Unox XEBPC-08EU-B Service manual

2
PROVERS

4
PROVERS
Safety regulations
SAFETY REGULATIONS FOR INSTALLATION AND
MAINTENANCE
- Read this guide carefully before installing or maintain-
ing the appliance, and conserve this guide with care for
any future consultation of users.
- All installation, assembly and non-routine maintenance
operation must be performed exclusively by qualified
technicians that are authorized by UNOX, in compli-
ance with the regulations in force in the user country,
with respect to the regulations on systems and work
safety.
- Before starting installation or maintenance disconnect
the appliance from any electrical or plumbing connec-
tions.
- Check that systems are compliant to the installation
country standards and to the specifications indicated
on the appliance rating plate before installing the ap-
pliance.
- Interventions, alterations or modifications not express-
ly authorised that do not comply with the indications in
this manual shall invalidate the guarantee*.
- Installation or maintenance that fails to respect the in-
dications in this manual may cause damage, injury or
fatal accidents.
- Persons not involved with appliance installation may
not pass through or occupy the work area during appli-
ance assembly.
- If the equipment is installed on mobile bases or stacked
in columns, be sure to use only UNOX components and
respect the instructions on their packaging.
*Please visit the Warranty section of the Unox Web site (www.unox.com) for further details

5
ITEN
- Given its potential danger, the packaging material must
be kept out of reach of children and animals, and cor-
rectly disposed of in compliance with local regulations.
- The ratings plate provides essential technical infor-
mation that is of utmost importance for any appliance
maintenance or repairs. Do not remove, damage or
modify the plate.
- Failure to follow these instructions can cause damage
and injury or death, voids the warranty and exempts
UNOX from any liability.
SAFETY REGULATIONS FOR USE
- Following procedures other than those indicated in this
guide to use and clean the appliances is considered in-
appropriate and may cause damage, injury or fatal acci-
dents; in addition to invalidating the guarantee* and re-
lieving UNOX of all liability.
- This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction con-
cerning use of the appliance in a safe way and understand
the hazard involved. Children shall not play with the ap-
pliance. Cleaning and user maintenance shall not be made
by children without supervision.
- This appliance can only be used for cooking food by
qualified personnel in industrial and professional kitch-
ens upon completion of scheduled training courses; all
other uses are not compliant to the scope of use and
therefore hazardous.
- Children must be supervised to ensure they do not play
with the appliance.
- This appliance can be used exclusively:

6
- by qualified personnel that attend scheduled training
courses;
- in combination with:
- all BAKERTOP™/CHEFTOP MIND.Maps™ combined
ovens excluding big\wheeled ovens
- for leavening baked goods.
- Monitor the appliance during its entire operation cycle.
- If the appliance does not function or if there are any
functional or structural alterations, disconnect the
electricity and water supplies and contact a UNOX au-
thorized customer assistance service. Do not attempt
to independently repair the appliance. Request UNOX
original spare parts for any repairs necessary.
- It is best to have an authorized customer assistance
service perform maintenance and inspection on the ap-
pliance at least once a year to ensure top working and
safety conditions.
- Maximum tray weight allowed is 5 Kg: heavier loads
damage the lateral metal guides and trays.

20
- The cable must have a maximum
cross-section of 10 mm2 (pur-
suant standard CEI EN 60335-
2-42:2003-09) and be of yel-
low-green colour.
- Must be grounded to the
earthing (green-yellow wire).
- Must be connected to a ther-
mal differential switch in compli-
ance with the regulations in force
(0.03A Type A).
- Must be connected to a omni po-
lar circuit breaker mechanism that
enables complete disconnection in
categoryIIIovervoltageconditions.
Checks
- The copper jumper inthe termi-
nal board and the electrical cable
must be secured together beneath
the screw in its tightening direc-
tion; and the electrical connections
must be well secured before con-
necting the appliance to the elec-
tricity mains.
- Check for any electrical disper-
sion between the phases and the
ground, and for electrical conti-
nuity between the external casing
and the main ground line.
- Check that the power supply volt-
age does not deviate from the
nominal voltage value specified
on the appliance rating plate when
the appliance is operating. If this
is not the case, wire the phases as
specified on the "technical specifi-
cations" sheet attached.