UniRobotix Adventure Armor Mixed-Reality FPV Racing Kit User manual

?
1
13@B7471/B3
Product: Adventure Armor Mixed-Reality FPV Racing Kit
Serial#:
Result:

A1/< B= 53B
B63 ;=07:3 />>
Adventure Armor

USER MANUAL OF
THE ADVENTURE ARMOR MIXED-REALITY FPV RACING KIT VERSION 1.3
B/0:3 =4 1=<B3<BA
GENERAL INFORMATION .......................................................... 1
I. OVERVIEW ....................................................................... 1
II. QUICK START GUIDE..................................................... 2
III. HARDWARE SPECS ........................................................ 5
IV. SYSTEM REQUIREMENTS............................................ 7
INFILTRATOR MK1 ....................................................................... 8
I. OVERVIEW ....................................................................... 8
II. POWER BUTTON........................................................... 10
III. OPTICAL TURRET......................................................... 11
IV. STATUS INDICATOR ..................................................... 12
REMOTE SIGHT........................................................................... 12
MIXED REALITY BEACONS .................................................... 15
ADVENTURE ARMOR MOBILE GAME ................................. 16
I. GAME MENUS ............................................................... 16
II. 2D CONTROL INTERFACE .......................................... 18
III. HOLOGRAPHIC CONTROL INTERFACE ................. 18
TROUBLESHOOTING................................................................. 20

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 1
53<3@/: 7<4=@;/B7=<
I. OVERVIEW
The Adventure Armor Mixed-Reality FPV Racing Kit
(hereinafter "the Kit") provides every item you will need to turn
a living room, a backyard, a miniature craftwork, a small place in
the forest or anywhere you could imagine into a mixed reality
gaming environment, where you will find plenty of joy from
playing the Adventure Armor mobile game within.
The Kit contains the following items:
④
②
⑤
⑥
⑦
③
①

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 2
○
1
Time Attack Cards × 11
○
2
Beacon poles ×22
○
3
Beacon bases ×22
○
4
Infiltrator MK1 ×1
○
5
USB cable ×1
○
6
Charger ×1
○ 7 Remote sight ×1
II. QUICK START GUIDE
This guide demonstrates a few steps to set up the items to
make them game-ready.
Step 1: use the USB cable and the charger to charge
Infiltrator MK1 from AC outlet, or use the USB cable only to
charge from a computer’s USB port.

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 3
*Warning: avoid letting children use the charger.
Step 2: when Infiltrator MK1 is fully charged, the status
indicator light will automatically turn off. Flip the optical turret
90 degrees up. Press and hold the power button for 3 seconds until
the status indicator light start blinking. Place Infiltrator MK1 on
the field.

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 4
Step 3: assemble a Time Attack Card, two beacon poles and
two beacon bases into a Mixed-Reality beacon.
Step 4: place at least one “Flag” beacon and the “Waypoint
1” beacon on the field which is considered to be the gaming
environment.

USER MANUAL OF
THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3
P AGE | 5
Step 5: scan the QR code shown below or on the back of the
package to download the Adventure Armor mobile game from
Apple App Store or Google Play. Follow the in-game tutorial to
start a game.
III. HARDWARE SPECS
Infiltrator MK1
Exterior dimensions 64mm × 44mm × 27mm
Wheelbase 40mm
Ground clearance 4mm
Approach angle 45°
Weight 32g
Engine power 240mW

USER MANUAL OF
THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3
P AGE | 6
Engine torque 12mN
· m
Top speed 1.17km/h
Battery capacity 300mAh
Charging voltage 5V
Working radio frequency 2.4GHz
Remote control distance 5m
Video resolution 1280×720
FOV 60°
Remote sight
IPD 64mm
FOV 78°
Applicable myopia < D 5.00
Compatible mobile devices Android/iOS phones w
screen sizes range from 4 to
6 inches
Weight 111g
Major material Paper, PC

USER MANUAL OF
THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3
P AGE | 7
IV.SYSTEM REQUIREMENTS
Android platform
Operating System Android 6.0 or higher
SoC Qualcomm Snapdragon 820
equivalent or higher
Memory 2GB or higher
Storage Minimum 150MB available
Sensors Camera, touch screen,
accelerometer, gyroscope
iOS platform
Operating System iOS 9.0 or higher
SoC Apple A9 or higher
Memory 2GB or higher
Storage Minimum 250MB available
Sensors Camera, touch screen,
accelerometer, gyroscope

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 8
7<47:B@/B=@ ;9&
I. OVERVIEW
Infiltrator MK1 is a tracked reconnaissance vehicle. It can be
remotely controlled by the mobile game Adventure Armor.
CONTINUOUS
TRACK
H ADLIGHTS

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 9
POW R
BUTTON
STATUS
INDICATOR
OPTICAL
TURR T
CHARGING
PORT

USER MANUAL OF
THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3
P AGE | 10
II. POWER BUTTON
The power button can be either clicked or held down. The
three tables below describe how these actions behave under
specific status.
Status 1: power is off
Click Turn on the headlights for 5 seconds.
Click again repeatedly before time runs
out will keep the headlights constantly on.
It is useful when you are looking for a
handy flashlight.
Press and hold
for 3 seconds
Power up Infiltrator MK1 to get it ready
for establishing a connection to the
Adventure Armor mobile game.
Status 2: power is on but not connected to the game
Click Manually turn on the headlights for 5
seconds. Click again repeatedly before time
runs out will keep the headlights constantly
on.

USER MANUAL OF
THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3
P AGE | 11
Press and hold
for 3 seconds
Power down Infiltrator MK1.
Idle for 5
minutes
Infiltrator MK1 will automatically power
down to save energy.
Status 3: power is on and connected to the game
Click No response. Since the headlights control is
overridden by the game.
Press and hold
for 3 seconds
Power down Infiltrator MK1.
III. OPTICAL TURRET
Optical turret is equipped with a camera.
Please flip it up 90 degrees before starting a game, otherwise
you will not be able to see the streaming video captured by
Infiltrator MK1 on your smartphone or remote sight.
Do not forget to flip the optical turret down before putting
Infiltrator MK1 in your pocket, backpack or handbag, otherwise

USER MANUAL OF
THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3
P AGE | 12
the camera may be damaged.
*Warning: do not bend the orange flexible printed circuit
by hand. Always let it naturally bended by flipping the optical
turret.
IV.STATUS INDICATOR
Status indicator is an orange signal bulb that blinks in
specific frequency to indicate the status of Infiltrator MK1.
Status Signal frequency
Power is off Constantly off
Being charged Blink slow
Power is on Blink fast
@3;=B3 A756B
Remote sight allows you to access the holographic control
interface. For more information about this interface, please refer
to the in-game tutorial.
To set up the remote sight, simply follow the 3 steps below:

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 13
○
1
○
2
○
3

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 14
Place your smartphone in the remote sight as shown below
when the game asks you to:
*Note: for the first time, press the gear button and scan
the QR code printed on the bottom of the remote sight. This
operation will correct the image distortion automatically.
A trigger is located on the top right corner of the remote
sight. Push it for interaction in the holographic control interface:

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 15
*Note: press the cover of remote sight tightly after
placing the smartphone so the vacuum sticker could prevent
the phone from slipping out.
;7F32 @3/:7BG 03/1=<A
Mixed Reality beacons have specially designed patterns
that can be read efficiently by the Adventure Armor mobile
game’s Computer Vision feature.
The pattern is located at the position shown below on the
Time Attack Card.
*Note: if the game has difficulty reading the Mixed
Reality beacons in dark, try turn on the headlights.

USER MA UAL OF
THE ADVE TURE ARMOR MIXED REALITY FPV RACI G KIT VERSIO 1.3
P AGE | 16
/2D3<BC@3 /@;=@ ;=07:3 5/;3
I. GAME ME US
In the root menu, there are several buttons to access
corresponding sub-menus.
Championship:
The main entrance to start a racing game. In this sub-menu,
you will be able to create a local game, share the game to the
online server, join an online game, view leaderboard, or start a
race. Game started from championship will try to read the Mixed
Reality beacons on the gaming field, in order to analyze scores.

USER MANUAL OF
THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3
P AGE | 17
Freeplay:
Start a game immediately without analyzing scores. you
will be able to control Infiltrator MK1 freely for exploring,
practicing, taking photos and recording videos.
Settings:
This sub-menu provides various options to set up
languages, sound effects, music, etc. And advanced settings for
fine tuning Infiltrator MK1’s handling.
Memoirs:
Here stores the captured photos and videos. In this sub-
menu, you can select, delete, share these media files, or copy
them to the gallery of the smartphone.
Manual:
This is the in-game manual that contains detailed guides
and tutorials for the game. It is recommended to read the manual
before starting the game for the first time.
Credits:
Displays members and groups involved in the
development of the Adventure Armor mobile game.