US Robotics usr5465 User manual

Wireless MAX g Router
Quick Installation Guide
Guide d'installation rapide
Installationsanleitung
Guida per l'installazione rapida
Guía breve de instalación
Beknopteinstallatiegids
HõzlõKurulum Kõlavuzu
Οδηγός γρήγορης εγκατάστασης
Pokyny k instalaci naleznete v uživatelské prírucce na instalacním disku CD-ROM.
A telepítési utasításokat lásd a telepíto CD-ROM Felhasználói kézikönyvében.
Instrukcja instalacji jest dostepna w podreczniku uzytkownika na dysku instalacyjnym CD-ROM.
Installationsanvisningar finns i användarhandboken på installationsskivan.
R24.0725.00
rev 1.3 8/07

Contents
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installation ............................................................................1
Additional Configuration ......................................................... 6
Troubleshooting .................................................................... 10
Additional Information ...........................................................12
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installation ..........................................................................13
Configuration supplémentaire .................................................18
Dépannage .......................................................................... 22
Informations complémentaires ............................................... 24
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installation ......................................................................... 27
Weitere Konfiguration ........................................................... 32
Fehlerbehebung ................................................................... 37
Weitere Informationen .......................................................... 39
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Installazione ........................................................................41
Configurazione aggiuntiva ..................................................... 46
Risoluzione di problemi ........................................................ 50
Informazioni aggiuntive ........................................................ 52
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Instalación .......................................................................... 53
Configuración adicional ........................................................ 58
Solución de problemas.......................................................... 63
Información adicional ........................................................... 65
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Installatie ........................................................................... 67
Aanvullende configuratiegegevens ......................................... 72
Problemen oplossen ............................................................. 76
Aanvullende informatie ......................................................... 79
Türkçe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Kurulum ...............................................................................81
Ek Konfigürasyon ................................................................. 86
Sorun Giderme ..................................................................... 90
Ek Bilgiler ........................................................................... 92
Ελληνικά . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Εγκατάσταση . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Πρόσθετη διαμόρφωση . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Αντιμετώπιση προβλημάτων. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Πρόσθετες πληροφορίες . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Support / Assistance / Servizio assistenza / Asistencia téc-
nica / Ondersteuning / Destek / Υποστήριξη . . . . . . . . 105

Cesky
Pokyny k instalaci naleznete v uživatelské prírucce na instalacním disku CD-ROM.
Magyarország
A telepítési utasításokat lásd a telepíto CD-ROM Felhasználói kézikönyvében.
Polska
Instrukcja instalacji jest dostepna w podreczniku uzytkownika na dysku instalacyjnym CD-ROM.
Svenska
Installationsanvisningar finns i användarhandboken på installationsskivan.

English
1
English
Installation
Package Contents
Physical Features
Front
!USRobotics Wireless MAXg Router !Detachable Antenna
!9V DC Power Supply !Installation CD-ROM
!Ethernet cable !Quick Installation Guide
Symbol Name State Condition
Power
Off Not receiving power.
Solid Receiving power.
WLAN
(Wireless Net-
work)
Off Wireless connection is disabled.
Solid Wireless connection is enabled.
Flashing Sending and receiving data.
WAN
(Internet)
Off No Internet connection established.
Flashing Sending and receiving data.
Solid Internet connection is established.
LAN
(1 to 4)
Off No LAN connection.
Solid LAN link is achieved.
Flashing Sending and receiving data.
Printer Off No printer connection is detected.
Solid Printer connection is detected.
Flashing Sending data to printer.

2
English
Back
System Requirements
!A computer with an Ethernet adapter installed
!An Ethernet-based Cable or DSL modem
!Safari users: Safari 1.2 or later
All other users: An HTML 4.01-compliant Web browser with JavaScript ena-
bled
Item Function
WAN
Connects your router to your Cable modem, DSL
modem or your network.
LAN 1 to 4
Connects additional devices to your router.
USB
Connects your router to a USB printer.
Reset
Reboots your router or restores your router to the fac-
tory default settings.
• To reboot your router without changing your current
settings, press and hold the Reset button for 1 second.
• To restore your router to the factory default settings,
press and hold the Reset button for at least 7 seconds
9VDC
Connects the power adapter to your router.
Connects an antenna to the router.
WAN 1234
9VDC
Reset
USB

English
3
Installation Instructions
Step One: Connect Your Router
1. Connect your DSL or Cable modem to the router:
A. Power off your computer and your DSL or Cable modem.
B. Connect the provided antenna to the back of the router.
C. Do one of the following:
If your modem connects to your computer with an Ethernet cable:
Locate the Ethernet cable that connects your DSL or Cable modem to
your computer’s Ethernet adapter, and disconnect it from your computer
only: do not disconnect the cable from your DSL or Cable modem.
If your modem connects to your computer with a USB cable: Dis-
connect the USB cable from both the modem and your computer. You
will need another Ethernet cable in addition to the one provided with the
Wireless MAXg Router. Connect one end of the Ethernet cable to the
Ethernet port on the back of your DSL or Cable modem.
D. Connect the free end of the Ethernet cable to the WAN port on the rear
of the router.
Note:The USB port on the router is for connecting a USB printer only.
Do not connect your modem to the USB port on the router. For
instructions on connecting a USB printer to your router, see
“Install a USB Printer” on page 7.
WAN
1234
9VDC
Reset
USB
WAN
1234
9VDC
Reset
USB
WAN
1234
9VDC
Reset
USB

4
English
2. Connect the router to your computer and wired network devices:
A. Connect one end of the supplied Ethernet cable to your computer’s
Ethernet port.
B. Connect the other end to one of the router’s LAN ports
3. Power up the network:
A. Turn on your modem. Wait until the modem LEDs stabilize before pow-
ering up your router.
B. Connect the supplied power adapter to the power port on the router.
C. Plug the power adapter into a standard power outlet.
D. Turn on your computer.
Step Two: Configure the Basic Connection Settings
1. Start your Web browser.
2. In the location or address line, type http://192.168.2.1 and press
ENTER to access the router configuration pages.
3. Click Start. The Setup Wizard leads you through the basic router configura-
tion process.
Note:This product is intended to be supplied by a Listed Direct Plug-in
Power Unit marked Class 2 and rated 9VDC, 1200 mA.
Note:The router's default IP address is http://192.168.2.1.
Note:If you see a “Page Not Found” error at any time while using the
router configuration pages, press the Back button in your web
browser or refresh the page.
WAN
1234
9VDC
Reset
USB
WAN
1234
9VDC
Reset
USB

English
5
The Setup Wizard will attempt to automatically detect your Internet connec-
tion. If your connection cannot be automatically detected, you can manually
enter your connection information. If you are unsure about any required con-
nection information, contact your Internet Service Provider (ISP).
4. After the initial configuration, the router will reboot and you will be directed
to the Status page.
For expanded Setup Wizard details, see the User Guide on the USRobotics Instal-
lation CD-ROM.
Point-to-Point Tunneling (PPTP) Users:
If your ISP uses a PPTP connection, you will need to perform the following
additional steps to complete your Installation procedure and create an Inter-
net connection. If you have any questions regarding any of your PPTP con-
nection settings, contact your ISP.
1. In the router configuration pages, click the Internet tab and scroll down
to the Point-to-Point Tunneling (PPTP) section.
2. Select the My ISP uses a PPTP connection checkbox.
3. Enter your Domain or IP address of your PPTP server in the Domain
field, and the User name and Password from your ISP. If your ISP uses
a specific authentication method, either select or deselect the appropriate
checkboxes.
4. When you are finished, click Save. The router will restart and you should
then have an Internet connection. You can go to the Status page to view
your connection information.
Back Up Your Configuration Settings
Having a backup reduces the effort required in reapplying your configuration set-
tings should you ever restore your router to its factory default settings. USRobot-
ics recommends that you back up your settings now.
1. In the router configuration pages, click the Device tab and scroll down to
Back Up Settings.
2. Click Back Up.
3. Your system will prompt you to save or open the file. Select Save.
Congratulations. You have successfully completed the installation proce-
dure. You can verify your Internet connection by registering your Wireless
MAXg Router at
www.usr.com/productreg/ .

6
English
Additional Configuration
Connect Wireless Devices
Wi-Fi Protected Setup™ Devices
See your wireless device’s documentation to determine if it can connect to the
Wireless MAXg Router using Wi-Fi Protected Setup (WPS). WPS devices use a
push button or PIN to connect to the network. See your wireless device’s docu-
mentation to determine which method you should use to connect to the router,
and how to locate the push button or PIN for the device.
If you are using a Wireless MAXg Adapter that is enabled with WPS, see the
wireless adapter’s documentation for instructions on starting WPS on the
adapter.
1. Be ready to start WPS on your device.
2. Start your Web browser.
3. In the location or address line, type http://192.168.2.1 and press
ENTER to access the router configuration pages. Enter the user name and
password for the router when prompted.
4. On the Status page, click Add wireless device.
5. Do one of the following:
"To connect a WPS device using a push button, click Find Device, then
push the WPS button on the device.
"To connect a WPS device using a PIN, enter the device's PIN and click
Add Device, then start WPS on the device.
The wireless device detects the wireless security settings of the router and
creates a secure wireless connection to the network.
All Other Devices
1. Ensure that each wireless adapter that will be connected to the network is set
to infrastructure mode. For instruction in changing your adapter’s wireless
mode, see your wireless adapter’s documentation.
2. Set the Network name or SSID in the wireless adapter’s settings to the Net-
work name that is used in the router.
3. Make sure that the wireless security settings for the wireless adapter match
those that you set on the router. For instruction in changing your adapter’s
wireless security settings, see your wireless adapter’s documentation.

English
7
Install a USB Printer
A USB printer can be connected to the Wireless MAXg Router and used as a
network printer if both your operating system and your printer support the Inter-
net Printing Protocol (IPP).
The following operating systems have built-in support for this function:
!Windows Server®2003
!Windows Vista™, Windows®XP and 2000
!Mac OS X
!Linux distributions supporting CUPS
Contact your printer manufacturer to determine if your printer supports IPP.
For instructions on printer installation for Windows Me and 98SE, Mac, and
Linux, see the User Guide on the USRobotics Installation CD-ROM.
Step One: Local Printer Installation
Before connecting your printer to the print server, it is important to install the
drivers provided by the printer manufacturer on each computer that will use the
printer.
1. Plug your USB printer into one of the USB ports on the computer.
2. Install the printer by following the installation instructions included with your
printer.
3. Print a test page to ensure that the printer is working properly.
4. Power off the printer.
Note:When used with multi-function printers that scan and copy, the
Wireless MAXg Router only supports printing. For bi-directional
communication features such as scanning, connect the multi-function
printer directly to the computer. Also, notifications, such as low ink or
add paper, will not be transmitted from the Wireless MAXg Router to
your computer.
Note:If the printer has already been installed on every computer that will use
it once it is on the network, skip to “Step Two: Get Your Print Server
Information”.

8
English
Step Two: Get Your Print Server Information
1. Disconnect the printer from your computer and plug the thin rectangular end
of the USB cable into the USB port on the Wireless MAXg Router.
2. Turn your printer on.
3. On your computer, start a Web browser.
4. In the location or address line type http://192.168.2.1 and press
ENTER to access the router configuration pages.
5. Enter the user name and the password for your router and click OK.
6. On the Status page, look for the Printer status and Printer location infor-
mation in the Device section.
7. Write down the Printer location address. You need the address to set up the
printer on computers that are connected to your network that you want to
have access to the printer.
Step Three: Connect Computers to the Wireless USB Print Server
Windows Vista
1. Click Windows Start > Control Panel > Hardware and Sound > Printers.
2. Click Add a Printer.
3. Choose the radio button labeled Add a network, wireless or Bluetooth
printer. Click Next.
4. Click The Printer That I Want Isn’t Listed.
5. Choose Select a shared printer by name, and in the URL field, enter the
printer location address recorded during Step Two. Click Next.
6. If prompted, select the manufacturer and model of your printer and follow
the on-screen instructions.
7. Enter a name for the printer and click Next. You can choose to print a test
page to verify the printer's connectivity.
Note:You must perform this procedure on each computer on your network
to allow printing using the print server on the Wireless MAXg Router.
Note:The URL information is case-sensitive and must be entered exactly as
it is listed on the Printer Location section on the router's Status
page. If you have modified the IP address of your router, then use
your router's IP address in place of http://192.168.2.1.
WAN 1234
15VDC
Reset
USB

English
9
8. Click Finish to complete the setup process.
Windows XP and 2000
1. Do one of the following:
"Windows XP: Click Windows Start >Printers and Faxes.
"Windows 2000: Click Windows Start > Settings > Printers.
2. Click Add a Printer.
3. The Add Printer Wizard will start. Click Next.
4. Choose the radio button labeled A network printer, or a printer attached
to another computer. Click Next.
5. Select Connect to a printer on the Internet or on a home or office net-
work. In the URL field, enter the Printer location address you copied from
the router configuration pages. Click Next.
6. Select the manufacturer and model of your printer. Click OK.
7. When prompted, select Yes to set this printer as your default printer. If
prompted, you can choose to print a test page.
8. Click Finish.
Step Four: Verify the Printer's Connectivity
If you did not print a test page in the previous step, print one now to verify that
the printer is connected correctly to the network.
1. Do one of the following:
"Windows Vista: Click Windows Start > Control Panel > Hardware
and Sound > Printers.
"Windows XP: Click Windows Start >Printers and Faxes.
"Windows 2000: Click Windows Start > Settings > Printers.
2. Right-click on your printer and select Properties.
3. Click Print Test Page. The test page should print successfully.
Note:The URL information is case-sensitive and must be entered exactly as
it is listed on the Printer location section on the router's Status page.
Note:If your printer is not in the list, your printer drivers were not installed
correctly. Repeat ““Step One: Local Printer Installation” on page 7.
Note:If the test page fails to print, refer to “Troubleshooting” in the User
Guide on the USRobotics Installation CD-ROM for additional infor-
mation.

10
English
Troubleshooting
This basic procedure addresses a number of symptoms that you might experi-
ence with your router:
1. Verify the power cord and all the Ethernet cables are connected correctly.
This includes the cables connecting the router, the modem, and all the com-
puters in the network. See the Installation illustrations on page 3.
2. Ensure that the power outlet to which the router is connected is a live outlet.
3. Refer to the LED descriptions in this guide and then check the LEDs on the
router to make sure you are receiving power and all ports are functioning. See
the LED descriptions on page 1.
4. For wireless connections only: Low link quality or range can be caused by
environmental interference, such as lead-based paint and concrete walls, or
some electronic items, such as 2.4GHz phones. Try to move the antenna of
the router or reposition the wireless clients to improve the link quality.
5. For wireless connections only: Verify that each device connecting to the
router is set to Infrastructure mode. Set the Network name or SSID in the
wireless adapter’s settings to the Network name that is used in the router,
and verify that you are using the same wireless security type. Refer to your
wireless adapter’s documentation to determine how to change these settings.
If you still have trouble using the router, see the “Troubleshooting”section of
the User Guide on the USRobotics Installation CD-ROM.
The Setup Wizard was unable to detect my Internet connec-
tion.
Solution:
You will need to manually configure your Internet connection. There are two
methods of instructions you can follow to set up your Internet connection:
If you are still in the Setup Wizard:
1. Do one of the following:
"Verify the power cord and all the Ethernet cables are connected correctly,
then press Detect Connection to retry the automatic configuration of
your Internet connection.
"Manually configure your connection by selecting your Internet connec-
tion type: either Cable, DSL router, satellite, ISDN, LAN, or other or
DSL modem (also known as PPPoE) and any information required by
your ISP.
2. Click Next and continue to follow the on-screen instructions to complete the
Setup Wizard.
If you have already closed the Setup Wizard:
1. Start a Web browser.

English
11
2. In the location or address line of your Web browser, type http://
192.168.2.1 to access the router configuration pages.
3. Click the Internet tab.
"Select your Internet connection type: either Cable, DSL router, satel-
lite, ISDN, LAN, or other or DSL modem (also known as PPPoE)
and any information required by your ISP.
4. When you are finished, click Save. You should now be able to access the
Internet.
I am no longer able to access the Internet.
Solution 1:
1. Reboot your DSL or Cable modem. Wait for the modem to completely
reboot.
2. Press the Reset button on the back of your router for 1 second to reboot
your router. Wait for the router to completely reboot.
3. Reboot your computer. Wait for the computer to completely reboot and try
to access the Internet.
4. If you still cannot access the Internet, see the “Troubleshooting”section of
the User Guide on the USRobotics Installation CD-ROM for extended trou-
bleshooting on this issue.
Solution 2:
If your ISP assigned you a Static IP address, make sure that you have the correct
IP address, Subnet Mask, Default Gateway and DNS Servers from your ISP
entered in the Internet page.
My router’s configuration pages are not responding, but I can
still access the Internet.
Solution:
Press the Reset button on the router for 1 second to reboot the router. If you
are still unable to communicate with the router configuration pages, press in and
hold the Reset button for 7 seconds. This will reset the router to the factory
default settings. If you made any personal configuration settings, you will need to
make the changes again or restore your settings if you created a backup file.
Note:Pressing and holding the Reset button for 7 seconds will restore your
router to the factory default.

12
English
My ISP requires me to use a specific MAC address for the
device that connects to my modem.
Solution:
Your ISP may require you to change the router’s MAC address to match a spe-
cific MAC address, such as the address of the Ethernet adapter that was previ-
ously connected to the DSL or Cable modem. If you need the router to clone a
MAC address:
1. Complete the installation instructions in this guide.
2. When you are returned to the configuration pages after the initial configura-
tion, click the Internet tab.
3. Under Clone MAC address, use the Client devices list to select the MAC
address that should be applied to the router.
4. When you are finished, click Save. The router will restart and you should
then have an Internet connection.
Additional Information
For regulatory and warranty information, see the User Guide on the
USRobotics Installation CD-ROM.
For operation and configuration information, see the User Guide on the
USRobotics Installation CD-ROM. The User Guide contains detailed informa-
tion on the use and configuration of your Wireless MAXg Router.
For expanded troubleshooting and additional information, see:
1. See the User Guide on the USRobotics Installation CD-ROM.
2. Go to the Support section of the USRobotics Web site at
www.usr.com/support/.
Many of the most common difficulties that customers experience have been
addressed in the FAQ and Troubleshooting Web pages for your Wireless
MAXg Router. The Support pages also contain information on the latest
firmware and may contain documentation updates.
3. Submit your technical support question using an online form, or contact the
USRobotics Technical Support Department.
4. See the Support contact information on the last page of this guide.

Français
13
Français
Installation
Contenu de la boîte
Caractéristiques matérielles
Face avant
Le routeur comporte les voyants DEL de statut suivants :
!USRobotics Wireless MAXg Router !Antenne amovible
!Alimentation 9 VCC !CD-ROM d'installation
!Câble Ethernet !Guide d'installation rapide
Symbole Nom Etat Condition
Alimentation
Eteint Hors tension.
Continu Sous tension.
WLAN
(réseau sans fil)
Eteint La connexion sans fil est désactivée.
Continu La connexion sans fil est activée.
Clignotant Envoi ou réception de données.
WAN
(Internet)
Eteint Aucune connexion Internet établie.
Clignotant Envoi ou réception de données.
Continu Connexion Internet établie.
LAN
(1 à 4)
Eteint Pas de connexion LAN.
Continu Connexion LAN établie.
Clignotant Envoi ou réception de données.
Imprimante
Eteint Pas de connexion imprimante
détectée.
Continu Connexion imprimante détectée.
Clignotant Envoi de données à l'imprimante.

14
Français
Face arrière
Configuration requise
!Un ordinateur équipé d'un adaptateur Ethernet
!Un modem DSL ou câble Ethernet
!Un navigateur Web conforme HTML 4.01 avec activation Javascript
!Utilisateurs Safari : Safari 1.2 ou version ultérieure
Autres utilisateurs : un navigateur Web compatible HTML 4.01 avec activa-
tion Javascript
Elément Fonction
WAN
Connecte votre routeur à votre modem câble, modem
DSL ou votre réseau.
LAN 1 à 4
Connecte des périphériques supplémentaires à votre
routeur.
USB
Connecte votre routeur à une imprimante USB.
Reset (Réinitialiser)
Redémarre votre routeur ou rétablit les réglages
d'usine par défaut de votre routeur.
• Pour redémarrer votre routeur sans modifier vos
paramètres actuels, appuyez sur le bouton de réinitial-
isation (Reset) et maintenez-le enfoncé pendant 1 à
2 secondes.
• Pour rétablir les réglages d'usine par défaut de
votre routeur, appuyez sur le bouton de réinitialisation
pendant au moins 7 secondes.
9VDC (9 VCC)
Connecte l'adaptateur secteur à votre routeur.
Connecte une antenne au routeur.
WAN 1234
9VDC
Reset
USB

Français
15
Instructions d'installation
Etape un : Connexion de votre routeur
1. Connectez votre modem DSL ou câble au routeur :
A. Mettez hors tension l'ordinateur et le modem DSL ou câble.
B. Connectez l'antenne fournies à l'arrière du routeur.
C. Effectuez ensuite l'une des opérations suivantes :
Si votre modem se connecte à l'ordinateur avec un câble Ethernet :
repérez le câble Ethernet raccordant votre modem DSL ou câble à l'adap-
tateur Ethernet de l'ordinateur, et ne le débranchez que de votre
ordinateur : ne débranchez pas le câble de votre modem DSL ou câble..
Si votre modem se connecte à l'ordinateur avec un câble USB :
débranchez le câble USB du modem et de l'ordinateur. Il vous faudra un
autre câble Ethernet en plus de celui fourni avec le Wireless MAXg
Router. Connectez l'une des extrémités du câble Ethernet au port Ether-
net situé à l'arrière de votre modem DSL ou câble. .
D. Connectez l'extrémité libre du câble Ethernet au port WAN situé à
l'arrière du routeur.
Remarque :Le port USB du routeur ne permet de raccorder qu'une
imprimante USB. Ne connectez pas votre modem au port
USB du routeur. Pour lire des instructions sur la façon de
connecter une imprimante USB à votre routeur, consultez
la section « Installer une imprimante USB », page 19.
WAN
1234
9VDC
Reset
USB
WAN
1234
9VDC
Reset
USB
WAN
1234
9VDC
Reset
USB

16
Français
2. Connectez le routeur à votre ordinateur et aux périphériques réseau câblés.
A. Connectez une extrémité du câble Ethernet fourni au port Ethernet du
PC.
B. Connectez l'autre extrémité du câble à l'un des ports LAN du routeur..
3. Mise sous tension du réseau :
A. Allumez votre modem. Attendez que les voyants DEL du modem se sta-
bilisent avant de mettre sous tension votre routeur.
B. Branchez l'adaptateur secteur fourni sur le port 9 VCC du routeur.
C. Branchez l'adaptateur secteur dans une prise d'alimentation standard.
D. Allumez votre ordinateur.
Etape deux : Configuration des paramètres de connexion de base
1. Lancez votre navigateur Web.
2. Dans le champ d'adresse ou d'emplacement, tapez http://192.168.2.1
et appuyez sur Entrée pour accéder aux pages de configuration du routeur.
3. Cliquez sur Démarrer. L'assistant d'installation vous guidera tout au long du
processus de configuration de base du routeur.
Remarque :Ce produit est prévu pour être fourni avec une
connectique d’alimentation directe marquée UL Class 2,
de puissance 9 volts continu, 1200 mA.
Remarque :L'adresse par défaut du routeur est
http://192.168.2.1 .
Remarque :Si vous voyez s'afficher l'erreur « Page Not Found » (Page
non trouvée) pendant que vous parcourez les pages de
configuration du routeur, appuyez sur le bouton
Précédent de votre navigateur Web ou actualisez la page.
WAN
1234
9VDC
Reset
USB
WAN
1234
9VDC
Reset
USB