D. Timer Push Button
E. Louver settings Button
OPERATING INSTRUCTIONS
1. The Power indication light will turn on in green when the unit is plugged in,
regardless of whether the unit is operating or not.
2. Press the button once to start operation, the default humidity level is 60%. Press it
again to stop operation.
3.press button as follows：
Press to set the desired fan speed. It can be adjusted between high speed and low speed.
4.Press Adjustable Humidity Push Button
Press to set the desired humidity level in the room, which can be set in the order of:
60%, 65%, 70%, 75%, 80%, 40%, 45%, 50%, 55%, 60%. When the relative humidity in
the room is lower than the selected humidity, the operation of the unit will stop
automatically.
5.press button can be timer setting：
Press the button to program the time when the unit turns on and turns off. If you want to
cancel the timer programming, press the button to adjust the time at 00, and press the
button ,it will be circulate from 00-01-02……23-24.It is the programmed time to switch the
machine. The programmed time will be cancelled when to switch compressor manually
each time. The programmed time remains unchanged if the machine stops to wok due to
water full or during defrosting
6. Press louver settings as follows：
press to set the louver settings the indication light。
