Uniden UOE1600-GW User manual

UOE1600-GW
4 Port PSTN Gateway
Quick Installation Guide

UOE1600-GW Hardware Installation
1. Plug “Power Adaptor”, set switch to ON (UOE1600 GW will be
ready for use after two minutes.)
2. Connect the Landline Phone Jack to the “LINE” port of
UOE1600 GW.
3. Connect the “LAN” port of UOE1600 GW to Ethernet port of
switch, which is connected to the LAN port of UOE1600.
UOE1600 Web page
After the procedure above has been preformed, then UOE1600-GW
is registered to UOE1600 server automatically.
Now the UOE1600-GW is accessible from the web pages of
UOE1600 main system.
(For UOE1600 main system web login, the default user name is
“admin1234”; the default password is “adminxxxxxx”. (”xxxxxx” are
the last 6 characters of the UOE1600 device’s MACAddress with
lower case.))
Below you can see UOE1600-GW is now in the list as shown below.
Also you can see there are four extra PSTN line ports added in
UOE1600 main system when the UOE1600-GW is ready.