manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Vantec
  6. •
  7. Adapter
  8. •
  9. Vantec CB-STU3-2B User manual

Vantec CB-STU3-2B User manual

Installing the CB-STU3-2B, USB 3.0 to 2.5” SATA Hard Drive Adapter without Protective Case
Connect the USB adapter to your 2.5” SATA HDD or SSD.
2.
Connect SATA interface
Connect the USB connector from the adapter to your computer
system. The device is now ready for use.
3.
Verify the package contents.
1.
USB 3.0 to 2.5”
SATA Adapter
Installation Guide
Installing the CB-STU3-2PB, USB 3.0 to 2.5” SATA Hard Drive Adapter with Protective Case
Verify the package contents.
1.
Installation Guide
USB 3.0 to 2.5”
SATA Adapter
Insert the USB Adapter into the adapter housing of the case.
Close the cover until you hear the click to make sure it is locked.
2.
Close
Snap & Lock
Connect the USB connector from the adapter to your computer system. The device is now ready for use.
4.
3. Insert the 2.5" HDD/SSD into the protective case until the SATA adapter connector mate with the SATA port on the
HDD/SSD. Close the cover until you hear the click to make sure it is locked.
Snap & Lock
Close
Insert
NOTE:
NOTE: New hard
drives needs to be
initialized and
partitioned before it
will appear in
Windows Explorer or
Mac desktop. Please
refer to “Creating a
New Partition” within
the manual.
Nota: Si la unidad de
disco duro es nueva,
deberá inicializarla y
particionarla para que
aparezca en el
Explorador de Windows
o en el escritorio de Mac.
Consulte la sección
“Crear una partición
nueva” en el manual.
Remarque : Les
nouveaux disques durs
doivent être initialisés et
partitionnés avant
d’apparaître dans
Windows Explorer ou
Mac desktop. Veuillez
consulter le chapitre
“Créer une nouvelle
partition” de ce manuel.
Hinweis: Eine neue
Festplatte muss
initialisiert und partitioniert
werden, bevor sie im
Windows Explorer oder
auf dem Mac-Desktop
erscheint. Lesen Sie
hierzu bitte “Erstellen
einer neuen Partition” in
diesem Handbuch.
Nota: I nuovi dischi
rigidi devono essere
inizializzati e
partizionati prima che
appaiano nel desktop
di Windows Explorer o
Mac. Fare riferimento
a "Creazione di una
nuova partizione" nel
manuale.
注意:新的硬盘驱动器出现
在 Windows Explorer 或
Mac 桌面上之前,需要初始
化并分区。请参考本手册中
的“创建新的分区”。
NOTE:
NOTE: Do not remove
the hard drive while it
is in use. Doing so
may corrupt the data
on the hard drive or
cause damage to the
hardware.
Nota: No desconecte la
unidad de disco duro
mientras se encuentre
en uso. Si lo hace,
podría dañar los datos
almacenados en ella o
provocar averías de
hardware.
Remarque : Ne retirez
pas le disque dur lorsqu’il
est en cours d’utilisation.
Cela pourrait
endommager les
données du disque dur
ou même le matériel.
Hinweis: Finden Zugriffe
auf die Festplatte statt,
dürfen Sie sie nicht
entfernen. Andernfalls
können die Daten auf der
Festplatte oder die
Hardware beschädigt
werden.
Nota: Non rimuovere il
disco rigido mentre è
in uso. In questo
modo i dati presenti
sul disco rigido
possono danneggiarsi
o si può causare
danni all'hardware.
注意:不要移除正在使用的
硬盘驱动器,否则会破坏硬
盘上的数据,甚至会造成硬
件损坏。
Corpyright © 2015 Vantec Thermal Technologies. All Right Reserved. | All Registered Trademarks Belong To Their Respective Companies.
Model: CB-STU3-2B & CB-STU3-2PB
Protective Case
Federal Communications Commission Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.

This manual suits for next models

1

Other Vantec Adapter manuals

Vantec CB-ISA225-U3 User manual

Vantec

Vantec CB-ISA225-U3 User manual

Vantec NexStar FX User manual

Vantec

Vantec NexStar FX User manual

Vantec NBA-100U User manual

Vantec

Vantec NBA-100U User manual

Vantec UGT-PCE2S1P User manual

Vantec

Vantec UGT-PCE2S1P User manual

Vantec CB-U320GNA User manual

Vantec

Vantec CB-U320GNA User manual

Vantec CB-CU300GNA User manual

Vantec

Vantec CB-CU300GNA User manual

Vantec NBV-100U User manual

Vantec

Vantec NBV-100U User manual

Vantec CB-USB20PL User manual

Vantec

Vantec CB-USB20PL User manual

Vantec CB-ISA225-U3 Instruction Manual

Vantec

Vantec CB-ISA225-U3 Instruction Manual

Vantec CB-U300GNA User manual

Vantec

Vantec CB-U300GNA User manual

Vantec CB-ESATAU3-6 User manual

Vantec

Vantec CB-ESATAU3-6 User manual

Vantec CB-ISATAU2 User manual

Vantec

Vantec CB-ISATAU2 User manual

Vantec NexStar User manual

Vantec

Vantec NexStar User manual

Vantec CB-IUSB20 User manual

Vantec

Vantec CB-IUSB20 User manual

Vantec NextStarFX User manual

Vantec

Vantec NextStarFX User manual

Vantec CB-USB20SR User manual

Vantec

Vantec CB-USB20SR User manual

Vantec CB-SATAU3 User manual

Vantec

Vantec CB-SATAU3 User manual

Vantec SATA/IDE to USB 2.0 Adapter None User manual

Vantec

Vantec SATA/IDE to USB 2.0 Adapter None User manual

Popular Adapter manuals by other brands

TP-Link TL-WN8200ND user guide

TP-Link

TP-Link TL-WN8200ND user guide

Kogan KABLUWAAFSP user guide

Kogan

Kogan KABLUWAAFSP user guide

Brainboxes BL-521 Specifications

Brainboxes

Brainboxes BL-521 Specifications

Amedia DMA 3.1L user manual

Amedia

Amedia DMA 3.1L user manual

NETGEAR WNDA3200 user manual

NETGEAR

NETGEAR WNDA3200 user manual

Buffalo Tech WLI-UC-G300N quick start guide

Buffalo Tech

Buffalo Tech WLI-UC-G300N quick start guide

Allen-Bradley 140G Series Installation

Allen-Bradley

Allen-Bradley 140G Series Installation

TDK SESUB-PAN-T2541 EVK quick start guide

TDK

TDK SESUB-PAN-T2541 EVK quick start guide

Samsung EE-P5400 user manual

Samsung

Samsung EE-P5400 user manual

Sony AC-PW10AM operating instructions

Sony

Sony AC-PW10AM operating instructions

RKI Instruments 30-0954RK-201 Operator's manual

RKI Instruments

RKI Instruments 30-0954RK-201 Operator's manual

Enduro BC101 user manual

Enduro

Enduro BC101 user manual

StarTech.com USB31000SA instruction manual

StarTech.com

StarTech.com USB31000SA instruction manual

Philips LIGHTOLIER IS-LLAH11 manual

Philips

Philips LIGHTOLIER IS-LLAH11 manual

Rockwell Automation Allen-Bradley PowerFlex 20-COMM-L user manual

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20-COMM-L user manual

ViewSonic WPCC100 user guide

ViewSonic

ViewSonic WPCC100 user guide

Fluke Norma Star Point Features

Fluke

Fluke Norma Star Point Features

StarTech.com PEXUSB3S11 instruction manual

StarTech.com

StarTech.com PEXUSB3S11 instruction manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.