Universal Remote SL-9000 User manual

SL-9000
Operating
Manual
Home Theater Master
Home Theater Master
Pr
Prepr eprogrammed & Lear ogrammed & Learning ning
Remote Contr
Remote Control ol

Page
Introduction 2
Battery Installation 3
A. To Open and Close Battery Compartment Cover 3
B. Low Battery Message 3
Using Your Remote Control 4
A. Function Table Reference 4
Function Tables 5
B. Preprogrammed Set Up 8
Three Digit Code Method 8
Recalling the Set Up Code Number 12
C. Learning Set Up 13
Learning New Functions on the Main Keypad 13
Learning New Functions on Device Buttons 16
Erasing Learned Functions 17
Erasing Individual Buttons 17
Erasing All Buttons in One Device Mode 18
Erasing All Buttons in All Device Modes 18
D. Operation 19
Device Buttons 20
Main Device Mode 21
Automatic Audio Mode 21
Backlighting 22
Advanced Features 23
A. Punch Through Controls 23
Volume “Punch Through” 23
Channel “Punch Through” 24
Transport “Punch Through” 26
B. Memory Buttons 28
Programming Memory Buttons 30
Erasing Memory Buttons 31
C. Changing the LCD Display 32
D. Programming a Second TV, VCR, etc. to other Device Buttons 33
Warranty and Specifications 35
Glossary 36
Appendix 38
Assignment of Audio/Video Equipment 38
Set Up Code Tables 39
Audio 39
Satellite 42
TV 44
VCR 47
Cable 50
CD 52
DVD 55
AUX 56
1
1
Table of Contents

The Home Theater Master SL-9000 remote control is
preprogrammed to operate over 1,000 Audio and Video
components so that you can set it up by simply punching
in a three digit code number that matches your equipment.
The SL-9000 also has the ability to learn new functions from
your original remote controls, allowing you to customize
the remote to your own needs and update it as you add
new equipment.
Please refer to page 8 - 18 for instructions
on setting up the remote control.
The Home Theater Master SL-9000 remote control operates
up to eight different audio and video devices in your home
entertainment system. They are listed below:
1 TVs, Monitors, Video/LCD Projectors
2 VCRs, TV/VCR combination units
3 Cable boxes, Internet set-tops
4 Satellite receivers - DSS, Primestar, Dish, DBS,
C-Band
5 Audio receivers, Preamplifiers, Surround processors
6 Compact disc players, Multi-Disc changers
7 DVD, Laser disc players, Cassette decks
8 Cassette Tape Players, DAT, MiniDisc, Switchers,
Lighting, Home Control Devices, and Line Doublers
Setting up the remote control to work with your equipment
is simple. The remote control also has many advanced
features that can add ease and enjoyment to the operation
of your home
entertainment system. Please follow the
instructions in this manual, and retain the manual for future
reference.
For any questions or comments about this remote control,
please contact Universal Remote Control, Inc., 271 North
Avenue, New Rochelle, NY 10801, or call [phone].
Service hours are 9:00AM to 6:00 PM EST, Monday- Friday.
2
2
Introduction

This remote control uses four AAA 1.5 V batteries. Please
be sure to match the batteries with the (+) and (–) markings
inside the battery compartment during installation.
A: To Open and Close the Battery
Compartment Cover
1To open the battery cover, push the latch forward toward
the top of the remote control, and lift the latch up.
2To close the battery cover, slide the battery cover straight
back in (toward the top of the remote) and push down
until it “clicks” into place.
B: Low Battery Message
When the Liquid Crystal Display (LCD) flashes L__BAT,
the batteries should be replaced.
Note: Batteries should last about 6 months under normal condi-
tions. The SL-9000 remote control will retain its programmed
memory for up to one year after the batteries are removed and up
to ten years after the batteries go “dead”.
3
3
Battery Installation

A: Function Table Reference
4
4
POWER
MUTEMUTE
T/ V
VOLVOL CHCH
PAUSE
STOP
PLAY
SEL
F
.
F
R
E
W
GUIDE MENU
EXITEXIT
PRE.
CH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTERENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TVTV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROLLEARNING REMOTE CONTROL
AUD CD DVDDVD AUX
CBL
VCR
T VSAT
1
10
12
13
14
15
11
21
23
22
24
16
17
18
19 20
9
234
25 26 27 37
51 52 53 54
38
28 29 30
31 32 33 39
40
35
41 43 44 454241 43 44 4542
46 48 49 5047
34
55
36
5678
Using Your Remote

Function Table
5
5
Using Your Remote
SSAATTFFuunnccttiioonnss
SAT (ON)
On/Off (OFF)
Mute
TV/SAT
Vol Up
Vol Down
Ch. Up
Ch. Down
Up
Down
Right
Left
Select
Guide
Menu
Exit/Cancel
Prev. Ch.
1—0
Enter
Fav
Info/Fetch
Next Prog.
Alt. Audio
Rec.
TTVVFFuunnccttiioonnss
TV (ON)
On/Off (OFF)
Mute
TV/Video
Vol Up
Vol Down
Ch. Up
Ch. Down
Up
Down
Right/Picture
Left/Audio
Select/Enter
Display/Recall
Menu
Exit/Clear
Q. View/Last Ch.
1—0
100/Ch. Scan
Ch. Scan
Sleep
Caption
Ant
Reset
PIP On/Auto Ch.
PIP Swap, Add
PIP Freeze/Delete
PIP Off/Position
TV/CATV
Auto
Add
Delete
AAuuddiiooFFuunnccttiioonnss
AUDIO (ON)
On/Off (OFF)
Mute
Band/FM
Vol Up
Vol Down
Preset +
Preset -
Center +
Center -
Rear +
Rear -
Select/Sub.Bass
Display
Surround
Delay -
Delay+
1—0
Plus 10
Shift
Sleep
Pro. Logic
3 Ch.
Test Tone
Tuner/AM/FM
CD
Tape 1
Tape 2
Phono
VCR1
VCR2
LD/DVD
Aux
TV
NNoo..BBuuttttoonnNNaammee
1-8 Device Name
9 Power
10 Mute
11 T/V Input
12 VOL Up
13 VOL Down
14 CH Up
15 CH Down
16 Up/Pause
17 Down/Stop
18 Right/F.F.
19 Left/Rew
20 Sel/Play
21 Guide/I<<
22 Menu/>>I
23 Exit/Rec
24 Pre. Ch./Eject
25-34 1—0
35 10+
36 Enter/Shift
37 Fav/Sleep
38 Info/Pro. L.
39 Next/3 Ch.
40 Alt/Test
41 Tuner
42 CD
43 Tape 1
44 Tape 2
45 Phono
46 VCR1
47 VCR2/SAT
48 LD/DVD
49 Aux
50 TV
51 M1
52 M2
53 M3
54 M4
55 Light

Function Table
6
6
NNoo..BBuuttttoonnNNaammee
1-8 Device Name
9 Power
10 Mute
11 T/V Input
12 VOL Up
13 VOL Down
14 CH Up
15 CH Down
16 Up/Pause
17 Down/Stop
18 Right/F.F.
19 Left/Rew
20 Sel/Play
21 Guide/I<<
22 Menu/>>I
23 Exit/Rec
24 Pre. Ch./Eject
25-34 1—0
35 10+
36 Enter/Shift
37 Fav/Sleep
38 Info/Pro. L.
39 Next/3 Ch.
40 Alt/Test
41 Tuner
42 CD
43 Tape 1
44 Tape 2
45 Phono
46 VCR1
47 VCR2/SAT
48 LD/DVD
49 Aux
50 TV
51 M1
52 M2
53 M3
54 M4
55 Light
VVCCRRFFuunnccttiioonnss
VCR (ON)
On/Off (OFF)
Mute
VCR/TV
Vol Up
Vol Down
Ch Up
Ch Down
Pause
Stop
Fast Forward
Rewind
Play
F. Adv./Slow<
X2/Intro/Slow>
Record
Eject
1—0
1—100
Enter
Program
Display
C-Counter
Reset
Auto Ch
Add +
Delete -
Tape Speed
VCR Plus
Tracking +
Tracking -
Auto Tracking
Slow -
Slow +
Index
QTR On
QTR Off
Edit
CCaabblleeFFuunnccttiioonnss
CABLE (ON)
On/Off (OFF)
Mute
Switch/A/B
Vol Up
Vol Down
Ch Up
Ch Down
Up/Fine +
Down/Fine -
Right/Fine R
Left/Fine L
Select
Guide/Recall
Menu
Exit
Prev. Ch
1—0
*/Help
Enter/Memory
Fav
Info
PPV/Buy
P/Delete
Page -
Page +
Day -.
Day +
Record
Using Your Remote

Function Table
7
7
CCDDFFuunnccttiioonnss
CD (ON)
On/Off (OFF)
Mute/Fader
Random
Vol Up
Vol Down
Track +/Skip +
Track-/Skip -
Pause
Stop
FF/Search +
REW/Search -
Play
Search -
Search +
Eject/Intro
1—0
Plus 10
Disc
Program
Display
Repeat
Clear
Disc 1
Disc 2
Disc 3
Disc 4
Disc 5
A-B
Time
Intro
Edit
DDVVDDFFuunnccttiioonnss
DVD (ON)
On/Off (OFF)
Skip >>I
Skip I<<
Pause
Stop
F.F.
REW
Play
Set Up
Menu
Clear
Open/Close
1—0
10+
Enter
Return
Display
Sub. On/Off
Audio
Up
Down
Select
Angle
Slow
Left
Right
Subtitle
Repeat
Random
A/B Repeat
T
Title
Memory
AAUUXXFFuunnccttiioonnss
TAPE (ON)
On/Off (OFF)
Mute/Rec Mute
Pause
Stop
F.F.
REW
Play
Deck A
Deck B
Record
Rev. Play
Deck A
Deck B
REW
For. Play
F.F.
Stop
REV. Play
Pause
Record
NNoo..BBuuttttoonnNNaammee
1-8 Device Name
9 Power
10 Mute
11 T/V Input
12 VOL Up
13 VOL Down
14 CH Up
15 CH Down
16 Up/Pause
17 Down/Stop
18 Right/F.F.
19 Left/Rew
20 Sel/Play
21 Guide/I<<
22 Menu/>>I
23 Exit/Rec
24 Pre. Ch./Eject
25-34 1—0
35 10+
36 Enter/Shift
37 Fav/Sleep
38 Info/Pro. L.
39 Next/3 Ch.
40 Alt/Test
41 Tuner
42 CD
43 Tape 1
44 Tape 2
45 Phono
46 VCR1
47 VCR2/SAT
48 LD/DVD
49 Aux
50 TV
51 M1
52 M2
53 M3
54 M4
55 Light
Using Your Remote

B: Preprogrammed Set Up
The Home Theater Master universal remote control can
operate up to eight separate audio and video devices
(equipment). To program the remote control for your
devices, please use the following steps:
Three Digit Code Method
1Turn on the device you would like the remote control to
operate, either manually or with your original remote
control.
2Find the three digit Set-Up Code number for your
device from the tables on pages (39 - 57).
3Press the corresponding Device Button (TV, VCR, SAT,
CBL, AUD, CD, DVD, or AUX) and the MUTE button
on the remote control simultaneously. SET will appear
in the LCD.
8
8
Example: To set up the remote to operate with a SONY
TV, go to the TV Set-Up Code table found on pages (43 -
45) and look for SONY under the Manufacturer/Brand
column. You will find that the Set-Up Code numbers for
SONY TVs are 070, 085, 139 and 147.
POWER
MUTE
T/ V
VOLVOL CHCH
PAUSE
STOP
PLAY
SEL
F
.
F
R
E
W
GUIDE MENU
EXIT
PRE.
CH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
AUD CD DVDDVD AUX
CBL
VCR
T VSAT
POWER
MUTE
T/ V
VOL CH
PAUSE
STOP
PLAY
SEL
F
.
F
R
E
W
GUIDE MENU
EXIT
PRE.
CH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
AUD CD DVD AUX
CBL
VCR
TVSAT
POWER
MUTE
T/ V
VOL CH
PAUSE
STOP
PLAY
SEL
F
.
F
R
E
W
GUIDE MENU
EXIT
PRE.
CH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
AUD CD DVD
DVD
AUX
CBL
VCR
T VSAT
Example: To set-up the remote to operate a TV, press the
TV Device Button and the Mute button, simultaneously.
Device Buttons
Mute Button
Using Your Remote

Note: SET appears in the LCD for 20 seconds to indicate that
the remote control is ready to be programmed. The following
steps must be entered while SET appears in the LCD.
4Point the remote control toward the device that was
turned on in Step 1 and press in the first three-digit Set-
Up Code number for that device using the number buttons
(0-9) on the remote control. SET followed by the number
will appear in the LCD.
Your device will turn off when the correct Set-Up Code
number has been selected. If the device does not turn
off, press in the next Set-Up Code number from the listing.
Continue to select Set-Up Code numbers until your
device turns off, before you proceed to Step 5.
Note: If you have tried all of the three digit Set-Up Code
numbers listed for your device and it still did not turn off, please
proceed to the Auto Search Method on page (10) to
program your remote control.
5Once your device turns off, press the Device Button
selected in Step 3 once again to store the Set-Up Code
number. PASS will flash in the LCD.
6Test the remote control for your device. Try the POWER,
CHANNEL UP AND DOWN, VOLUME UP AND DOWN
buttons, etc. If any of the buttons do not perform as they
should, please repeat the set-up from Step 1 using the
next Set-Up Code number for your device.
Note: Some audio/video devices have separate buttons for
POWER ON and POWER OFF. To operate these devices on
the remote, press the corresponding DEVICE Button to turn the
equipment ON and press the POWER button to turn the
equipment OFF.
7Please repeat the above steps to program the remote
control for each of your other devices.
9
9
Using Your Remote

10
10
Using Your Remote

11
11
Using Your Remote

12
12
Recalling the Set-Up Code Number
To display the three digit Set-Up Code number that was
stored for a device.
1Press the Device Button and the MUTE button, simultane-
ously. SET will appear in the LCD.
2Press the T/V button. The LCD will quickly flash the
three digit Set-Up Code number that was stored for your
device in that mode.
3Please write your Set-Up Code numbers in the chart
below, for future reference.
Set-Up Code Numbers:
Using Your Remote
Audio
SAT
TV
VCR
Cable
CD
DVD
AUX

C: Learning Set Up
The Home Theater Master SL-9000 has the ability to learn
new functions from your original remote controls:
• There are 8 “pages” of learning with each page corresponding
to the 8 Device modes on the remote control: AUDIO, CD,
DVD, AUX, SAT, TV, VCR, CBL.
• All buttons in all Device modes can learn, except the LIGHT
button.
• Learned functions override any existing preprogrammed
functions on the remote control.
• Learned functions are automatically erased when a new
function is learned on the same button.
• Learned functions are retained even after a different three
digit code number is programmed into the remote control.
• To erase a learned function and return to an original
preprogrammed function, please refer to the section
Erasing Learned Functions (page 17).
Learning New Functions on the Main Keypad
1Select the mode in which you wish to learn the new
function by pressing the corresponding Device button.
2Place the SL-9000 and the original remote control to be
learned from, on a flat surface. Line up the remote
controls head to head, about 2 to 3 inches apart.
13
13
Using Your Remote
POWER
MUTEMUTE
T/ V
VOL CH
PAUSEPAUSE
STOPSTOP
PLPLAYAY
SELSEL
F . F
R E W
GUIDE MENU
EXITEXIT
PRE.PRE. CHCH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
AUDAUD CDCD
DVDDVD
AUXAUX
CBLCBL
VCRVCR
TVSATSAT
CHCH
123
456
789
+
-
VOLVOL
+
-
SL-9000 Original remote
2” to 3”

3Press and hold both the Device button selected in Step 1
and the SEL/PLAY button for about three seconds, until
the LCD on the SL-9000 shows LEARN. The SL-9000 is
now in the learning mode.
Note: Each of the following steps must be completed within 20
seconds. If the remote does not receive any new commands with-
in the allotted time, it will return to its normal operating mode.
4Press and release a button on the SL-9000 you have
selected to learn the new function. The LCD will show
READY.
5Press and hold the button on the original remote control
for about 3 seconds from which you are learning the new
function. The LCD on the SL-9000 will show – – – –
indicating that it is receiving the information from the
original remote control.
6Release the button on the original remote control. The
LCD on the SL-9000 will show RETRY.
7Press and hold the same button on the original remote
once again, for about 3 seconds. The LCD on the SL-9000
will flash GOOD, the Device Mode and then return to
LEARN, verifying that the new function has been
learned.
14
14
Using Your Remote
POWER
MUTE
T/ V
VOLVOL CHCH
PAUSEPAUSE
STOPSTOP
PLPLAYAY
SEL
F
.
F
R
E
W
GUIDE MENU
EXIT
PRE.PRE.
CHCH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
AUD CD DVDDVD AUX
CBL
VCR
T VSAT
POWER
MUTE
T/ V
VOL CH
PAUSE
STOP
PL
PL
AY
AY
SEL
F
.
F
R
E
W
GUIDE MENU
EXIT
PRE.
CH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
AUD CD DVD AUX
CBL
VCR
TVSAT
POWER
MUTE
T/ V
VOL CH
PAUSE
STOP
PLAY
SEL
F
.
F
R
E
W
GUIDE MENU
EXIT
PRE.
CH
123
456
789
0
+
10
SLEEP
PRO.L
3.CH
TESTSHIFT
FAV
INFO
NEXT
ALT
ENTER
PIP
TUNER CD TAPE1 TAPE2 PHONO
TV
VCR1 LDP AUXVCR2/SAT
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
AUD CD DVD
DVD
AUX
CBL
VCR
T VSAT
Device Buttons
SEL/PLAY Button

Repeat Steps 4 through 7 for any other buttons you wish to
learn new functions.
8Once you have completed the learning for all the desired
buttons in a Device mode, store the learned functions by
pressing the Device and SEL/PLAY buttons simultane-
ously, once again. The LCD in the SL-9000 will show
SAVED and then return to the Device Mode. The
remote has now returned to the original operating mode.
Once you have stored the learned functions, test the but-
tons that have been taught. If any of the buttons do not
operate as they should, please repeat from Step 1 for those
buttons.
Note: If the LCD shows FAIL at any time during the learning
process, the SL-9000 was unable to learn the new functions.
Please repeat from Step 4. If the SL-9000 continues to
show
FAIL during the learning process, please try the following
suggestions:
* Increase or decrease the head to head distance between the two
remote controls, within a 1 to 5 inch range.
* Increase or decrease the time you press and hold the button on
the original remote control in step 5, for 1 to 2 seconds.
* Avoid fluorescent lights or strong sunlight during the set up.
These lighting conditions can cause interference with the learning
process.
* Verify that the original remote control contains fresh batteries.
Some remote controls operate at non-standard IR, UHF or
ultrasonic frequencies, and are unable to be learned. If you
continue to experience difficulty during set up, please
contact our customer service department for assistance.
15
15
Using Your Remote

Learning New Functions on Device Buttons
The eight Device buttons at the top of the remote control
can also learn new functions. These buttons can only learn
when the SL-9000 remote is in the corresponding Device
mode, e.g. AUDIO, VCR, TV etc.
1Place the SL-9000, and the original remote control to be
learned from, on a flat surface. Line up the remote
controls head-to-head about 2 to 3 inches apart.
2Press the corresponding Device button so the Device name
appears in the LCD. E.g. AUDIO, VCR, TV etc.
3Press and hold the Device button and SEL/PLAY buttons
simultaneously, until LEARN appears in the LCD.
The SL-9000 is now ready to learn.
Note: Each of the following steps must be completed with-
in 20 seconds. If the remote does not receive any com-
mands within this allotted time, it will return to its normal
operating mode.
4Press the Device button selected in Step 2. once again.
READY will appear in the LCD
5Press and hold the button on the original control you
would like to teach into the SL-9000 for about three
seconds. (----) will appear in the LCD.
6Release the button on the original remote. RETRY will
appear in the LCD.
7Press and hold the same button on the original remote,
once again. The LCD on the SL-9000 will flash GOOD,
the DEVICE Mode and then return to LEARN, verifying
that the new function has been learned.
16
16
Using Your Remote

8Press and hold the DEVICE button and the SEL/PLAY
button simultaneously, once again. SAVED will flash
three times in the LCD and return to the DEVICE mode,
indicating that the programming has been stored.
Erasing Learned Functions
To erase learned functions, please refer to the following
procedures:
Erasing Individual Buttons:
1Press the Device button for the mode where the learned
function has been stored.
2Press and hold the Device and the SEL/PLAY buttons
simultaneously, for about 3 seconds, until the LCD
shows LEARN.
3Press and release the button to be erased. The LCD will
show READY.
4Press the LIGHT button. The LCD will flash ERASE,
CLEAR, the Device Mode and then return to LEARN.
Repeat Steps 3 and 4 for any other buttons to be erased.
5To return to the normal operating mode, press the
Device and the SEL/PLAY buttons simultaneously.
The learned functions on the selected buttons have now
been erased. The preprogrammed functions for these
buttons will now operate on the remote control.
17
17
Using Your Remote

Erasing All Buttons in One Device Mode:
1Press the Device button for the mode to be erased.
2Press and hold the Device and SEL/PLAY buttons
simultaneously, for about 3 seconds, until the LCD
shows LEARN.
3Press and hold the Device and LIGHT buttons simulta-
neously for approximately five seconds and then release
the buttons. The LCD will flash ERASE and then alter-
nately CLEAR and the Device Mode.
Note: When the LCD on the remote returns to the Device
Mode, all the learned functions in the selected Device mode have
been erased. All the buttons in that Device mode will now oper-
ate with the preprogrammed functions in that mode.
Erasing All Buttons in All Device Modes
1Press and hold the TV Device Button and the LIGHT
button simultaneously, for approximately ten seconds.
The LCD will flash ERASE ten times, flash CLEAR
and then return to the TV mode.
When the LCD on the remote returns to TV, all the
learned functions in all eight Device modes have been
erased. All the buttons in all Device modes will now oper-
ate with the preprogrammed functions in their respective
modes.
18
18
Using Your Remote

D: Operation
After you have programmed the remote control for your
equipment, use the following procedures to operate your
home entertainment system:
1Press the Device Button that you wish to operate: e.g. to
operate a TV, press the TV Device Button; to operate a
VCR, press the VCR Device Button, etc.
2Aim the remote control at the device and press the
POWER button to turn on the device.
3Press the buttons that send out the commands you
desire.
Note: Some audio/video devices have separate buttons for
POWER ON and POWER OFF. To operate these devices on
the remote, press the corresponding DEVICE Button to turn the
equipment ON and press the POWER button to turn the
equipment OFF.
Please try all the functions of this remote control with your
equipment. The most common functions are labeled on the
remote. However, some of the secondary functions might
be stored under a button that has a different name from the
one on your original remote control. Please refer to the
Function Tables on pages (5 - 7) for details.
19
19
Using Your Remote