V-tech Disney Toot-Toot Drivers Minnie's Ice Cream... Assembly Instructions

91-003539-001
Minnie’s Ice Cream Parlour
Parent’s Guide
© Disney
www.disney.com UK

C
M
Y
CM
MY
CY
CMY
K
Grow with VTech(101x127)bw1P-V2.pdf 1 08/18/2014 9:29:01

2
INTRODUCTION
Thank you for purchasing the VTech®Toot-Toot Drivers®Minnie’s
Ice Cream Parlour! Take a ride with Minnie and her Ice Cream Truck
down the tracks and through the gate to deliver ice cream and treats.
SmartPointTM
Minnie Ice Cream
Truck
Lift
Three SmartPointTM
Locations
Shape
Sorter
Two Gears
Three Shape
Blocks

3
INCLUDED IN THIS PACKAGE
One second
level track
One shape sorter
Shape sorter
support B
One SmartPointTM
Minnie Ice Cream Truck
One lift
guide rail
One lift wall One lift
Shape sorter
support A
One delivery
launcher
One gate
Base wall A Base wall B

4
Three shape
sorter blocks One ramp exit One ramp exit
sign
One exit track One parlour sign One ramp track
One label sheet
Two gears
- One parent’s guide
Base wall C Base wall D

5
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
Adult assembly required. For your child’s safety, do not let your
child play with the toy until it is fully assembled.
Unlock the packaging locks:
Turn the packaging locks anticlockwise
several times.
Pull out and discard the packaging locks.
GETTING STARTED
BATTERY INSTALLATION
Ice Cream Truck
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the Ice Cream Truck. Use a
screwdriver to loosen the screw.
3. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for maximum performance).
4. Replace the battery cover and tighten the screw to secure the
battery cover.
BATTERY NOTICE
• Useonlybatteriesofthesameorequivalenttypeas
recommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard

6
(carbon-zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(if
removable).
• Rechargeablebatteriesareonlytobechargedunderadult
supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specified value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery
Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com

7
LABEL APPLICATION
Please adhere the labels to the play set securely as
indicated on the following pages:
12
6
7
8
9
10
3
5
11 12
4
13
14
15
16
14
2
9
3
5
15 10
14 8
6

8
7
11 13
16
17
12

9
ASSEMBLY INSTRUCTIONS
Minnie’s Ice Cream Parlour
1. Insert the two Gears into Base Wall B, as shown below. You will
hear a “click” sound to indicate the pieces are secure.
2. Insert Base Walls A, B, C and Dinto the Second Level Track,
as shown below. You will hear a “click” sound to indicate the
pieces are secure.
3. Insert the Gate into the Second Level Track, as shown below.
You will hear a “click” sound to indicate the piece is secure.
With the VTech®Toot-Toot Drivers®Minnie’s Ice Cream Parlour,
safety comes first. To ensure your child’s safety, adult assembly is
required.

10
4. Attach the Lift Guide Rail to the Lift Wall. Then, insert the Lift
Guide Rail into the Lift, as shown below.
5. Insert the Lift Support Wall into the Second Level Track, Base
Wall B and Base Wall C, as shown below. You will hear a “click”
sound to indicate the pieces are secure.
6. Insert Shape Sorter Support A and Binto the Second Level
Track. Then, insert the Parlour Sign into Shape Sorter Support
A, as shown below. You will hear a “click” sound to indicate the
pieces are secure.

11
7. Insert the Delivery Launcher into the Second Level Track, as
shown below.
8. Insert the Shape Sorter into the Shape Sorter Supports, as
shown below. You will hear a “click” sound to indicate the pieces
are secure.
9. Attach the Ramp Track to the Second Level Track, as shown
below.

12
10. Attach the Ramp Exit Sign to the Ramp Exit. Then, insert the
Ramp Exit to the Exit Track, as shown below. You will hear a
“click” sound to indicate the pieces are secure.
Once you’ve completed the above steps, connect the tracks and
you’re ready to play! You can connect this play set to other Toot-Toot
Drivers®tracks and play sets (each sold separately).
EXPAND & EXPLORE
Connect to the Toot-Toot Drivers® Mickey’s Choo-Choo Express
(as shown below) or other Toot-Toot Drivers® play sets (each sold
separately) to expand Minnie’s Ice Cream Parlour and inspire
creativity.

13
PRODUCT FEATURES
Ice Cream Truck
1. ON/OFF SWITCH
To turn the unit ON, slide the On/Off
Switch to the ON ( ) position. To
turn the unit OFF, slide the On/Off
Switch to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the Ice Cream Truck will automatically
power down after approximately 50 seconds without input. The
unit can be turned on again by pressing the Character Button
or by pushing the Ice Cream Truckquickly.
Note: This product is in Try-Me mode in the packaging. After
opening the package, turn the Ice Cream Truck off and on
again to proceed with normal play. If the unit repeatedly powers
down while playing, we suggest changing the batteries.
ACTIVITIES
Ice Cream Truck
1. Slide the On/Off Switch to the ON
position to turn the unit ON. You will
hear a song, a phrase and sounds.
The lights will flash with the sounds.
2. Press the Character Button to hear
fun sounds, songs and phrases. The
lights will flash with the sounds.

14
3. Push the Ice Cream Truck to hear
fun sounds and melodies. While the
melody is playing, push the vehicle
again to add in fun sounds on top of
the melody. The lights will flash with
the sounds.
4. For added fun, the Ice Cream Truck interacts with the Toot-
Toot Drivers®Minnie’s Ice Cream Parlour. Simply roll
or put the Ice Cream Truck on one of the play set’s three
SmartPointTM locations to hear the Ice Cream Truck play fun
sounds, short tunes and phrases.
ACTIVITIES
Minnie’s Ice Cream Parlour
1. Place the Ice Cream Truck on any
of the play set’s three SmartPointTM
locations to trigger fun sounds,
phrases and music.
2. Put the Ice Cream Truck on the Lift
and lift it up and down.

15
3. With the vehicle in the Delivery
Launcher, place the Shape Sorter
Blocks in the Shape Sorter.Then,
pull the lever to drop a Shape
Sorter Block into the back of the Ice
Cream Truck.
SONGS
1. Delivering here,
Delivering there,
Delivering ice cream everywhere!
2. Did you ever see a sweet treat?
A sweet treat,
A sweet treat,
Did you ever see a sweet treat?
You didn’t want to eat.
3. Come and pick out your favourite treat.
Cause Minnie’s ice cream just can’t be beat!
MELODY LIST
1. Chopsticks
2. Did you Ever See a Lassie?
3. Flight of the Bumblebee
4. Jack Be Nimble
5. Little Miss Muffet
6. Where Has My Little Dog Gone?

16
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
followthesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit sit for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play with
again.
5. If the product still does not work, install a brand new set of
batteries.
If the problem persists, please call our Consumer Services
Department on 0330 678 0149 (from UK) or + 44 330 678 0149
(outside UK) and a service representative will be happy to help you.

17
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by
a responsibility that we take very seriously. We make every
effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It
is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department
on 0330 678 0149 (from UK) or + 44 330 678 0149 (outside UK),
with any problems and/or suggestions that you might have. A
service representative will be happy to help you.

P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
ONE
YEAR

91-003539-001
Visit our website for more
information about our products,
downloads, resources and more.
www.vtech.co.uk
TM & © 2018 VTech Holdings Limited.
All rights reserved.
Printed in China.
UK