4
You will perform two steps - “ACTIVATION” and “PAIRING”. ACTIVATION sets the Universal
Car Remote to function like the original remote for your vehicle. PAIRING sets the Universal
Car Remote to work with your vehicle. A video is available at www.UniversalCarRemote.com
with more details on how to do the PAIRING process.
It is important to follow these steps in order to successfully complete setup. If you skip a step,
the Universal Car Remote will not work properly, and you’ll have to repeat the setup process.
Before you begin, go to the VEHICLE LOOK UP list on pages 15-25. Write down both your
ACTIVATION and PAIRING codes for your vehicle’s make, model and year. Some vehicles
have two ACTIVATION CODES7U\WKH¿UVWFRGHDQGLI\RXDUHXQVXFFHVVIXOZLWKPAIRING
the Universal Car Remote to your vehicle, try the second.
ACTIVATION CODE PAIRING CODE
STEP 1 (of 2)
Activating your Universal Car Remote
Before you begin, it is highly recommended you read through all the instructions to familiarize
yourself with the procedure.
1. Press the FUNCTION I and PANIC buttons at the same time and release. The
STATUS LIGHT will illuminate steady indicating you have entered “ACTIVATION
MODE”.
2. Within 15 seconds, enter the three digit ACTIVATION CODE using the Universal Car
Remote’s LOCKEXWWRQIRUWKH¿UVWGLJLWUNLOCK button for the second digit, and
TRUNK button for the third digit. For example, if your ACTIVATION CODE is 512,
you’ll press the LOCK button 5times, the UNLOCK button 1time, and the TRUNK
Let’s get started
NOTE: Some vehicles require holding the TRUNK, PANIC, and/or FUNCTION BUTTONS
for up to 3 seconds before the feature operates, while some vehicles require these buttons to
be pressed twice before the feature operates.
