Uniden App Cam Floodlight User manual

1
APP CAM
FLOODLIGHT
QUICK START GUIDE

2
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this Owner’s Manual will void
the warranty! We will not assume any liability for damages to items or
persons caused by improper handling or non-compliance with the safety
notices! Any warranty claim will be null and void in such cases.
• Never tug on the power cords. Use the plug to unplug it from the outlet.
• If you wish to hardwire the App Cam Floodlight, consult with a licensed
electrician and installation and wiring must be performed by a licensed
electrcian in accordance with local and national wiring rules (e.g., AS/
NZS 3000 Electrical Installations).
• Do not connect the App Cam Floodlight to a dimmer switch or timer.
• App Cam Floodlight must be installed on a flat vertical wall and
capable to support the weight of the camera.
• Verify that the supply voltage is correct. Connect the camera to a
AC240V, 50Hz power source.
• Do not open or disassemble the product. There are no user
serviceable parts inside.
• Do not install near combustible or flamable surfaces.

3
CONTENTS
IMPORTANT SAFETY PRECAUTIONS �������������������������������������2
CONTENTS ����������������������������������������������������������������������������������3
OVERVIEW� ����������������������������������������������������������������������������������4
Features ................................................................................... 4
WHAT’S IN THE BOX? ����������������������������������������������������������������5
GETTING TO KNOW YOUR APP CAM FLOODLIGHT �������������� 6
INSTALLATION ������������������������������������������������������������������������ 7
General Placement Considerations ......................................... 7
Wi-Fi Operating Considerations ............................................... 7
Installation Diagram ................................................................. 8
Installing the Camera ............................................................... 9
INITIAL CAMERA SETUP ���������������������������������������������� 10
Adjusting the Floodlight and Camera .................................... 14
TROUBLESHOOTING ���������������������������������������������������� 15
SPECIFICATIONS ����������������������������������������������������������� 16
WARRANTY

4
OVERVIEW
Uniden’s App Cam Floodlight camera works with your smartphone to
create a powerful home security network. No PC interface is needed to
view video on your smartphone or wireless devices. It is suitable for day
or night time use.
Features
• 1080P Full HD video quality
• Thermo Sense PIR motion detection up to 10m
• Two floodlights up to 2500lux
• Support manual / PIR trigger / APP control light switch
• Support to control the brightness of the light via App
• 150°Wide viewing angle, see more of every moment
• 2.4GHz WiFi connection, no network cord required
• Support MicroSDcard storage up to 128GB, min class 10
• Rotatable panorama design, full view of every angle
• Support 2-way audio between phone and camera
• 7x24 video recordings to local storage

5
• Image may vary slightly from the actual product.
• If any item is missing or damaged, contact your place of purchase
immediately. Never use damaged products!
• Need help? Get answers at our website:
www.uniden.com.au for Australian model.
All trademarks are registered trademarks of their respective owners.
WHAT’S INSIDE THE BOX
Floodlight Camera Bracket Screws
Mounting Screw
and Washer
Grounding Screw
(For Hardwiring)
Wall Bracket
Silicone Cap Weatherproof Cushion

6
GETTING TO KNOW YOUR
APP CAM FLOODLIGHT
Camera Lock
Collar
Light Lock Collar
PIR Motion Detector
Light Adjustment
Knob
Lens
Speaker
LED Indicator
Microphone
2500 Lux Floodlight

7
General Placement Considerations
• The cameras included are weatherproof and have an IP65 weather
rating. Water can be sprayed on them and they will still work;
however, the cameras cannot be submerged underwater.
• Although the cameras can be exposed to the rain splashes, it is
recommended that, if they are used outdoors, they be mounted
under some type of cover like a patio overhang or an eave.
• Also, as dust, grime, and cobwebs accumulate on the camera glass,
they can reflect light and might lower video quality. Periodically, clean
the lens glass with a soft cloth.
• Avoid having a direct light source in view of the camera. This
includes street lights, ceiling or floor lamps, etc.
Wi-Fi Operating Considerations
• Ensure the Wi-FI signal reception is acceptable between the App
Cam Floodlight and the WiFi router. If necessary, reduce the distance
between them to improve overall system performance.
• As the Wi-Fi environments may vary including home construction type
and wireless interference from other electronic devices, your device
may indicate that the camera is disconnected or may display a black
screen.
• Please note the camera can only connect to 2.4G Wi-Fi and does not
support 5G Wi-Fi connection.
• If you’re getting a weak Wi-Fi signal or you can’t connect to Wi-Fi at
all on your phone at the installation area, we recommend moving your
router closer or install a Wi-Fi extender to improve signal reception or
selecting another installation location.
INSTALLATION

8
Installation Diagram
Camera Lock Collar
Light Lock Collar
PIR Motion Detector
Silicone Cap
Light Adjustment Knob
Mounting Screw and Washer
Weatherproofing Cushion
Wall Bracket
Bracket Screw

9
Installing the Camera
1. Hold the wall bracket where you want to mount it and mark the
location of the screw holes.
2. Use the included bracket screws to secure the wall bracket to the wall.
3. Tug gently on the wall bracket to make sure it is securely in place.
4. Peel the backing off the adhesive Waterproof Cushion and stick it to
the back of the App Cam Floodlight.
5. Place the App Cam Floodlight (make sure the “UP” arrow on the back
is pointing up) against the wall, aligning the center mounting holes and
lock it securely with the provided long mounting screw and washer.
6. Insert the provided screw cap firmly into the center mounting hole.
7. Remove the protective film from the camera.
8. Connect the power cord into a standard indoor power outlet. Switch
on the plug and allow the camera to power up. This can take up to a
minute.
9. When the camera starts flashing red, it is ready to be paired with your
Wi-Fi network.
LED Light status Camera Status
Solid Red LED Camera is booting up. Live streaming/Motion
recording
Red LED Flashing Waiting for Wi-Fi conguration.
Blue LED Flashing Connecting to Wi-Fi
Sold Blue LED Camera is online

10
To set up your new App Cam Floodlight, please make sure it’s
successfully installed, and that the status LED on the camera is flashing
red.
This flashing red status LED means that your Camera Floodlight is ready
to be paired to your My Uniden App
Prerequisites
• You must have an available Wi-Fi-enabled Smartphone (Android or
iOS smartphone).
• The App Cam Floodlight and your mobile device must within the same
Wi-Fi network range for initial setup (ideally within 3m from the router).
• Wi-Fi router connection is 2.4GHz and password if any.
1. Search and download the free My Uniden App from the App Store for
iOS devices or Play Store for Android devices. You will need to create
an account specifically for the My Uniden app. If you already have a My
Uniden app account, you will log into the My Uniden App using your My
Uniden account email and password. You can skip to Step 6.
2. When the LED indicator starts flashing red, the camera is ready to
be paired with your Wi-Fi network. If the LED indicator is not red and
flashing quickly, press and hold the reset button, wait for the LED
indicator to flashing red.
INITIAL CAMERA SETUP
Press and hold the Reset button (behind the
camera) for 5 seconds to reset the camera
* Please note that app screenshots are for reference only� User Interface for iPhone and
Android Phones might differ in terms of icons layout and functionality and may change
without notice�
As the My Uniden App is constantly under development to enrich user experience,
the icons/screens shown in this QSG may vary slightly from the actual app.