UTEPO UPD7301 User manual

PoE++ Splitter
1
2
Packing List
Please check the following items after unpacking, if any missing, please contact your local dealer.
Items
Quantity
Splitter
1
Mounting Accessory
1
Quick Installation Guide
1
Product Overview
This product is Single-Port 10M/100M/1000M/2.5Gbps 802.3bt PoE++ Splitter.
It can convert standard IEEE 802.3bt PoE++ up to 90W input power to 5/9/12/20/24V up to 60W DC power
output. By adopting the device, it has no need to deploy power sockets and will reduce the cost of wiring
and installation, designed to solve the issue of the difficulty in finding power outlets in outdoor places. Being
able to operate under wide temperature range from -20 to 60 degrees C, it can be placed in almost any
difficult environment.
It is designed with metal shell and 6kV ESD capability. It is suitable for either DIN rail or wall mounting, can
be widely used as power supply for IPC, AP and other equipment. It also supports function expansion of
network transmission.
Appearance
Dimensions (mm)
Front Panel
Indicator
Indicator
Status
Description
PWR indicator
Solid green
The power is on.
Off
The power is off.
PoE status indicator
90W solid red
The PoE input is 60-90W.
60W solid orange
The PoE input is 30-60W.
30W solid green
The PoE input is 0-30W.
DC Output2 DIP Switch
DIP Status
Description
The DC Output2 is 20V.
The DC Output2 is 12V.
The DC Output2 is 9V.
The DC Output2 is 5V.
Single-Port 10M/100M/1000M/2.5Gbps 802.3bt PoE++ Splitter
Quick Installation Guide

PoE++ Splitter PoE++ Splitter
3
4
Caution
Please find the following solution when the device doesn't work. Please confirm if the installation is correct:
Please confirm if the RJ45 cable order in accordance with the EIA/TIA568A or 568B industry standards.
Please do not connect the network device which consumption exceeds the maximum output consumption
of the port.
Please replace a normal device with a failure one to check if the device is broken.
If the problem still exists, please contact the factory.
Installation
1) Turn off the system's power before the installation.
2) Connect the data Port of the Splitter with IP Camera. And connect PoE Splitter to IP Camera with DC power
cable. Then connect the PoE Port of the Splitter with switch.
Applications
Specifications
Items
Hardware specifications
Interface
1*10M/100M/1000M/2.5GBase-T PoE++ RJ-45(Auto-MDI/MDI-X)
1*10M/100M/1000M/2.5GBase-T RJ-45(Auto-MDI/MDI-X)
DC Output Connector
DC output1: 2-PIN plug connector
DC output2: 2-PIN plug connector or DC connector
DC Output Specifications
DC output1: 24V [email protected]
DC output2: 5V DC@5A, 9V DC@5A, 12V DC@5A, 20V DC@3A,
Support over current protection, short circuit protection
LED Indicator
1*SYS, system indicator
3*PoE status indicators
5*DC output status indicators
Dimensions (L*W*H)
143mm*103mm*36mm
Material
Metal shell
Color
Black
PoE
PoE Standard
IEEE 802.3af/at/bt
PoE Pin Assignment
3/6/4/5(+), 1/2/7/8(-)
PoE Budget
90W max
Reliability
ESD
IEC61000-4-2, Level 3: Contact Discharge: ±6kV, Air Discharge: ±8kV
Operating
-20°C~60°C, 5%~95%(Non-condensation)
Storage
-40°C~85°C, 5%~95%(Non-condensation)
Version: V1.0, updated 2023-02-07.
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute a warranty of any kind, express or implied.