttotherecordiconindicatesthattheunitisrecording.
To stop recording, press OK and the red dot disappears, indicating that the
recording has stopped.
NOTE
To record a video, ensure that a valid micro SD card is inserted
in the given slot.
Using the iGO CAM 600 you can record videos and take photos. To record
videos, you need to ensure that the unit is in the Video mode.
Press and hold MENU/MODE button to switch between Video, Photo and
Playback modes.
Menu Settings
NOTE
Please note, you cannot access MENU in the video mode,
when the unit is recording. To access the Menu settings, you will
need to stop recording by pressing OK.
Press MENU/MODE to open the Menu Settings. The UP/DOWN keys can
be used to scan through the options, under each menu setting. Press OK to
select the required option.
Press MENU/MODE to exit the Menu Settings.
Recording
Protect the Current Recording
While recording, if you want to protect the current recordings, then press the
MENU/MODE button, the icon will appear on the screen. This indicates
that those recordings have been locked and will not be overwritten by new
video clips.