3 / 5
2) Go to www.urbit.us and click the “Log In” button on the right corner
3) Fill in your email and password
4) Once you login Click the “Add gateway+” button and fill in the serial number (located at the
back of your gateway) and select a name (to identify the gateway).
5) To add additional gateways, Select Add Gateway + > Fill in name and serial Number
STEP 3: Configure your Gateway via Urbit Management Center (UMC) or UrbitAPP (Android only)
Your Urb-IoT Cellular and Satellite networks are available since it is off shelf-mode, in case you have a Wi-
Fi network available, you need to configure it
NOTE: Every command you send will be delivered next time the Gateway connects to the cloud (Factory
setting = 1h) next reporting interval is shown in the UMC
1) Urbit Management Center:
a. Login to Urbit Management Center urbit.us, your account username and password created
on the Step 2
b. You should see your Urb-IoT on the section Devices or Map or Add gateway +
c. Click on the icon to see gateway information, QR code and change device name
d. To Change reporting interval:
i. Select your Urb-IoT > Send Command (top menu) > Set Gateway Reporting
interval > Send > Define reporting Interval and click “Submit”
e. To Connect your Urb-IoT to a Wi-Fi network (if available):
i. Select your Urb-IoT > Send Command (top menu) > Set Gateway Wi-Fi parameters
> Send > Fill in SSID and Password, Wi-Fi Mode = Client and Access point = 1
f. To change LoRaWAN region
i. Select your Urb-IoT > Send Command (top menu) > Firmware upgrade > Select
frequency from the drop-down menu < Send
g. If connected to a power source “Charging battery” must say “Yes”
h. To add a sensor, go to STEP 4 and follow the instructions, you must register the sensor in TTS
before sending the command “Add LoRaWAN Sensor” in the Urbit Management Center
2) Via UrbitApp for local configuration without connectivity:
a. Download the App (only Android) before going to field: Play Store > Search < Urb-IoT
b. Create a new account
c. Approve BLE, Camera and Location permissions
d. Be sure the BLE on the Urb-IoT is ON (it is ON only when your Urb-IoT is connected to a power
supply - green LED)
e. Register on the App > Click the “+” button on “My Gateways” > Read the QR Code > Your
Password is the ID number of your Urb-IoT
f. Device Dashboard is shown when gateway is connected
g. Menu > Advance User > Password: urbitddmmaa.$# (Using phone’s date in the format the
format: dd = day mm = month aa = year)
h. In case you want to change factory radios configuration:
i. Verify you are connected to the Gateway Menu > Enable Interfaces > Edit values
> Send Changes
ii. Confirmation is received after the command is executed successfully
STEP 4: Add LoRa sensors
1) Register sensor in TTS before adding any LoRa sensor in the Urbit Management Center
a. Create an account or log in at TTS (https://www.thethingsnetwork.org/)
