Package Contents
Check the following contents of your package:
PoE Switch x 1
User’s Manual x 1
Power Cord x 1
Accessories(hanging ears*2, Rubber Feet*4, screw*8)
If any part is lost and damaged, please contact your local agent immediately.
1. Introduction
Thank you for choosing UNIPOE PoE Switch. The PM3012FSFL V3 Provides have 8-10/100Mbps PoE RJ45
Port and 2-Gigabit Combo port. Its PoE ports can automatically detect and supply power with those IEEE
802.3af/at compliant Powered Devices (PD). The electrical power is transmitted along with data in one
single cable allowing you to expand your network where there are no power lines or outlets, where you
wish to fix devices such as AP, IP Cameras or IP Phones, etc.
The LCD not only can display the PoE work status, accurate judgment port of load, can also help customer
and engineer timely discover and solve the network failure, improve work efficiency and quality.
Port Feature
2. Hardware Description
2.1 Front Panel
The Front Panel of the PoE Ethernet Switch Consists of Ethernet Ports. The LCD Display and LED indicators
are also located on the panel
