Vantec NexStar DX User manual

Installation Guide
SATA Port
SATA Data and
Power Connector
Package content Remove the back panel
1. Slide the tray out
2.
Connect the SATA connector
4.
Insert the 5.25" device
3.
6. Screw the drive firmly
Align the device to the front edge
5.
Slide the tray back into enclosure and install the back panel
7.

Copyright © 2016 Vantec Thermal Technologies. All Right Reserved. All Registered Trademarks Belong To Their Respective Companies.
Model: NST-536S3-BK
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.
Printed in China
Printed on Recycled Paper.
8
Power Cable
9
USB 3.0 Cable
External 5.25” Optical Drive Enclosure
USB 3.0 External Interface
10 PowerSwitch
Connect power cable
8.
Connect USB cable
9.
Turn on the power
10.
The computer will automatically detect the device
11.
Ready to use
12.