Uniden App Cam Pano Series User manual

App Cam
Pano Series
Quick Start Guide

What’s in the Box
Pack of Screws
App Cam Pano Waterproof Lid
Mounting Plate
Antenna Power Adapter
Power
Extension Cable
1M
Ethernet Cable
Quick Start Guide Screw Driver
Mounting Hole
Template
1

2
General Introduction
Antenna
Daylight Sensor
Mic
Lens
Spotlights
Infrared Light
Mounting Bracket
Ethernet Port
Power Port
Weatherproof Lid

RST
3
Micro SD Card Slot
*Reset Button
Use a pin to press.
Speaker
*Note:
Reset: Press and hold the Reset button for 5 seconds or until you hear a beep while the camera is powered on to return
your camera to factory default settings

4
Powering the Camera
For initial setup, please power on the camera with the power adapter and also
connect the camera to your router LAN port with an Ethernet cable, and then follow
the steps to set up your camera. Please make sure your camera and your phone are
on the same network.
1. Connect the camera to a LAN port on your router with an Ethernet cable for initial
setup.
2. Use the power adapter to power on the camera.
Camera
Router
Network Cable

5
Install Uniden Solo App
There are two ways to get the Uniden Solo
App:
• Search “Uniden Solo”in App Store (for iOS),
download and install the app.
• Search “Uniden Solo”in Google Play (for
Android), download and install the app.
1. Please click the “ ” button
in the top right corner to add
the camera.
If you’ve opened the Add Device Automatically option on the Settings page, you can tap the device on the
Device List page and skip to step 4 directly.
If you don’t enable that option, you can tap the Add icon on the upright corner, and scan the QR code on the
camera to add this device.

6
2. Scan the QR code on the
body of the camera.
3. Camera starts initialisation
setup.
4. Create the login password
for the camera and tap
Next.

7
5. Name the camera and tap
Next.
6. Choose the WiFi network
you want to join.
7. Enter the password of
the WiFi network, and
then tap Save to save
the conguration.

8
8. Format the SD card inserted
in the camera (optional) and
then tap Next to format the
SD Card.
9. Tap Finish to complete the
setup.