Universal Remote Complete control User manual

Operating Your System
With The KP-900 Wireless
Keypad/Remote

This remote control was
Custom rogrammed for you by:
For questions about your Custom rogramming call:
Custom rogramming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video instal-
lation. It involves an intimate knowledge of how the components interact
and exact details on the proper sequences of control.
Only a Complete Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true automated
operation.
Congratulations on your choice!
K -900 Owners Manual © 2014 Universal Remote Control, Inc.
Front Cover hoto courtesy of Stone Glidden, King of russia and
Doylestown, A
www.stoneglidden.com
The information in this owner’s manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written con-
sent from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR O ERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc.
Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of
their respective companies or organizations.
Universal Remote Control, Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
hone: [phone] Fax: [phone]

TABLE OFCONTENTS
Congratulations 1
Custom Labeled Buttons 1
Optional RF “No Rules” Operation 2
Relocating the Wall Bracket 3
Installing Batteries 3
Programmable only by a URC Certified Professional Installer 4
Selecting a New “Activity” 5
Using the KP-900 to Control an “Activity” 6
Displaying the Setup Screen 7
Selecting from the Setup Screen 7
Setting the LCD 8
Light Settings 10
Sound Volume 10
System Settings 11
Version Information Displays 11
Factory Default 12
Specifications 13
Contact Universal Remote Control 13
Limited Warranty Statement 14
End User Agreement 16
Information to the User 17
Warning 18
Notes: Your Activities 19

Page 1
KP-900 OWNE S MANUAL
Congratulations!
You’ve purchased a unique wireless control. The KP-900 can be used as both
a wall mounted keypad and as a hand-held remote control. The KP-900
achieves a magnificent combination of power and flexibility, simplifying and
automating operation of even the most complex home theater system.
Wall Mounted Keypad and Hand-Held emote Control
Once the wall bracket is securely installed on the wall, simply place the
KP-900 into the bracket. Magnets snap the KP-900 into place. To use as a
hand-held remote control, grasp the KP-900 from the top edge and pull it
away from the bracket.
One Touch Multi-Colored Backlighting
Press any button to backlight the screen and the hard buttons.
Integrated Sound Signaling
The KP-900 incorporates a small speaker for beeps. Anytime you press a
button, the KP-900 signals that it has understood your command with a
beep sound.
Custom Labeled Buttons
The KP-900 is equipped with a bright, easy to read LCD screen which
labels the six buttons to the right of the screen. These button labels change
based on what you are watching or listening to. Thus, if you have selected
Watching TV, you will see a list of buttons that are useful to that activity,
while if you select DVD, the buttons will control the DVD.
Pressing the MAIN button
displays the Main Menu pages of
the KP-900. When you select one
of the activities listed, the entire
functionality of all the
buttons changes to operate the
selected device.

Page 2
KP-900 OWNE S MANUAL
Optional F “No ules” Operation
In combination with a Complete Control RF Base Station, the KP-900 can
control your system without being in line-of-sight of the equipment. On the
wall or off, that means that you never need to point the KP-900.
The MSC-400, the MRF-350 and the MRF-260 RF base stations are compati-
ble with the KP-900. All incorporate RF addressing. RF addressing gives you
the ability to control equipment locations throughout your home, even if they
are concealed in other rooms or are behind closed doors.
3. The base station routes I commands to the correct I
Flasher.
2. The FX-250 F Sensor can be freely
positioned for optimal reception.
1. The KP-900 sends radio
waves in every direction, so
you don’t have to point the
remote anymore!
4. Self-adhesvie “Flashers” affix to the
Infrared sensors on the front panels of
your components. The Flashers relay
commands to components. The flashers
plug into the base station’s rear flasher
line outputs via their 10 foot cables.
Uniquely, U C base stations can also
connect to rear panel I Inputs via their
adjustable I Line Outputs.

Page 3
KP-900 OWNE S MANUAL
elocating the Wall Bracket
A professional installer has the expertise and materials to mount the KP-
900 to any kind of wall material. The KP-900 includes a wall bracket, four
screws and four plastic caps to conceal the screwheads. The included
screws may not be appropriate for your walls.
Before making a hole in your wall, gather the family and evaluate the best
height. Like a thermostat, the KP-900 should be at comfortable eye level
for most of the family, typically between 54” to 62” from the floor to the
top of the bracket (60” is typical).
Use a bubble level and a pencil to draw a line on the wall, then hold the
bracket in place. Screw in the four screws and cover the screw heads with
the included self adhesive caps.
Metal discs in the bracket and magnets in the keypad keep the KP-900
securely in place, yet make it easy to remove when you need a hand-held
remote control.
Installing Batteries
There are two battery compartments on the rear of the KP-900. Each com-
partment holds two AAA batteries for a total of four AAA batteries.
Open each battery cover by pressing the release and pulling back the
cover on the back of the control. Remove the cover.
Observe the + and - polarity indicators on the batteries.
Place a battery into the compartment with the positive (+) terminal facing
the bottom of the KP-900. Slide the battery up into the top position and
insert the second battery into place.
Now, replace the battery cover by inserting the hinged end in first, then
snapping the cover back into place.
Repeat the process with the second battery compartment.

Page 4
KP-900 OWNE S MANUAL
Programmable only by a U C Certified Professional
To fully automate your audio/video system, the programmer must have
detailed knowledge of each component as well as how the system is
connected and operated. Only a trained and certified professional
audio/video installer can install a KP-900 remote control in a timely
and efficient manner.

Page 5
KP-900 OWNE S MANUAL
Selecting a New “Activity”
The KP-900’s MAIN button displays the activities you can control with your
KP-900. When you want to listen to the radio or to a CD, touch the MAIN
button and select what you would like to listen to.
Your installer will have programmed the button you pressed to totally con-
figure your system to watch or listen to whatever you selected. Now the
screen will change, and all of the LCD buttons will be reconfigured to
give you full control of your system while watching or listening to your
selection!
Press the PA E button to see any other available choices.
PAGE DISPLAY
At the bottom of the LCD screen, the
page display informs you if there are
other pages of buttons available.
Optionally, your installer may have
programmed two groups of activities
(i.e Watch and Listen). To access
either group, simply touch the
MAIN button again. The MAIN but-
ton cycles the display from Watch to
Listen, then back to Watch.
When you press the MAIN button,
you can see the most frequently used
activities in your system.

Page 6
KP-900 OWNE S MANUAL
The LCD button
labels describe
special features
for this activity.
Using the KP-900 to Control an “Activity”
Once you’ve selected a new activity, the KP-900 displays the title of the
activity at the top of the screen. Below the title, the LCD displays the cus-
tomized names of any special features you need for the activity. All the
hard buttons of the KP-900 have now changed to functions optimized for
this activity.
The Title displays
what activity you
can control.
Each activity can
have many pages of
LCD labeled but-
tons. At the bottom
of the LCD the
page number is dis-
played.
All of the KP-900’s hard buttons change their function and now control the selected activity.
Press the PA E but-
ton to use the other
pages of LCD
labeled buttons.

Page 7
KP-900 OWNE S MANUAL
Displaying the Setup Screen
You can adjust the settings of the KP-900 whenever you like by pressing and
holding both the MAIN and the SELECT buttons at the same time for three
seconds. When you do, the screen will change to the SETUP screen. If you
do not press any button on the SETUP screen within 30 seconds, the KP-900
will time out and automatically return to normal operation. You can return to
normal operation before that by pressing the MAIN button.
Selecting from the Setup Screen
Simply touch the button for the setting you’d like to adjust:
At the same time, press and
hold both the MAIN button
and the SELECT button.
When the SETUP screen
appears, you can release the
two buttons.
LCD - The appearance of the
screen.
LI HT - The timing of the LCD
and Button Backlighting
SOUND - The volume of the
beeps.
SYSTEM - The battery low
warning.
VERSION - No adjustments are
possible. Displays factory info.
FACTORY - Erases current con-
figuration permanently and
installs a factory test file.

Page 8
KP-900 OWNE S MANUAL
Setting the LCD
With these settings, you can set the KP-900 to constantly display the LCD
when not in use, or show a blank screen when not in use. Additionally, you
can control the contrast of the screen and the color of the backlighting.
To activate the LCD On/Off setting, press
this button. See below.
To activate the CONTRAST setting, press
this button. See the next page.
To activate the COLOR setting, press this
button. See the next page.
To exit without saving any changes you
have made, press EXIT.
To exit without saving any changes you
have made, press EXIT.
To change the timer interval, press the
LEFT or RI HT arrow keys.
If you set the LCD to OFF, the timer
settings will appear. The LCD will go
blank after waiting the interval you set
here by adjusting the LEFT and RI HT
arrow keys.
The timer can be set to turn off the LCD
To save any changes you have made,
press SAVE.
LCD Timer Setting:
The Timer Interval is displayed here.

Page 9
KP-900 OWNE S MANUAL
Setting LCD Contrast
You can adjust the contrast of the LCD screen using the LEFT and RI HT
arrow keys once the LCD contrast screen has been selected (shown on the
previous page).
Setting LCD Color
Typically, the LCD color settings are controlled by the PC Editor. However,
by selecting USER instead of Software, then selecting the EDIT option, you
can adjust the color of the backlighting via this Setup page:
The current CONTRAST is
displayed here via a bar graph.
Adjust the CONTRAST setting with
the LEFT and RI HT keys as shown
in the previous pages.
To exit without saving any
changes you have made, press
EXIT.
To save any changes you have
made, press SAVE.
To exit without saving any
changes you have made, press
EXIT.
To SAVE any changes you have
made, press SAVE.
The current Red, reen and Blue
settings are displayed here as a
bar graph. Simply, select the color
you’d like to adjust by pressing
the corresponding button, then
use the LEFT & RI HT arrow keys
as shown on the previous pages
to adjust the level.

Page 10
KP-900 OWNE S MANUAL
Light Settings
You can adjust the backlighting of the remote in two additional ways:
1. You can turn on/off the LCD and the hard button backlighting.
2. You can select the amount of time the lighting stays on after the last button
press from a range of values between 10 seconds and 90 seconds.
Sound Volume
Your KP-900 beeps whenever a button is pressed. However, you can
adjust the volume of the beep to one of four levels as shown here:
The current Beep volume is dis-
played here as a “bar”.
OFF
SLI HT BEEP
MODERATE BEEP
LOUDEST BEEP
Adjust the volume of the beep by
tapping the LEFT and RI HT arrow
keys as shown in the previous
pages.
The current timer setting is
displayed here in seconds.
Adjust the backlighting timer setting
with the LEFT and RI HT keys as
shown in the previous pages.
Change whether the backlight-
ing is on or off by pressing this
button.
If you want the backlighting
always OFF, set it to OFF.
If you would like the backlight-
ing on, select ON.

Page 11
KP-900 OWNE S MANUAL
System Settings
You can set your KP-900 to display the Low Battery warning at a power
level between 0% and 20% (in 5% increments).
To exit, press MAIN.
To exit, press MAIN.
Press here to adjust the battery
warning level.
The Memory bar indicates
available memory with Black.
The memory in use is White.
The Power bar indicates avail-
able power with Black.
Version Information Displays
Should you be curious, the Version indicates what firmware and software
versions were used to program your KP-900.

Page 12
KP-900 OWNE S MANUAL
Factory Default
Warning! This should only be done in preparation for a new PC Editor ses-
sion, your configuration will be completely erased. It will be neccessary to
reinstall the original configuration file using a windows PC equipped with
KP-900 Editor and a copy of the original file.
To exit, press MAIN.
Press here to erase your config-
uration and load the factory
configuration.
Press here to return to the
Setup Menu.

Page 13
KP-900 OWNE S MANUAL
Specifications
Memory - 4 Megabits of Flash Memory (for User Configuration)
Devices and Pages: Flexible, typically supports up to 400 completely
filled pages (standard IR commands). Pages can be distributed into up to
255 devices.
Learning Capability - Standard frequencies (15kHz to 460kHz)
Macro Capability - Up to 255 steps each, however nesting is allowed,
thus real macro length is unlimited.
Backlighting - Blue for all buttons, 256 color backlighting for the LCD
IR Range (line of sight via infrared): 30-50 feet, depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 418MHz
Weight: 14 ounces (with batteries)
Size (KP-900 only): 4-11/16” H x 5-7/16”” W x 9/16” D
Size (KP-900 with the wall bracket): 4-5/8” H x 6-1/16”” W x 3/4” D
Batteries: 4 AAA batteries
Contact Us
Need assistance or have questions?
Our Customer Service Support Center is here to help.
Call [phone] to speak with a customer service
representative or email us at [e-mail]
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: [phone] Fax: [phone]
www.universalremote.com

Page 14
KP-900 OWNE S MANUAL
Limited Warranty Statement
1. Limited Warranty and Disclaimers
Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be
free from defects in material and workmanship under normal usage for one (1)
year from purchase when such is purchased from URC. This limited warranty is
valid only in the United States of America. URC warrants that the software will
substantially conform in any material respect to its functional specifications at the
time of delivery. URC SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS AND/OR OMISSIONS MADE IN THE
URC DOCUMENTATION. URC DOES NOT WARRANT THAT THE URC
SOFTWARE IS BU -FREE OR ERROR FREE OR THAT THERE ARE NO
ERRORS/BU S IN THE URC SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the URC
software complied with all applicable regulations and policies of the Federal
Communications Commissions (“FCC”) regarding electromagnetic interference
caused by electronic/computing devices and to the extent that the URC
equipment and/or the URC software fails to so comply, URC shall, at its own
expense, take all reasonable measures to promptly cause such to comply.
U C equipment purchases from other than an authorized U C dealer or
distributor are without warranty.
THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE
FOR HARDWARE OR SOFTWARE USA E EXCEPT AS EXPRESSLY PROVIDED
FOR HEREIN, THE EQUIPMENT, SOFTWARE AND DOCUMENTATION OF
URC ARE SUPPLIED “AS IS” WITHOUT ANY WARRANTY, EXPRESS,
STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDIN BUT NOT
LIMITED TO THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. URC DOES NOT WARRANT, UARANTEE, OR
MAKE ANY REPRESENTATIONS RE ARDIN THE USE OF, OR THE RESULTS
OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE
SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR
IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS,
STATUTORY OR IMPLIED, INCLUDIN BUT NOT LIMITED TO THE
WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR
OUTCOME OR RESULTS.

Page 15
KP-900 OWNE S MANUAL
WITHOUT IN ANY WAY LIMITIN THE ENERALITY OF THE OTHER
PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMA E FROM
MISUSE, NE LECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III)
INTE RATION WITH THIRD PARTY CONTENT (IV) BEYOND THE
WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY
CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end user in
whole or in part, where such are restricted or excluded by applicable law and
such shall apply to the maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the URC
equipment using new or comparable rebuilt parts, or exchange the URC
equipment for new or rebuilt equipment. In the event of a defect, these are the
end user’s exclusive remedies.
All the URC equipment returned for service, exchange or repair require an R A
number. To obtain an R A number, you must complete a Return Request Form
which you may obtain by calling [phone] or contacting URC at
[e-mail]. To obtain warranty service, end user must
deliver the URC equipment, freight prepaid, in its original packaging or packaging
affording adequate protection to URC at 420 Columbus Avenue, Valhalla, NY
10595. It is end user’s responsibility to backup any macro programming, artwork,
software or other materials that may have been programmed into the unit. It is
likely that such data, software, or other materials will be lost during service and
URC will not be responsible for any such damage or loss. A dated purchase
receipt, bill of sale, installation contract or other verifiable proof of purchase is
required. For the URC equipment support and other important information, please
visit URC's website available at www.universalremote.com or call the Customer
Service Center at [phone].
This limited warranty only covers the URC equipment issues caused by defects in
material or workmanship during ordinary consumer use. It does not cover product
issues caused by any other reason, including but not limited to product issues due
to commercial use, acts of od, third-party installation, misuse, limitations of
technology, or modification of or to any part of the URC equipment. This limited
warranty does not cover the URC equipment sold as used, as is, refurbished, so
called "B stock" or consumables (such as batteries). This limited warranty is invalid
if the factory applied serial number has been altered or removed from the URC
equipment. This limited warranty specifically excludes the U C equipment sold
by unauthorized resellers.
With the exception of URC’s IR-only, broad-based consumer remotes, none of
URC’s PC programmable remotes or any of our Total Control® whole-house
equipment are authorized for online internet sales. Buying URC’s PC

Page 16
KP-900 OWNE S MANUAL
programmable remotes or any of our Total Control® whole-house equipment
online means buying equipment that does not have a URC’s limited warranty.
Such equipment is not eligible for URC tech support or software support, either.
2. U C’S Limitations of Liability
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL,
EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMA ES OF ANY KIND OR
LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED
OF THE POSSIBILITY OF SUCH DAMA ES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMA E TO DATA,
COMPUTER SYSTEMS OR COMPUTER PRO RAMS.
URC’S LIABILITY, IF ANY, FOR DIRECT DAMA ES OF ANY FORM SHALL BE
LIMITED TO ACTUAL DAMA ES, NOT IN EXCESS OF AMOUNTS PAID BY
END USER FOR THE URC EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDIN ANY INSTANCE OF FORCE MAJEURE.
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF
END USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN
WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR
EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY
OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMA ES, OR ALLOW
LIMITATIONS ON HOW LON AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER.
THIS LIMITED WARRANTY IVES END USER SPECIFIC LE AL RI HTS AND
END USER MAY HAVE OTHER RI HTS WHICH VARY FROM STATE TO
STATE OR JURISDICTION TO JURISDICTION.
End User Agreement
The terms and conditions of the End User Agreement available at
www.universalremote.com/eua.php shall apply.

Page 17
KP-900 OWNE S MANUAL
Information To The User
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio com-
munications.However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.