V-tech Push & Explore Elephant 5136 Assembly Instructions

Parent’s Guide
Push & Explore Elephant™
91-003606-003

INTRODUCTION
Thank you for purchasing the Push & Explore Elephant™.
Move and play with this interactive elephant to build motor skills.
Pressing the buttons introduces shapes and animals. Hear playful
phrases, melodies, cute songs and fun sounds while exploring with
your new elephant friend!
Textured Ears
Light-Up Heart Button
On/Off/Volume
Control Switch
Turning
Trunk
Animal Buttons
2

INCLUDED IN THIS PACKAGE
• One Push & Explore Elephant™
• One parent’s guide
WARNING: All packing materials such as tape, plastic sheets,
packaging locks, removable tags, cable ties and
packaging screws are not part of this toy, and
should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains
important information.
ATTENTION : Pour la sécurité de votre enfant, débarrassez-
vous de tous les produits d’emballage tels que
rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas
partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents
car il comporte des informations importantes.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the unit. Use a screwdriver to loosen
the screw.
3. Install 1 new AAA (AM-4/LR03) battery
following the diagram inside the
battery box. (The use of a new alkaline
battery is recommended for maximum
performance.)
4. Replace the battery cover and tighten the screw to secure.
3

BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
PRODUCT FEATURES
1. On/Off/Volume Control Switch
To turn the unit ON, slide the On/Off/
Volume Control Switch to the Low
Volume ( ) or High Volume ( )
position. You will hear a song, a phrase
and a short tune. To turn the unit OFF,
slide the On/Off/Volume Control
Switch to the OFF ( ) position.
4

2. Automatic Shut Off
To preserve battery life, the Push & Explore Elephant™will
automatically power down after approximately 45 seconds
without input. The unit can be turned on again by pressing one
of the buttons.
NOTE: If the unit repeatedly powers down when playing, we recommend
changing the batteries.
ACTIVITIES
1. Light-Up Button
Press the Light-Up Button to learn
about shapes, feelings and numbers,
and hear songs, playful sounds and
melodies.
2. Animal Buttons
Press the Animal Buttons to learn
about animals and shapes, and hear
songs, playful sounds and melodies.
3. Motion Sensor
Push the elephant to activate the
Motion Sensor and hear a variety of
playful sounds and short phrases.
If a melody is playing, activate the
Motion Sensor to hear fun sounds
play over the melody.
5

SONG LYRICS
Song 1
I’m just a little elephant,
With two big ears and one long trunk.
Push me along so we can play,
Let’s go on a learning journey.
Song 2
Hello, Hello,
Let’s sing with the animal friends.
Hip-Hip Hooray!
MELODY LIST
1. Aloha ‘Oe
2. Animal Fair
3. Billy Boy
4. B-I-N-G-O
5. Canon In D
6. Did You Ever See a Lassie?
7. Turkey in the Straw
8. Rockin’ Robin
9. Oh! Susanna
10. Polly Wolly Doodle
11. Toyland
12. When the Saints Go Marching In
13. Yankee Doodle
14. Chopsticks
15. Row, Row, Row Your Boat
6

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
sources.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose the unit
to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by
going to our website at vtechkids.com and lling out our Contact Us
form located under the Customer Support link. A service representative
will be happy to help you.
7

IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by
going to our website at vtechkids.com and lling out our Contact Us
form located under the Customer Support link with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
8

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Supplier’s Declaration of Conformity
Trade Name: VTech®
Model: 5136
Product name: Push & Explore Elephant™
Responsible Party: VTech Electronics North America, LLC
Address: 1156 W. Shure Drive, Suite 200,
Arlington Heights, IL 60004
Website: vtechkids.com
9

91-003606-003
TM & © 2018 VTech Holdings Limited.
All rights reserved.
Printed in China.
Visit our website for more
information about our products,
downloads, resources and more.
vtechkids.com
Read our complete warranty policy online at
vtechkids.com/warranty