Value 19.99.1092 User manual

4
USB Wall Charger,
QC3.0, 1-Port, 18W
19.99.1092
User Manual

4
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or using this product. Please keep this manual for future
reference.
1.0 INTRODUCTION
This product is a high-performance quick travel charger. It is equipped
with one USB port - compliant with Qualcomm® Quick Charger™ 3.0
technology- for output. Plug the product into an AC socket, then you
can charge your device (MP3, mobile phones, etc.) via the USB port.
2.0 FEATURES
 Allows 100V-240V AC 50Hz~60Hz of input voltage.
 Intelligent integrated circuit equipped measures output and
automatically adjusts power outputs of 3.6~6.0V/3A, 6.0~9V/2A,
and 9~12V/1.5A for charging fast and safety.
 Compliant with Quick Charger 3.0, charging speed is four times
faster than normal charger.
 The product id backwards compatible Quick Charger 2.0, and the
default output is 5V/3A.
 Over current protection with auto-recovery.
 Short circuit protection with auto-recovery.
 Over temperature protection with auto-recovery.
 Has strong anti-interference ability and a stable performance.
 It is light, smart and convenient to use.

4
3.0 SPECIFICATIONS
Input/Output
Input 100-240V AC 50/60Hz
Input Pin European Standard
Output 3.6~6.0V/3A, 6.0~9V/2A,
9~12V/1.5A
Output Port USB-A Port
Protection
Output Over Current Protection Yes
Over Load Protection Yes
Over Temperature Protection Yes
Short Circuit Protection Yes
Performance
Ripple And Noise ≤200mV
Efficiency ≥81.4%
Mechanical
Size(L*H*W) 45*23*35 mm
Color Black
Note:
1. This charger is compliant with Qualcomm Quick Charge 3.0,
charging speed is four times faster than normal charger.
2. This charger backwards compatible Quick Charger 2.0, and the
default output is 5V/3A.
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
 Main unit ×1
 User Manual ×1

4
5.0 OPERATION
Operation Procedures
1. Plug the travel charger into a socket and the LED light will turn
blue.
2. Plug one USB connector of the cable into the interface of the
charger and plug the other connector of the cable into the
electronic device (mobile phone, MP3, tablet, PC, etc.).
3. Please unplug the travel charger after the electronic device is fully
charged.
Operation Notes
1. For optimum performance, please use the travel charger
according to the user manual.
2. Please plug the travel charger into a socket which voltage range
should be 100~240VAC.
3. Please unplug the travel charger after using.
4. Do not use the travel charger with an electronic product which is
not in conformity with the specifications, to avoid any problem
caused by specification mismatching.
5. It is normal that the travel charger will get a little bit warm in the
use process.
6. When the travel charger stops working under over-current, over-
temperature or short-circuit protection, please unplug the device
after it automatically returns to work, the you need to check
whether the device is compatible with this charger.
7. Do not let the travel charger close to fire, such as stove, candles,
etc.
8. Do not let the travel charger soak into liquid, such as swimming
pool, bathtub, etc.
9. Do not wash the travel charger with a corrosive cleaner.
10. If the travel charger does not work properly, please contact your
vendor.