UROVO Scope Link DT50 User manual

BY UROVO PRODUCT 1 Ver. B
USER GUIDE
DT50 User Guide
Android 9.0

BY UROVO PRODUCT 2 Ver. B
Note:
* This Guide introduced general functions of DT50. Your PDA device may
have different functions wherein or description.
* There may be differences between the illustrations in this Guide and the
actual product. And the actual product shall prevail.
© All rights reserved Shenzhen Urovo Technology Co., Ltd. 2019.

BY UROVO PRODUCT 3 Ver. B
Terms of usage
Statement
This Guide includes proprietary information of Shenzhen Urovo Technology Co., Ltd.
Its purpose is to help users better operate, use and maintain the device described
herein only. Without written permit of Urovo, the proprietary information in the text
shall not be copied or disclosed to any other party.
Product improvement
Urovo will keep improving its products but give no further notice in case of any
change in the specification or design.
Disclaimer
All the user guides and specifications published by Urovo are correct. In the event of
any wrong information, Urovo shall reserve the right to correct such errors but waive
rights of liability and claim.
Urovo shall not be liable for personal and property safety of users in the following
cases:
User fails to use the battery in the correct way set out in this Guide;
User or any third party delegated fails to transport or store the battery in the
correct way specified in this Guide;
The battery used by the user is not purchased from any official channel of Urovo;
History of preparation
Modification records are as follows:
Prepared by
Date
Description
DT50-UGV01 Rev A
October 2019
First edition
DT50-UGV01 Rev B
February 2020
Second edition

BY UROVO PRODUCT 4 Ver. B
Table of Contents
About the Guide ................................................................................................. 6
Chapter I Getting Started .................................................................................... 8
Introduction........................................................................................... 8
Unpacking ............................................................................................ 8
Installation Guide ................................................................................ 10
Caution on Battery Charging ................................................................ 12
Charging Method................................................................................. 13
Access Device Settings ....................................................................... 14
Data Usage ........................................................................................ 15
Key Mapping....................................................................................... 16
Display ............................................................................................... 21
Screen Brightness Settings .................................................................. 21
Screen Rotation Settings ..................................................................... 22
Screen Wallpaper Settings ................................................................... 22
Sleep Settings..................................................................................... 23
Font Settings ...................................................................................... 23
Sound Settings ................................................................................... 24
Storage .............................................................................................. 25
Battery Management ........................................................................... 27
Battery Optimization ............................................................................ 27
Date and Time Settings ....................................................................... 27
About Device ...................................................................................... 28
Upgrading........................................................................................... 29
Chapter II How to Use....................................................................................... 30
Introduction......................................................................................... 30
Home Screen...................................................................................... 30
Status Bar .......................................................................................... 30
Quick Access Panel............................................................................. 31
Usage of Touchscreen......................................................................... 31

BY UROVO PRODUCT 5 Ver. B
Keyboard Input ................................................................................... 32
App Profile.......................................................................................... 33
Task Manager..................................................................................... 35
Restart ............................................................................................... 36
Power-off............................................................................................ 36
Restore Device ................................................................................... 37
Description of Computer Connected Operation ...................................... 38
Disconnection from PC ........................................................................ 43
Chapter III Data Capture ................................................................................... 45
Introduction......................................................................................... 45
Scan Settings ..................................................................................... 45
Chapter IV Wireless.......................................................................................... 61
WLAN ................................................................................................ 61
WWAN............................................................................................... 63
Bluetooth............................................................................................ 64
Chapter V Accessories ..................................................................................... 67
Introduction......................................................................................... 67
List of Standard Accessories ................................................................ 67
选配件列表 List of Optional Parts .......................................................... 68
Chapter VI Maintenance and Troubleshooting..................................................... 70
Introduction......................................................................................... 70
Maintenance....................................................................................... 70
Troubleshooting .................................................................................. 71

BY UROVO PRODUCT 6 Ver. B
About the Guide
Introduction
This Guide offers information on usage of DT50 mobile computer and its accessories.
Note: The screens and windows described in this Guide are samples, which can differ from actual ones.
Software version
To determine the software version of the current device, please touch Settings -
System-About Device.
Android Version——display operating system version
Version No.——display software build version number.
Chapter description
This Guide covers the following topics:
Getting Started offers information on putting DT50 into operation for the first time.
How to use is an operation instruction on DT50.
Applicationsdescribes usage of built-in apps.
Data Capture describes acquisition of bar code information by scanning.
Wireless describes different wireless data communication methods.
Accessories describes information on standard and optional parts.
Sign convention
The following convention applies in the text:
Bold:
Emphasis
Title
Dialog box, window, part name, and screen icon
Keyword
Button name
(●):
Operational option
Order list
Step list needed, which may not be continuous

BY UROVO PRODUCT 7 Ver. B
(√):
Functional option
Italic:
Marked emphasis
Relevant Document
Quick Start Guide for DT50 Handheld Intelligent Terminal
DT50 Brochure
DT50 Specification
For the latest edition of this Guide and all the other guides, please visit:
https://en.urovo.com/page/aftersalesservice.html
Service information
You can visit the official website (enurovo.com) of Urovo Technology Co., Ltd.
(hereinafter referred to as Urovo) whenever possible to gain quick network support
services:
Click the search box and enter corresponding product model to query the machine's
configuration information. Click maintenance query to query information of the
nearest service center or enter the serial number (SN) of your device in the search
box for maintenance progress to query the maintenance state to follow up the state
of the device in maintenance in time! Service hotline: 400-888-6989
Please offer the following information while contacting the Support Center:
Device SN (Serial Number)
Model or product name
Software type and version number.: check the device-Settings-System-About
Device
Thanks for your cooperation!
Provision of document feedback
If you have any comment, question or advice on this Guide, please e-mail to

BY UROVO PRODUCT 8 Ver. B
Chapter I Getting Started
Introduction
This chapter describes product information and instruction of device for the first time.
Unpacking
1. Please carefully remove all the protective materials around DT50 and keep
the device case for storing and transporting the device in the future
2. Please check the following elements:
DT50 intelligent terminal×1
Adapter×1
USB cable×1
Quick start guide×1
3. Inspect the device for damage. If any equipment is damaged or missing,
please contact the customer service support or local distributor.
4. Please remove the screen shipping protective film before using.
Front side
Figure 1-1 Front View

BY UROVO PRODUCT 9 Ver. B
Side
Figure 1-2 Bottom View Figure 1-3 Top View
Figure 14- DT50 Left & Right-Side Views

BY UROVO PRODUCT 10 Ver. B
Back
Figure 1-5 DT50 Back View
Installation Guide
The SIM card slot is in the battery holder.
Figure 1-6 DT50 Card Slot
Instruction on SIM/TF Card installation
⽤⼿将后壳左侧 SIM 卡/TF 卡卡托取出,将 SIM 卡1、SIM 卡2及TF 卡正确放置卡槽
上;

BY UROVO PRODUCT 11 Ver. B
Take out the SIM/TF Card holder on the left of shell and correctly put SIM Card 1,
SIM Card 2 and TF Card in the card slot;
Note:
1. Both SIM Card 1 and SIM Card 2 are Nano SIM Cards;
2. The preferred network is provided by SIM Card 1:
1) Card 1 and Card 2 are carried by China Mobile/China Unicom/China Telecom.
If the VOLTE HD voice call function is enabled for China Telecom 4G cards, both
cards will be available for 4G network in display; otherwise, the China Telecom
card will be the additional card available for the 2G network in display;
2) Given that both Card 1 and Card 2 are carried by China Telecom, if the
VOLTE HD voice call function is enabled for China Telecom 4G cards, the
carrier of Card 1/Card 2 will be shown as China Telecom; otherwise, the master
card will be available for 4G network while the additional card will have null
signal in display.
Instruction of battery
While installing the battery, please note the direction of installing the battery. Load
the front end of the battery in the device's battery slot and push the bottom of the
battery into the device. Please do not push the battery into the device with force. The
installed battery in the battery holder should be flat and secure. The installation
method is as shown in Figure 7
Figure 1-7 Battery Installation
After installing the battery cover, turn the battery cover fastener right to the
lock position.
Instruction of battery replacement
1. Long press the power key and a dialog box will pop up;
2. Select power-off;
3. Upon power-off, turn the battery cover fastener left and remove the battery cover;
4. Lift the battery from its tail end to remove and replace the battery with a new one.

BY UROVO PRODUCT 12 Ver. B
Instruction on TF Card replacement
1. Long press the power key and a dialog box will pop up;
2. Select power-off;
3. Upon power-off, turn the battery cover fastener left and remove the battery cover;
4. Lift the battery from its tail end to remove the battery;
5. Manually pull out the SIM/TF Card holder in the left of the shell to remove the TF
Card;
6. Push a new TF Card into the holder to replace the former one. A slight click will
indicate that the installation is completed.
Instruction on SIM Card replacement
1. Long press the power key and a dialog box will pop up;
2. Select power-off;
3. Upon power-off, turn the battery cover fastener left and remove the battery cover;
4. Lift the battery from its tail end to remove the battery;
5. Manually pull out the SIM/TF Card holder in the left of the shell to remove the
SIM Card;
6. Push a new SIM Card into the holder to replace the former one. A slight click will
indicate that the installation is completed.
Caution on Battery Charging
1. Please do not use or charge the device in any environment with too high or low
temperature;
2. Please charge the battery by the product's charger in standard configuration or
desktop charger only;
3. If the device (including the battery) is not used for the moment, please separately
store the battery and device and pack them in PE bags or other insulated bags in the
original package in case that they become damp or contact with other electronic
devices. Do not store the unpacked battery in a stack;
4. Please do not idle the device for over 3 months; be sure to charge and discharge
the battery not used for the moment once per 3 months, where the stored battery
should be 60%~70% charged (i.e., 3.8V~3.9V);
5. The lithium battery should be stored somewhere cool, dry and ventilated. It is
advised to be stored in a 0~28℃environment.

BY UROVO PRODUCT 13 Ver. B
Charging Method
Charge by USB
For TYPE-C USB cable, link one end to computer and the other to device. In
charging, the device's charge indicator is red, which will turn green when the device
is fully charged.
Figure 1-8 TYPE-C USB Cable
Charge by desktop charger
A desktop charger can charge the device (including the battery) and a battery at the
same time.
Figure 1-9 Power Adapter to Desktop Charger
1. Connect the DC interface of the base to the power adapter.
2. Load the front end of the battery into the battery slot and push the bottom of the
battery into the battery slot to complete battery installation. When the battery is
correctly installed, the charge indicator will turn red. When the battery is fully charged,
the indicator will turn green.
3. Put the back of the device body in the body slot of the base and fasten left and
right fasteners to complete installation of the body. And in this case, the body's
charge indicator will turn red.

BY UROVO PRODUCT 14 Ver. B
Figure 1-10 Charging Charge Completed
Access Device Settings
Method 1
Open the quick access panel and touch the settings icon;

BY UROVO PRODUCT 15 Ver. B
Figure 1-14 Quick Access Panel
Method 2
In the home screen, pull up the screen and touch the settings icon;
Figure 1-15 Enter Settings Interface from home screen
Data Usage

BY UROVO PRODUCT 16 Ver. B
Touch to open the data usage page, where the user may set whether to use data. If
yes, drag up or down to set the upper limit and alert value of mobile data or touch
and click to set the accurate value of mobile data.
Figure 1-16 Data Usage
Key Mapping
Key mapping applies to all the physical keys except the power key. Each mapped
key can be granted with a new key value.
Steps for key mapping:
1. Open Settings-System-Key Mapping and check -Allow Key Mapping;

BY UROVO PRODUCT 17 Ver. B
Figure 1-17 Key Mapping
2. Touch Mapping Function;
Figure 1-18 Mapping Function Enabled
3. Press the physical key for key mapping, the key value and name will be shown;

BY UROVO PRODUCT 18 Ver. B
Figure 1-19 Mapping Function
4. Tap Mapping Function-Replace by a New Key, Enable an App and Send a
Broadcast.
Figure 1-20 Mapped Key Value
5. Tap Mapping Key-Enable Key Mapping.
6. View the mapped key list in the key mapping page to manage mapped keys.

BY UROVO PRODUCT 19 Ver. B
Figure 1-21 Mapped Key List
a) Slide a certain option in the list to the left to reset the key to the default
settings and clear the key's mapping value;

BY UROVO PRODUCT 20 Ver. B
Figure 1-22 Key Mapping Deleting
b) Touch the menu key or settings icon at the top right corner to reset the
value of each mapped key and restore the default value of each physical key.
Other manuals for Scope Link DT50
2
This manual suits for next models
1
Table of contents
Other UROVO Touch Terminal manuals