Unitone PVR24CFLSR User manual

CONTENTS
1. SAFETY PRECAUTIONS........................................................................................................1
2. FEATURES.................................................................................................................................2
3. PACKING LIST.........................................................................................................................3
4. NAME AND FUNCTION OF EACH PART...........................................................................4
4.1 MPEG4 DVR - FRONT VIEW ....................................................................................................4
4.2 MPEG4 DVR –SIDE VIEW.....................................................................................................5
4.3 WHEN MPEG4 DVRAPPLIED TO AUTO INSTALLING GUARD AGAINST THEFT RECORDING......6
4.4 MPEG4 DVRAPPLIED TO FALLING BACK MOTORCAR OR RECORDING ....................................7
4.5 MPEG4 DVRAPPLIED TO POCKET DATUM AND MESSAGE INVESTIGATION..............................7
4.6 MPEG4 DVRAPPLIED TO HOME GUARD AGAINST THEFT RECORDING.....................................8
4.7 MPEG4 DVRAPPLIED TO VISIBLE DOORBELL ........................................................................8
5. CONFIGURATION...................................................................................................................9
6. OPERATION............................................................................................................................10
6.1 POWER ON............................................................................................................................10
6.2 LIVE MODE ...........................................................................................................................10
6.3 RECORD MODE......................................................................................................................11
6.4 PLAYBACK MODE..................................................................................................................12
6.5 PC PLAYBACK.......................................................................................................................14
6.6 CF CARD MAINTENANCE ......................................................................................................14
6.7 HOW TO DOWNLOAD THE UPDATE SOFTWARE.......................................................................14
7. MENU SETUP..........................................................................................................................15
7.1 MAIN MENU..........................................................................................................................15
7.2 DATE/TIME............................................................................................................................15
7.3 MOTION DETECTION .............................................................................................................16
7.4 RECORD SETUP......................................................................................................................17
7.5 CF CARD FUNCTION..............................................................................................................18
7.6 SYSTEM STATUS DISPLAY......................................................................................................18
7.7 RETURN TO FACTORY DEFAULT VALUE..................................................................................18
8. SPECIFICATION....................................................................................................................19
8.1 WIRELESS MPEG4 DVR.......................................................................................................19
8.2 WIRELESS IR CAMERA..........................................................................................................20
9. TROUBLESHOOTING ..........................................................................................................21
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does it make a commitment to update the information herein.

1
1. SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN!
CAUTION :
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT OPEN COVERS (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: The lightning flash with an arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of un-insulated “dangerous
voltage”.
CAUTION: The exclamation point within an equilateral triangle is intended to alert the
user to presence of important operating and maintenance.
Do not Plug and unplug the power cord, it may result product malfunction.
Do not install the product in an environment where the humidity is high.
Unless the product is waterproof or weatherproof, otherwise poor image quality may
occur.
Do not drop the product or subject them to physical shocks.
Except for vandal-proof or shockproof product, otherwise malfunctions may occur.
Never keep the product to direct strong light.
It can damage the product.
Do not spill liquid of any kind on the product.
If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that
corrode the electronic components.
Do not install the product in extreme temperature conditions.
Use the camera under conditions where temperatures are between 0∘C(32∘F ) ~ 4 5 ∘C.(113∘F ) .
Be especially careful to provide ventilation when operating under high temperatures.
Do not replace or remove the antenna at will.
It can damage the product.
It is advised to read the Safety Precaution Guide through carefully before operating the product,
to prevent any possible danger.

2
2. FEATURES
zThe kit includes one MPEG4 DVR and one camera both build in 2.4 GHz wireless
modules. The effective wireless transmission range of audio/video signal up to 50 M
in open area.
zThe camera builds in IR LED whose effective lighting distance is around 5 M. The
video image is distinguishable even at dark place.
zThe portable DVR builds in 2.5” Color TFT-LCD panel, speaker, and 4xAA battery
power supply. There is no limitation for the place you can see the video and hear the
voice wireless transmitted from the camera.
zThe DVR supports NTSC or PAL video system, and auto detects video loss. AV line
in or 4 channels RF input source is selectable.
zThe DVR builds in MPEG4-SP video and G.726 audio codec. It supports 1 channel
video and 1 channel audio record and playback operation. For 128 MB CF card, the
record time is about 40 minutes at Middle Quality for NTSC: 30 fps @ 352 x 240 and
PAL: 25 fps @ 352 x 280.
zAudio/ Video data are recorded directly on the Compact Flash card with FAT16 file
system and ASF file format. You can backup the data to a PC, and playback those
ASF files with popular media players.
zRecording date and time are video overlay with video images in ASF files.
zThe DVR supports: manual, motion detection, and schedule recording mode with
independent video size, quality, and frame rate set up.
zFor motion detection, multiple detection blocks and appropriate motion trigger level
can be set up.

3
3. PACKING LIST
Check to make sure all of the items shown below are included in your Portable Security
Recorder Kit. If something is missing, contact your dealer as soon as possible.
Item Description Item Picture QTY
Wireless Portable MPEG4
DV R
1
Wireless IR Camera optional
Audio /Video Cable
2
Car cigarette charger cable
1
Permanent power cable in car
1
Reinforce bracket for
recorder 1
Round magnet
reinforce bracket for recorder 1
PowerAdapter 12V/ 1A
(DVR & Camera) 2
User Manual
1

4
4. NAME and FUNCTION of EACH PART
4.1 MPEG4 DVR - Front View
(1) LCD ：2.5” COLOR TFT-LCD
(2) POWER LED ：Lights when POWER ON.
(3) STATUS LED ：Lights when recording, flashes when
storage or otherwise unlit.
(4) RECBUTTON ：Press to start recording.
(5) PLAY/ PAUSE /BUTTON ：Press to pause or restart playback.
(6) DISPLAYBUTTON ：Press to switch ON/ OFF status info or
LCD monitor.
(7) STOP/ EXITBUTTON ：Press to stop playback or recording.
Press to exit the menu.
(8&11) SVOL + / ▼VOL – BUTTON ：Press to adjust the volume level.
Press to move the cursor up or down.
(9&13) CH- / CH+ BUTTON ：Press to switch camera channels
Press to fast forward or fast rewind.
Press to step play.
(10) MENU/ ENTER BUTTON ：Press to enter menu setup.
(12) ANTENNA
(14) BUILD-IN SPEAKER.

5
4.2 MPEG4 DVR – Side View
(1) INPUTSOURCE:SwitchestoRForAVcameras.
(2) AV IN:
Audio/Video IN: 3.5 mm ∅jack for audio/ video line in.
(3) AV OUT:
Audio/Video OUT: 3.5 mm ∅jack for audio/ video line out.
(4) VIDEO SYSTEM: Switches video system to NTSC or PAL format.
(5) POWER ON: Switches power to ON or OFF.
(6) DC 12V IN: Power input.
(7) Compact Flash Card Slot.
Video Out
Audio Out
AV Out
Video In
Audio In
AV In

6
4.3 When MPEG4 DVR applied to Auto installing guard against
theft Recording configuration Device
1.Installing Suction Cup on 2. Installing Suction Cup on 3.Installing MPEG4 DVR
Autoglass motorcar batteries
4.Installed on the side of glass 5.Installed in drawer, and wireless 6. Camouflaged at the back of Auto,
Recording andwirelessrecording
6. Put camera under windscreen 7.when put cameraside 8.Selectangle from left to right
Takethefullmotorcarphotos takesidephotos
Selectable and adjustable
9.Camera usage at the back 10.Pragmatic taking photos in Car 11.Work when the power of camera inserted
of motorcar

7
4.4 MPEG4 DVR applied to falling back motorcar or recording
motorcar driving configuration Device
MOTORCAR-BRAND EASEL OF CAMERA INSTALLMOTORCAR-BRAND,AND THEN CAN
BACKA CAR
4.5 MPEG4 DVR applied to pocket datum and message investigation
Configuration Device
Install Button Lens camera Install Pinhole Lens camera

8
4.6 MPEG4 DVR applied to home guard against theft recording
Configuration Device
Install camera at the corner of home Safe-guard housekeeper and take care of older
No need to have wire connected, installed Home guard against theft, can receive 4 cameras,
Information of From every angle easily , and synchron-record video and audio
Makechildrensafely
4.7 MPEG4 DVR applied to visible doorbell Configuration
Device
Wireless camera at the doorway
Wireless surveillance recording- MPEG4 DVR
Looking on from every angle
Putting on/off recording video and time/date are
adjustable

9
5. CONFIGURATION
(1) RF Camera: Switch INPUT SOURCE to “RF”.
Install onto high position, to reduce effects on transmission quality and free from
motion interference.
When low signals occur, please adjust the antenna to the appropriate angle for
the optimum receiver/ transmission performance.
(2) AV Line In: Switch INPUT SOURCE to “AV”.
Audio/ Video Transmission

10
6. OPERATION
6.1 Power On
1. Before power on, please check the local area video system (NTSC/ PAL). The
VIDEO SYSTEM is situated on the right side panel; this setup will affect the video
system input and output.
2. The power switch is situated on the right side of the device (switch “ON” to
power-on and “OFF” to power-off).
NOTE: Each time after power-on, the system auto-detects its peripherals. When the status LED
flashes indicates that the CF card is proceeding testing (complete boot time is 2 seconds)
When an image file error has been detected, the CF card will suggest the user to initiate
repair using the computer or use the Repair/ Format function supported by the device【CF
Card Management:Repair/ Format function.】
3. The user may use AV/ RF switch to select the video input system.
4. Live mode is the pre-set mode after power-on. When it is currently under schedule
recording, system auto enters recording mode.
Do not withdraw the CF card while booting. It may destroy the data stored
within the CF card.
When no images are displayed on the LCD monitor, please check the video
source (line in or RF1~RF4) and NTSC/ PAL switch.
6.2 Live Mode
1. Live mode is the default setup after system start-up. User may view live images,
setup the receiving channel of the camera and adjust the sound volume.
(1) Two types of video input source (RF/ AV): Switch to “RF” for connecting to
RF camera and “AV” to line input camera.
AV IN The device supports one line input camera.
RF1 ~ RF4
The device supports portable wireless (RF) camera (maximum
connection of 4 RF cameras). Press《》or《》button to switch
between cameras (RF1 ~ RF4).
(2) Sound volume: The user may press《》or《》button to adjust the volume of the
build-in speaker.
(3) Monitoring Display: Press《DISPLAY》button to switch ON/ OFF LCD display
mode or OSD info.

11
2004 / 02 / 01 08 :10 :03

1
2
3
1Time Display: System Date and Time.
2Record Status Display:
: Connect the camera to theAV terminal.
: Record Resolution, please refer to【7.4 Record Setup】for VIDEO SIZE setup.
: Record Quality, please referto【7.4 Record Setup】for VIDEO QUALITYsetup.
: Audio Off Record, please refer to【7.4 Record Setup】for AUDIO RECORD
setup.
3CF Card Status:
CF Card has not been inserted or malfunction
CF Card is proceeding file testing.
CF Card is functioning normally.
Disk full and overwrite record.
6.3 Record Mode
1. Start Record: 3 Types of recording mode.
(1) Manual Record: Suitable recording at anytime. Press《REC》button, to enter
manual recording status (start recording). For more information, please refer to【7.4
Record Setup】.
(2) Motion Detection Record: Suitable to record, when there are severe image changes.
Motion detection triggers schedule recording, but it will only start recording when
the variation exceeds the alarm limitation value. For more information, please refer
to【7.3 Record setup】and【7.4 Record Setup】.
(3) Continuous Record: Suitable on few constant frame recording or on long-term
continuous recording. For more information, please refer to【7.4 Record Setup】.
2. Stop Record: Press《STOP》button. It stops all types of recording. To continue
recording, please follow the methods below to restart recording.
(1) Start to Record:
Manual Record Under supervising status, press《REC》button.
Schedule Record
Motion Detection Record
Records only within the setup time range.
(2) Stop Record : press《STOP》button will stop recording, and if you want to

12
record again, please refer to the details shown below:
Manual Record Repress《REC》button.
Schedule Record
Motion Detection Record
Whether the setup has been changed or not, the
system will auto re-check the record schedule
setup again.
3. Record Display：
2004 / 02 / 01 08: 10 :03

Indicates recording is in progress.
Indicates the status of the event that has been triggered.
4. The event status is determined by the system recording, according to the order of
priority. The order of priority: Manual Record, Motion Detection and then Schedule
Record.
5. Different recording modes may have different kinds of setups. Basic setup: video size,
recording frames, video quality, and audio recording. When different recording modes
are triggered, the system starts recording according to the different setup. This kind of
design provides flexibility to ensure efficient recording time and quality.
Example: Work hour from 8:00am to 6:00pm, setup「Schedule Record」to low video
quality with less recording frames to extend the recording time. And off work hour,
setup 「Motion Detection Record」to enable high video quality with the highest
recording frames, when an event occurs.
6. Video or audio may be recorded into the CF card (CF card is purchased separately).
When the video has been stored, the status LED flashes indicates that the system is
currently loading the file into the CF card.
Do not withdraw the CF card while recording. It may destroy the data stored within
the CF card.
Power loss during recording results incomplete videos or errors.
Video loss during recording, the system stops recording, backups the files, and
when the videos are normal again, the system will continue recording.
6.4 Playback Mode
Selectable Playback foramt: Continuous Playback and Searching Playback.
A. Normal Playback: Press《》button to playback according to the CF card file order recorded.

13
2004 / 02 / 01 08: 10 :03
 : Normal speed playback.
 : Fast Rewind and Fast Forward (Speed: x2/ x4/ x8/ x16/ x32).
Press《》button to return to normal speed playback.
: During playback, press《PAUSE》
b
utton to pause playback and press it twice
to return to playback status.
 : During pause, press《》or《》button to step back one frame or to step
forward one frame and press《》button to return to normal speed playback.
DISPLAY : Switch to「Hide Status Info.」,「Hide LCD Monitor」, and「Display LCD
Monitor and Status Info.」.
Press《STOP》button to stop playback function and to return to live status.
B. Search and Playback:
SEARCH AND PLAY ■■
DATE F I LES
Z
2003 / 12 / 25 5
2003 / 12 / 26 15
2003 / 12 / 27 2
2003 / 12 / 28 3
2003 / 12 / 29 7
PAGE : 1 / 3
F I LE : 038
TIME:09:18:09
1
2
35
4
(1) File directory shows dates and the amount of contents under the directory. The
user may press《》or《》button to move the cursor up or down.
(2) Current location page.
(3) Each color distinguishing different recording events, the user may press《/ +》
or《- / 》button to move the cursor left or right and immediately shows the first
image of the highlighted event on the screen display background.
(4) Displays the time highlighted by the event bar.
(5) Blue: Manual Record/ Red: Motion Detection Record/ White: Schedule Record.
Press《STOP》button to stop playback and the system will return to【SEARCH and
PLAY】selection and enables the user to select the prefered input source.
Withdrawing the CF card during playback, stops playback and enters the
monitoring mode.
The device supports playback only to images recorded by our device, other
ASF video files are not guaranteed.

14
6.5 PC Playback
1. The device uses CF card as its main storage. User may read the data stored in the CF
card from the computers that supports CF card reader device.
2. All files have approximate size of 1MB and file names are ordered according to
recorded times (sequence).
File Playback：User may use Microsoft®－Media Player or DivX－DivX Player
(http://www.divx.com/) to playback video files.
Backup
layback：may playback backup files from the computer (copy files to the
CF card under ASF folder).
When first time using Media Player to playback, it requires the most updated decoder
from the Microsoft®software website.
6.6 CF Card Maintenance
1. The device supports only FAT16 file system; therefore it is unable to determine other
file systems. Please proceed the function【MENU / CF CARD OPERATIONS】, or
use the computer to format the CF card to FAT16 file system.
2. The system supports only partial CF card file system repair. The system is unable to
detect any file system damage, therefore please format the function by entering
【MENU / CF CARD OPERATIONS】and select Repair/ Format, or enter ones
computer to repair the CF card.
Due to special design of the device, the maximum storage capacity is 4GB (since the
maximum storage capacity of a FAT16 file system is 2GB).
6.7 How to Download the Update Software
Use the Compact Flash card to update your system firmware:
(1) Create a new directory under DV directory (:\DV\Hex).
(2) Copy the new system firmware into the new directory of the Compact Flash card from
your computer.
(3) Insert the CF card; switch off the main power and then restart.
(4) Wait for 5 to 6 seconds, the system update will be completed and returns back to live
mode.
Do not switch off the device or withdraw the CF card during system update. When
power loss occurs during step (4), please repeat step (3) and (4) again.

15
7. MENU SETUP
7.1 Main Menu
MA I N ME NU ■
Z
SEARCH AND PLAY >
SET DATE / T IME >
SET MOT I ON DETECT >
MANUAL RECORD >
SCHEDULE RECORD >
CF CARD OPT I ONS >
SYSTEM STATUS >
FACTORY DEFAULT >
12
3
(1) MAIN MENU: Item subject.
(2) Menu Layer Indication: The device consists of three menu layers.
(3) MENU Content: Basic Menu Operations.
Press《▲》or《▼》button, to move the highlight-bar and the cursor (Z).
Press《MENU/ ENTER 》button, to enter the sub menu (＞).
Press《STOP》button:
Under second or third menu layer, the system will return to the previous menu
layer (second layer to first layer or third layer to second layer).
Under main menu (first menu layer), the system will enter live mode.
Press《》or《》button, to increase or decrease the setting values that has been
highlighted.
NOTE: All words underlined and bold indicates「Default Value」.
7.2 Date/Time
DAT E / T I ME ■■
Z
DAT E FORMAT : Y / M / D
SET DATE: 2004 / 01 / 01
SET T IME: 00: 00: 00
1
2
(1) Date Format : Y / M / D M / D / Y D / M / Y
(2) Date/TimeAdjustment : Year settings are from 2000 to 2099.
■: First Menu Layer (Main Menu)
■■ : Second Menu Layer
■■■ : Third Menu Layer

16
7.3 Motion Detection
1. Window setup:
MD AREA ■■■
MOD E : C E L L E D I T
MOD E : P L A Y
1
2
3
4
1Detection Cell: Whole screen is divided into 22x15 square cells.
2Detection Block: Two or more cells form a block.
3Cursor: Press《PLAY》button to switch to Select/ Edit mode.
4Detection Block.
2. Cursor Movement: Press《PLAY》button, switch cursor to setup mode (cursor color is
black). Press《▲/ ▼/ / 》button to move the cursor freely.
3. Detection Area Setup:
(1) Press《PLAY》button to select edit detection block function.
FUNCTION DESCRIPTION
CELL EDIT Single detection cell setup (detection/ non-detection)
DELBLOCK Disable a block.
DELALL Disable all cells.
ADD BLOCK Enable a block.
ADDALL Enable all cells.
(2) Press《PLAY》button, switch cursor to edit mode (cursor color is pink). Press《▲/ ▼
/ / 》button, follow step (1) to change the size of the detection block.
(3) Detection area is displayed by color red and non-detection area by color blue.
4. When a detected object is moving in the detection area, detection area turns from red to
transparent (color turns from red to transparent indicates moving status).
5. Video Detection Block Sensitivity Setup:
Changing the alert value setup may affect the recording sensitivity of the Motion Detection.
MD S EN S I T I V I T Y ■■■
MD ENERGY : 0%
MD T HRE SHOL D : 1 0%
THRESHOLD L :←R:
→
Live Video
THRESHOLDENERGY
1
2
3
(1) Sensitivity Bar : Color black indicates image variable value and color red
indicates the MD threshold.
(2) MD Energy : Current image variation value.

17
(3) MD Threshold : Press《》or《》button, to change the motion detection
threshold value.
7.4 Record Setup
Selectable manual or schedule recording, basic setups are shown below:
1. Manual Record:
MANUAL RECORD ■■
Z
VIDEO SIZE:704X240
FRAME RATE : 1 2FPS
QUL I TY : M I D I UM
AUD I O : ON
1
2
3
(1) Video Size/ Frame Rate:
NTSC 320x240 704x240 704x480
FRAME RATE (MAX) 30 F/ S 12 F/ S 6 F/ S
PAL 320x280 704x280 704x560
FRAME RATE (MAX) 25 F/ S 12 F/ S 6 F/ S
(2) Image Quality:
HIGH QUALITY HQ Using high recording quality (More CF
card storage capacity will be required)
MEDIUM QUALITY MQ Using medium recording quality.
LOW QUALITY LQ Using low recording quality (Less CF
card storage capacity will be required)
(3) Audio Record: Enable or disable audio recording.
2. Schedule Record: Records only within the setup time range.
SCHEDULE RECORD■
:ON 18 : 00 - 08 : 30
704X240 12FPS
:ON 15 : 00 - 17 : 30
704X480 3FPS
MO T I O N R E CO R D >
CONT I NUE RECORD >
MOT I ON R E CO RD ■■■
Z
RECORD : ON
SCHEDULE :
18 : 00 - 08 : 30
DURAT I ON : 5 SEC
VIDEO SIZE:704X240
FRAME RATE : 1 2FPS
QUAL I T Y : M I D I UM
AUD I O : ON
CONT I NUE RECORD ■■■
Z
RECORD : ON
SCHEDULE :
15 : 00 - 17 : 30
VIDEO SIZE:704X240
FRAME RATE : 1 2FPS
QUAL I TY : M I D I UM
AUD I O : ON
RECORD : Enable or disable schedule recording (ON/ OFF).
SCHEDULE :
ab:cd – ab:cd = 24 hour recording and 00:00 – 00:01 = Record of
one minute image from 00:00 to 00:01.
DURATION : Duration time when motion detection has been triggered (1SEC / 5SEC /
10SEC / 20SEC / 30SEC).

18
7.5 CF Card Function
CF CARD OPT I ONS ■■
TOTAL SPACE : 128MB
REMA I N SPACE : 50MB
Z
CF FULL : LOOP
1
2
REPA I R >
FORMAT >
1
2
3
1CF FULL : LOOP
 (continuous recording)/ STOP (stop recording).
When CF card storage capacity is full, it will start overwriting information
from the earliest videos (auto repeating continuous recording).
2REPAIR : Checks internal CF card data and delete error files.
3FORMAT : It will delete all data stored in the CF Card, and create a new
directory under DV directory (:\DV\ASF).
NOTE: Proceeding continuous recording, old videos can be deleted and overwritten. Please
confirm before setup.
NOTE:Recording time depend on the CF card capacity, different recording modes, and
degree of video variation.
7.6 System Status Display
SYSTEM STATUS ■■
SYSTEM VER : V0 . 6
: 704X240 12FPS
:ON 18:00-08:30
704X240 12FPS
:ON 15 : 00 - 17P30
704X480 3FPS
CF FULL : LOOP
1
2
Press any button to return to the Main Menu.
7.7 Return to Factory Default Value
FACTORY DEFAULT ■■
RECALL DEFAULT NOW?
NO:EXIT YES:ENTER
Press《ENTER》button, returns all settings to the factory default value.
Press《EXIT》button, exit this screen display and returns to the Main Menu.

19
8. SPECIFICATION
8.1 Wireless MPEG4 DVR
System NTSC / PAL with Video Loss Auto Detection
Codec MPEG4-SP ASF File Format
Record Frame Rate
1, 2, … , Maximum fps selectable
Maximum
NTSC: 30 fps@352x240 / 12 fps@704x240 / 6 fps@704x480
PAL: 25 fps@352x280 / 12 fps@704x280 / 6 fps@704x560
High Quality Medium Quality Low Quality
20* minutes 40* minutes 60* minutes
Record Quality
* Approximate record time for 128 MB CF card at maximum record
frame rate
Recording Date/Time Overlay with Video Images in ASF File
Input 4 CH RF Selectable / 1 CH Composite Video Line In
Video
Output 2.5” Color TFT-LCD / 1 CH Composite Video Line Out
Sampling Rate 44.1 KHz
Codec G.726 / 32 kbps
Input 4 CH RF Selectable / 1 CH Audio Line In
Audio
Output 8Ω0.5W Speaker / 1 CH Audio Line Out
Storage Media Compact Flash Card (max. 2GB FAT16 / 4GB non-standard FAT16)
Recording Mode Schedule / Motion Detection / Manual
Motion Detection Setting Multiple Blocks and adjustable sensitivity
Event Search Function Property and first image of selected file is displayed
Playback Function Play/Fast Forward/Fast Rewind/Pause/Step Forward/Step Backward
Playback Speed x1 / x2 / x4 / x8 / x16 / x32
2.4 GHz A/V Receiver 4 CH Selectable, -90dBm Sensitivity, 3 dBi Antenna
Power Supply DC 12V± 10% 1A or 4 x AA (Rechargeable Ni-MH / Alkaline Battery)
Power Consumption 5.94W/495mA (RF: 2.46W/205mA, LCD: 1.26W/105mA, Others:
2.22W/185mA)
Weight 264 g (without Battery)
Dimensions 91 mm (W) x 142.5 mm (H) x 30 mm (D)
Operating Environment 80% RH, 0℃~ 45℃(32℉~ 113℉)
(Note: Design and Specifications are subject to change without notice.)