UniGuard UM405 User manual

www.uniguardgps.com
UniGuard Technology Limited
UM405 4G OBD Data Terminal
User Manual
(Version V1.0)
Thank you very much for using GPS TRACKER, the user manual will guide how to operate this
product, please read it carefully before using it in order to get the correct method of operation. If
the appearance, color and accessories of this product are modified, please refer to the actual
product. The manufacturer is not liable for faults and omissions which in the user manual.

www.uniguardgps.com
UniGuard Technology Limited
1、Product functions & Parameters
1.1 Product functions
Location inquiry, geo-fence, over-speed alarm, power-off alarm, historical route playback,
Vehicle fault diagnosis, OBD data detection.
1.2 Parameters
QUECTEL EC25 module (different modules for different countries, the following are the frequency
bands for EC25, different countries with different modules and frequency)
4G:LTE FDD:B1/B3/B5/B8
LTE TDD：B34/B38/B39/B40/B41
3G :WCDMA:B1/B8
:TD-SCDMA:B34/B39
2G :CDMA:BC0 900/1800MHz
●Wide voltage input range: 9 - 35V;
●Location time: average warm start:≤3sec(open sky)
Average cold start:≤35sec(open sky)
●Device dimensions:58mm × 45mm × 20mm;
●Location accuracy:≤10 meters;
●Working Temp:-20℃- 75℃
2、Product accessories and LED light status
2.1 Accessories:
Standard: device, user manual
2.2 Device LED light status
2.2.1 RED LED (OBD Working status)
Light status
Meaning
light
OBD working
off
OBD Sleep/power off
2.2.2 Yellow LED (GSM signal status)
Light status
Meaning
Quick flash
GSM initialization
light
GPRS normal communication/online
off
GSM sleep/power off
2.2.3 Blue LED (GPS signal status)
Light status
Meaning
Quick flash
GPS signal searching
light
GPS location finished
off
GPS sleep/power off

www.uniguardgps.com
UniGuard Technology Limited
3、Installation instructions
3.1 Preparation before installation:
1, Open the box and check whether the device and the accessories are complete, otherwise please
contact your dealer.
2, SIM card selection, the device works with Micro SIM card, and support full Netcom band.
3, SIM card installation, SIM card corner inside, chip face to the side with shrapnel, which can help
to hold the card.
Note: (1) Before installing or removing the SIM card, please switch off the device;
(2) Should activate the GPRS function of the SIM card;
(3) Should activate the caller ID function; (activate or not according to the
functions you chose.)
(4) If your SIM card required you to input the SIM PIN, please refer to your
mobile phone user manual to turn off the SIM PIN function.
(5) Please ensure that the SIM card is valid.
3.2 Installation
Device with standard OBDII socket
Supported OBD Protocol:
IS015765-4 （CANBUS）
ISO14230(KWP)
ISO9141-2

www.uniguardgps.com
UniGuard Technology Limited
4、SMS commands and instructions:
Send SMS command from user’s SIM card number to the SIM card number which inside the
GPS device.
The commands in the following SMS command list are in English input format, and the letters
are case-sensitive according to the instruction requirements.
Common commands
SMS command format
Device reply
User parameter query
CXZT
Version, ID, IP, etc…
Set center number
admin123456 15012404563
Center number setting okay.
Set new password
pwd123456 654321
Password reset okay.
Set IP and Port
IP domain port
Example: IP www.gpspos.net 8800
SET IP OK
Device restart
CQ
CQ OK
Restore factory settings
FORMAT
FORMAT OK
ACC off upload time interval
FREQ,123456,20
SET OK
ACC ignition upload time interval
STATIC,123456,20
SET ACCONTIME OK
Revise APN
APN123456 CMMTM
SET APN OK
Revise APN user name
APNUSER123456 USER
SET APNUSER OK
Revise APN password
APNPASSWD123456 PASSWORD
SET APNPASS OK
Over speed alarm
speed123456 080
speed123456 000 (turn off)
5、App
Search GPSPOS at Appstore
Search POSGPS at Google play
Please log in with account provide by your supplier.