Utemaster Sports Bar Load-Lid User manual

© Copyright Utemaster NZ Ltd. 1
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
Ford Ranger FX4 Double Cab
Sports Bar Load-Lid™
Under Rail Liner
Despatch list:
CT5
M8 Fender
Washer
M8 Spring
Washer
TK-M8x25
50315-01-05L
50315-01-05R x4
x4
x2
x2
x2
x2 M6 Medium
Washer
x1 M8x25 Buon
Head Bolt
x4
x8
x4 M6 Spring
Washer
M6x16
Buon Head
Bolt
x1 M8 Medium
Washer
M8x30 Countersink
Bolt
M8x50 Countersink
Bolt
x2
x2
50315-16-06
6mm Foam
Foot
x2
x2
50315-16-07
3mm Foam
Foot
50315-16-08
6mm Foam
Foot
1xL
1xR
50315-16-09
3mm Foam
Foot
x2
90-120 minutes

© Copyright Utemaster NZ Ltd. 2
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
1
Highly recommend watching
the video before installaon.
Scan the QR code.
Sports Bar
Preparaon
Video
hps://wi.st/2Si0Pnz
Remove the rubber
feet from the Sports
Bar.
2
Cut the rubber feet as
per the video.

© Copyright Utemaster NZ Ltd. 3
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
3
1.
3.
4.
5.
6.
50315-16-06 6mm
Foam Foot
x2
50315-16-07
3mm Foam
Foot
50315-16-09
3mm Foam
Foot
x2
1.__
2.__
2.
Trimmed rubber
feet
x2
3.__ x2 50315-16-08
6mm Foam
Foot
4.__
5.__ Trimmed rubber
feet
6.__
x2
1xL
1xR
Insert foam feet to the
sport bar.

© Copyright Utemaster NZ Ltd. 4
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
4
5
1.
2.
3.
6.
5.
4.
3.
2.
1.
x1
x1
1.____
2.____
x2
x2
x2
x1
1.__
2.__
3._
4._
5._ x1
6._ x1
Bolts go into exisng
threads in the tray.

© Copyright Utemaster NZ Ltd. 5
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
6
1.___
• Bolts go into exisng
threaded holes in the
sport bar.
• Begin threading the
bolt using a hex key to
prevent cross-
threading
• Use lubricant if the
thread is too ght
• Fasten BOTH SIDES.
1.
x2
2.___ x2
2.

© Copyright Utemaster NZ Ltd. 6
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
Note: Place cardboard
between cab and tray
to protect the paint
from scratching during
installaon.
8
7
1. 1. Customer provided
cardboard.
Load-Lid™
Fing Video
hps://wi.st/2OW7L7N

© Copyright Utemaster NZ Ltd. 7
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
Pull Load-Lid™ back to ensure face plate tab is sing rmly against the tray.
9

© Copyright Utemaster NZ Ltd. 8
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
10
Make sure the Load-Lid is
sing rmly on BOTH
SIDES.
Ensure
Load-Lid™
Is sing
square on
the tray.

© Copyright Utemaster NZ Ltd. 9
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
1.
2.
3.
4.
11
Only clamp through the rear
two slots marked ‘A’ at this
stage.
x2
x2
x2
x2
1.______
2.______
3.______
4.______
A
A

© Copyright Utemaster NZ Ltd. 10
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
Clamp through the two
remaining slots.
12
3.
2.
1.
x2
x2
x2
1.______
2.______
3.______

© Copyright Utemaster NZ Ltd. 11
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
13
1. Adjust the nuts shown on
the lock strike to aect
the nal closing height of
the Load-Lid™
2. Refer to the video shown
on the QR code below for
details.
Slam Lock
Adjustment
Video.
hps://wi.st/2Bp7XJ9
IMPORTANT NOTE:
When removing and reng lock the lid into the mounng frame before undoing the clamps
and removing the lid (this prevents damaging the tray).

© Copyright Utemaster NZ Ltd. 12
Australia Support:
P: 1800 353 383
E: [email protected].au
W: www.utemaster.com.au
NZ Support:
P: 0800 683 352
E: [email protected]
W: www.utemaster.co.nz
Your Load-Lid™ is now fully ed and ready to use. We recommend frequently ghtening the clamps
and greasing the lock to enjoy the full benets of your Load-lid.
Thank you again for using Utemaster and don’t forget to keep checking our website for our latest
innovaons!