Velleman CAMSET3 User manual

*(%58,.6$$1:,-=,1*
9225%(',(1,1*(1,167$//$7,(
0$18(/
'87,/,6$7,21(7',167$//$7,21
&$06(7
,16758&7,210$18$/
)2523(5$7,21$1',167$//$7,21
%(',(181*6$1/(,781*
)85%(',(181*81',167$//$7,21

CAMSET3 GB
1
INTRODUCTIONS
This video doorphone CAMSET3 system consists of one indoor monitor unit
and one outdoor camera unit, with which you can see a visitor and converse
with them from inside your home, without opening your entrance door.
For proper usage and application of the system, please read the instruction
manual.
CONTENTS
1. Configuration and parts
2. Functional nomenclature
a) Indoor monitor
b) Outdoor monitor
3. How to install
a) Installation method of indoor monitor
b) Installation method of outdoor camera
c) Viewing angle control method of outdoor camera
4. How to connect wires
5. How to operate
6. Optional outdoor camera
7. Trouble shooting
8. Care and maintenance

CAMSET3 GB
2
1. CONFIGURATION OF BOXED UNITS AND PARTS
WALL-BRACKET
FOR MONITOR
MONITOR
PHONE HANDSET
OPTIONAL CAMERA
CAM5
CAM6
AC/DC
ADAPTER
TAPPING SCREWS
(Ø 4 x 20mm)
MACHINE SCREWS
(Ø 3 x 30mm)

CAMSET3 GB
3
2. FUNCTIONAL
NOMENCLATURE
a) Indoor monitor unit
(1) Phone hand set
Use it to communicate with the visitor outside.
(2) Monitor
The visitor appears through outdoor camera lens.
(3) Desk stand
(4) Volume control
Controls call signal volume and voice volume from outside.
(5) Contrast control
Rotate the knob to adjust picture contrast.
(6) Brightness control
Rotate the knob to adjust picture brightness.
(7) Power lamp
Lamp is on when monitor is working.
(8) Monitor- on/off button
Press the monitor- on button to see who is outside without lifting
handset.
(9) Door release button
Press the button to release door (Where a door lock release system
is installed)
(10) Speaker
For chime call, burglar alarm and voice.
DETAIL “A”
* In case of * In case of
Wall-mount use Desk-top use

CAMSET3 GB
4
b) Outdoor (CAM6) (included)
(1) CCD camera lens
Automatic IRIS
(2) Infrared LED.
Built-in infrared LED allows you to identify the visitors in poorly lit
areas.
(3) Speaker
Sound through speaker from indoor unit.
(4) Call button
As soon as the visitor presses the call button, the picture will appear
on the indoor monitor and the indoor chime will be activated.
(5) Microphone
Use to talk with indoor monitor.

CAMSET3 GB
5
3. HOW TO INSTALL
a) Installation method of indoor monitor unit ?
(1) Connect two lead wires to backside terminals of indoor monitor unit
in line with connection system.
(2) Mount the wall- bracket with two screws provided.
(3) Fix the indoor monitor unit into the wall- bracket.
(4) If deskstanding is preferred instead of wall mounting, use the fold-
out stand attached to the rear of indoor monitor unit.

CAMSET3 GB
6
(5) Connect the power transformer in line with fig (A).
Stand
Adapter

CAMSET3 GB
7
b) How to install outdoor camera CAM6
(1) Take the base panel (2) out of the camera and fix it firmly on the wall
(3) by using tapping screws.
(2) Connect lead wires to the terminals as shown in the wiring diagram.
(3) Re-attach the camera (1) to the base panel and fasten it with one
machine screw.

CAMSET3 GB
8
4. HOW TO CONNECT WIRES
(1) Be careful not to reverse the polarity positive (+) and negative (-)
between outdoor camera unit and indoor monitor. See #1 for right
connection.
(2) Two wires are required to connect outdoor camera unit and indoor
monitor unit.
* NOTE : Door lock is not supplied by manufacturer.
CONNECTION SYSTEM FOR VIDEO DOORPHONE (# 1)
INDOOR
OUTDOOR
DOOR LOCK
DC 12V
0.5 Amp. MAX.
POWER TRANSFORMER
FOR VIDEO DOORPHONE
DC 17V 1.0A

CAMSET3 GB
9
5. HOW TO OPERATE
1) Activation of units
(1) When the call button of the outside camera is pressed, the indoor
units’ chime rings and the visitor’s picture will appear on the indoor
unit’s monitor.
(2) After the visitor is visually identified, and you wish to converse with
the visitor, lift the handset and converse. The unit will remain
activated for approximately 150 seconds before it automatically
shuts off. To re- activate for continued conversation push the
“monitor on” button.
2) Activation of outside unit from inside unit
(1) Press the monitor- on button of the indoor unit at any time and the
outdoor camera will be activated and show as outside view.
3) Working time
(1) Call time: approximately 30 seconds
The picture terminates automatically if indoor unit is not answered
within approximately 30 seconds after the call button of the outdoor
camera is pressed.
(2) Talk time: approximately 150 seconds
When the indoor monitor unit is called by the outdoor unit and the
indoor monitor handset is picked up, there is approximately 150
seconds of time available before the unit automatically shuts off.
(3) Monitor time : approximately 30 seconds
When outside camera is activated from inside, there is
approximately 30 seconds of viewing time before unit automatically
shuts off.
4) Door open function
(1) With separate purchase of electric DC door lock system, indoor unit
can be wired to activate door open.
5) Installation location
(1) Care must be take when selecting a site to install the outdoor
camera unit. Damage could result from a site that exposes the
outside unit to direct rainfall, strong vibrations or excessive dust. For
optimum video display, unit should also be protected from direct
sunlight. Inferior picture quality can also occur, should the lens cover
become scratched.

CAMSET3 GB
10
6. OPTIONAL OUTDOOR CAMERA CAM5
a) Functional nomenclature
(1) CCD camera lens
Automatic IRIS.
(2) Infrared LED
Built- in infrared LED allows you to identify the visitors in poorly lit
areas.
(3) Speaker
Sound through speaker from indoor unit.
(4) Name plate
(5) Call button
As soon as the visitor presses the call button, the picture will appear
on the indoor monitor and the indoor chime will be activated.
(6) Microphone
Use to talk with indoor monitor.

CAMSET3 GB
11
b) How to install the camera
(1) Mount the wall- bracket (3) firmly into the recessed mounting bracket
(4) by using tapping screws (∅4 x 20mm).
(2) Connect lead wires to terminals in line with wiring diagram.
(3) Fix the camera (2) into the wall- bracket by using machine screws
(∅3 x 22mm)
(4) Cover the front cabinet (1) on the camera and fix it by using tapping
screws (∅4 x 10mm)
NOTE : The recessed mounting bracket (4) is not supplied by manufacturer.

CAMSET3 GB
12
Viewing angle control
(1) Open the camera box.
(2) When vertical adjustment is required, use the control lever up and
down.
(3) For horizontal adjustment, use the central screw left and right.
A
SCREW
DETAIL “A”
CROSS SCREWDRIVER
CENTRAL SCREW
CONTROL LEVER

CAMSET3 GB
13
c) How to connect wires
(1) Be careful not to reverse the polarity positive (+) and negative (-)
between outdoor camera unit and indoor monitor unit. (See #1 for
right connection)
(2) Two wires are required to connect outdoor camera and indoor
monitor.
(3) Where the door lock is installed, the additional two wires are
required for connecting the door lock to the monitor.
* NOTE: Manufacturer does not supply door lock.
CONNECTION SYSTEM FOR VIDEO DOORPHONE (#2)
INDOOR
OUTDOOR
DOOR LOCK
DC 12V
0.5 Amp. MAX.
AC
/
DC ADAPTER
DC 17V 1.0A

CAMSET3 GB
14
7. TROUBLE SHOOTING
PROBLEM CHECK POINT
Power supply not working
(Power lamp not on)
Is the jack firmly inserted to
indoor monitor unit?
Camera or monitor not working Is the installation wire of camera
unit, indoor monitor or DC power
supply firmly connected?
Is the polarity of wires matched
between outdoor camera unit
and indoor monitor properly?
Volume is too low on calling tone Adjust the volume knob.
Monitor picture too dark Adjust the contrast and/ or
brightness
No picture on monitor Increase the brightness
Interphone not work Is the modular jack from handset
firmly inserted to indoor monitor?
Note : Use the system with AC/DC adapter supplied by the original
manufacturer.

CAMSET3 GB
15
8. CARE AND MAINTENANCE
Keep it dry. If water should get on it, wipe it off
immediately. Water contains minerals that can corrode
electronic circuits.
Do not store in hot or cold areas. Extreme hot or cold
temperatures can shorten the life of electronic devices
and can even distort or melt certain plastics or may
cause improper working.
Dropping can result in failure to operate. Circuits boards
can crack and cases may not survive the impact.
Do not use or store in areas of high levels of dirt of dust.
The electronics may be contaminated. Any moving parts
will wear prematurely.
Do not use harsh chemicals, cleaning solvents or strong
detergents to keep your unit looking new. You need only
wipe it with a dampened cloth from time to time.