V-tech Magic Lights 3D User manual

Instruction Manual

2
2
2
INTRODUCTION
Enjoy arts and crafts, minus the mess with Magic Lights 3D! This
brilliant peg art provides hours of entertainment with 180 pegs in 6
different colours stored away in a compact case. Transform your art
into a masterpiece using the light codes to light up your designs with
fun sounds and music.
INCLUDED IN THIS PACKAGE
• Light Box
• Storage Box
• 180 pegs in 6 colours
• Paper Stand
• Booklet
• Quick Start Guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy and should be discarded for your child’s safety.
NOTE: Please save this Instruction Manual as it contains important
information.
WARNING:
CHOKING HAZARD - This toy contains small parts and is not suitable
for children under 4 years of age.

3
3
3
PRODUCT FEATURES
Hinge
Volume +
Battery Door
Paper Stand
Volume –
Speaker Play/Pause
Light Code Buttons
Power
On/Off
Lightbox
Panel

4
4
4
FEATURES ACTION
Hinge Open the lightbox at a 90 degree angle for
3D Mode play, to use Picture Mode open the
lightbox to 180 degrees until it lies at.
Volume Buttons Press the - / + buttons to decrease or increase
the volume. There are seven volume levels.
Light Code
Buttons
To animate your creations, enter the light
code sets with the four different light code
buttons (circle/triangle/square/star). Entering
the different light code combinations
will present different animations. These
combinations are available in the instruction
booklet and online.
Play/Pause
Button
Press the Play/Pause Button to start playing
the last lightshow effect or pause the current
lightshow effect.
Power Button Press the Power Button to turn the unit ON.
Press the button again to turn the unit OFF.
Lightbox Panel Pin the pegs onto the lightbox panels to
create your art.
Sleep Mode If there is no input after 3 minutes, the
lightshow animation will then turn off and
enter Sleep Mode, press the Play Button to
replay the lightshow.
Automatic
Power Off
If there is no input after 30 minutes, the unit
will turn off automatically. Press the Power
Button again to turn the unit on.

5
5
5
INSTRUCTIONS
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the unit. Use a screwdriver to loosen
the screw and then open the battery
cover.
3. If used batteries are present, remove
these batteries from the unit by pulling
up on one end of each battery.
4. Install 4 new AA (AM-3/LR6) batteries
following the diagram inside the
battery box. For best performance,
alkaline batteries or fully charged
Ni-MH rechargeable batteries are
recommended.
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
To Begin Play
Press the Power Button to turn on the main unit.
Follow the Instruction Manual to play.
To Make Stand
123 4

6
6
6
BATTERY NOTICE
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are
to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Disposeofbatteriessafely.Donotdisposeofbatteriesinre.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicatethatthebatterycontainsmorethanthespecied
value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in
Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.

7
7
7
VTech®cares for the planet.
Care for the environment and give your toy a second life by disposing
of it at a small electricals collection point so all its materials can be
recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces, and do not expose the
unit to moisture or water.
5. If the unit is not working properly, install a brand new set of
batteries.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, install a brand a new set of
batteries.
If the problem persists, please contact our Consumer Services
Department, and a service representative will be happy to help you.

8
8
8
CONSUMER SERVICES
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
UK Customers:
Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.vtech.com.au
NZ Customers:
Phone: [phone]
Website: support.vtech.com.au
PRODUCT WARRANTY/
CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer
guarantees apply to goods and services supplied by VTech
Electronics (Australia) Pty Limited. Please refer to vtech.com.au/
consumerguarantees for further information.

TM & © 2022 VTech Holdings Limited.
All rights reserved.
IM-535400-000
Version:0
Visit our website for more
information about our products,
downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au