Vantec CB-IUSB20 User manual

PRODUCT DESCRIPTION
Adding additional storage to your computer has
never been so easy. Whether you have run out of
available IDE ports or simply want to give hot-
swap plug and play capabilities to a hard drive,
the Vantec IDE-USB Adapter does the job. By
conveting the IDE interface of hard drives to USB,
the IDE-USB Adapter allows you to add a hard
drive either inside or outside your system. The
IDE-USB Adapter also utilizes USB 2.0, offering
speeds up to 480Mbps, 40 times the speed of
USB 1.1! But if you are using USB 1.1, the IDE-USB
Adapter is still an ideal way to store and transfer
large amounts of data.
MODEL: CB-IUSB20
SPECIFICATION
Interface: 3.5” or 2.5”IDE to USB 2.0
Length: 140cm (55in)
SYSTEM REQUIREMENTS
Intel Pentium II 350MHz-compatible or Apple G3
processor and greater
Microsoft Windows 98SE/ME/2000/XP or Mac OS
8.6 and greater
USB-equipped system
For USB 2.0 speeds, the system must support USB
2.0 specifications
CD Rom drive (if drivers are needed)
FEATURES
Transfer Rates Up to 12Mbps With USB 1.1
Transfer Rates Up to 480Mbps With USB 2.0
Easily add storage to any system with USB
Supports up to 400GB drives
Hot-swappable: Plug and play without rebooting!
IDE TO USB ADAPTER
SUPPORT 2.5”, 3.5” & 5.25” DRIVE
USB 2.0
Connects a drive to any PC USB port
internally or externally !!