Vauban Systems V-Reader User manual

TECHNICAL MANUAL
V-Reader
Reader

www.vauban-systems.fr

3
CONTENTS
01. Thank You 4
02. Information and recommendations 5
03. Technical characteristics 7
03.1 PRODUCT INFORMATION 7
03.2 POWER SUPPLY FEATURES 7
03.3 FEATURES 7
03.4 OPERATING TEMPERATURE 8
04. Buzzer / Led 8
05. Anti-pullout function 9
06. Connection of the reader on
a VERSO®+ control unit 10
07. ®13
07.1  13
07.2  13
08. Fixation 14
09. Dimensions 14
10. Free installer hotline 16

4
01. Thank You
Dear client,
"V-READER" reader
created by the French company, VAUBAN SYSTEMS®.
Shown in our products.

www.vauban-systems.fr.
We wish you a trouble-free installation.
VAUBAN SYSTEMS®

5
VAUBAN SYSTEMS declares that the V-Reader range
complies with the fundamental requirements of Directive
RED 2014/53/EU and RoHs 2011/65/EU.
Conguration on VISOR®:
›Pour le V-Reader : V2.0.0.30 minimum and the
control unit must be V3.5 at a minimum.
›Pour le V-Reader KP : V2.0.0.33 minimum and the
control unit must be V3.8 at a minimum
›This device complies with Part-15 of the FCC and with the
ISED licence without RSSs.
›
• -
ence.
• 2) This device must accept any received interference,

Note: The manufacturer is not held responsible for radio
-


02. Information and
recommendations

6
›
exposure to RF, in compliance with RSS-102 issue 5 for
conditions of use.
›


DEEE established by ESR-RECYLUM
to which the manufacturer has adhered and to which he

›
to use them anymore, to send them to the DEEE control


used equipments. More information here: www.recylum.fr.

7
03.1 PRODUCT INFORMATION
03.2 POWER SUPPLY FEATURES


62368-1)
Power supply:
Max consumption at 12 Vdc: 140 mA
03. Technical characteristics
Connector Cable exit
Brown
Red
Grey
Blue
Yellow
Green
Orange
White

8
04. Buzzer / Led
The buzzer and LED from the reader are steered by
communication protocol RS485. There is no need to
connect any additional cables.
03.3 FEATURES
Communication: RS485 (L+ &L-)
Connector exit:
> 8 female contacts 28-22 AWG to be crimped (Wurth
Electronik 62400113722DEC)
> Double-row female connector with 8 points (Wurth Electronik
624008213322)

Cable exit: m
Protection: IP65 level without Buzzer connections
03.4 OPERATING TEMPERATURE


9
05. Anti-pullout function
The pullout is detected by an accelerometer.
Once it is detected:
›
VISOR®.



10
NOTE:-
er your proximity scanners, ensure that you connect all

06. Connection of the reader on
a VERSO®+ control unit
+12V (red)
GND (brown)
L+(A) (blue)
L-(B) (yellow)