c. Adjusting Temperature
i. STEP 1 – Press
1. An audible BEEP will be heard
2. Screen will flash
ii. STEP 2 – Press to increase or decrease the temperature depending on
requirements
iii. STEP 3 – Temperature will now be set
d. Turning o the appliance
i. STEP 1 – Press & hold
1. An audible BEEP will be heard
2. Screen will turn o
3. Fan will turn o aer approximately 30 seconds
6. Important Information
a. Tips & Tricks
i. Place the appliance on a flat surface when in operation.
ii. For eective use it is best to cool the unit overnight with nothing inside of it.
iii. Let warm foods cool down first before placing them in the appliance.
iv. Place cooler in a well-ventilated area which is protected from heat and direct sunlight.
v. Try to minimize the frequency in which the cooler is opened.
vi. Avoid setting the target temperature unnecessarily low.
b. Cleaning & Maintenance
i. To clean the inside or outside of the cooler, use a damp cloth and warm water
containing a mild non-abrasive household detergent. Take care that water does
not enter any vents or electrical connections.
1. DO NOT submerge or rinse the appliance under water, in a bowl or sink.
2. DO NOT use hard objects (such as brushes or scouring pads), abrasive cleaning
agents or bleach to clean the cooler.
3. ALWAYS turn o power and remove the plugs from the cooler before cleaning
or servicing the unit.
c. Disposal
i. Place the packaging material in the appropriate recycling waste bins wherever
possible.
ii. If you wish to dispose of the appliance, ask your local recycling center or specialist
dealer for details about how to do this in accordance with the applicable
disposal regulations.
d. Technical Data & Specifications
7. Troubleshooting
a. The following checklist will help you identify the source of the problem with your
United Pacific Thermoelectric Cooler. If problems persist aer these troubleshooting
tips, please contact you nearest United Pacific dealer.
i. The appliance does not appear to function, and the internal fan cannot be heard.
1. Check the input power source:
a. Check that the cooler switch is turned on
b. Check the fuse located in the 12V plug is operational and not damaged.
Replace if required (Glass Fuse 5mmx 20mm F10A/250V).
c. Check the 12V socket fuse in the vehicle or on your power supply is not
damaged.
d. Check all cable connections, repair or replace as required.
e. Try the appliance on an alternate power source.
2. The thermoelectric system is defective, or the integrated electrical system is
defective:
a. Contact the dealer or retailer from which the purchase was made to file any
warranty claim.
ii. The appliance does not appear to be operating however the display is illuminated
and the internal fan can be heard.
1. The ambient temperature is above the maximum level:
a. Check the temperature and move to a cooler location.
b. Ensure the vents are not blocked or obstructed.
c. Remove some of the items in the internal cabinet to reduce the thermal
mass.
8. Warranty
a. Your United Pacific Thermoelectric Cooler is covered by a one year warranty, from
date of purchase. Warranty is only available to the original purchaser and is not
transferable. If a defect appears in the manufacture or assembly of the product
before the end of the warranty period and United Pacific finds the product to be
defective in materials or workmanship, United Pacific will, at its sole discretion, re
place or repair the product or defective part of the product free of charge.
b. The original purchaser must provide a copy of the original proof of purchase
(e.g. invoice/receipt) verifying the original purchase date and purchase amount;
additional information may be requested to process your claim.
c. The original purchaser should first contact the dealer or retailer from which the
purchase was made to file any warranty claim.
d. Any shipping, freight or border/customs fees or charges paid by the customer as
part of the original purchase are not covered under warranty and therefore will not
be reimbursed as any part of a warranty claim.
e. United Pacific reserves the right to replace a defective part of the product with
parts and components of similar quality, grade and composition where an identical
part is not available. Refurbished parts may be used to repair the product.
f. The product may need to be sent for testing to assess the defect before determining
any claim. Faults or defects caused by product modification, misuse and abuse,
normal wear and tear or failure to follow user instructions are not covered under
this warranty.
082718 V1
Specs Item #99122
Power 12V DC, 110V AC
Volume 23 quarts
Power Consumption 4.8 Amps
Cooling 35°F at 77°F ambient
Heating 120°F-150°F
Insulation PU Foam
Equipped with long life brushless motor (30,000 hours)
Digital display, 5V output for charging phone
