
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Getting Started 
 
When RS804 is connected to a power source, please check the LED status to make sure when 
to connect with the utility. Please noted that if the power is off and restarts it again, the LED 
process will start over from the beginning. 
 
When the power is on : 
 
Power LED : Green Solid On 
 
Status LED : Step 1 : Red Solid (for about 12 secs ) 
Step 2 : Red Flashing (for about 25 secs) 
 
LED goes off for about 50 secs (LLRP is about to start.) 
 
Step 3 : Green Flashing: Ready to connect with the utility 
(Users now may start to connect RS804 to the PC/ Laptop ) 
Step 4 : Green Solid: successfully connected 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Checking the LED status 
 
LED Description 
Power LED Off: Power Off 
Alternating Orange and GREEN: F/W upgrade 
Green Solid: Power On, No F/W upgrade 
Status LED Red Solid: System powering up, bootloader stage 
Red Flashing: RFID module not available, Linux system operation in progress. 
Green Flashing: Ready to connect with the utility 
Green Solid: Connected, no errors 
Wi-Fi LED Off: No Wi-Fi connected 
Green Solid: Wi-Fi connected 
Red Flashing: Data Transmission 
User LED Controlled by User 
Antenna LED Off: Antenna isn't operating 
Green Solid: Antenna is operating