VENCO VC 416 Operating instructions

416274
-
9-19-97
9-10-98
TABLE OF CONTENTS
VC 416 / 516 SUPERCEDES
TITLE DATE SECTION
TABLE OF CONTENTS
VC 416 / 516 MANUAL
PAGE DESCRIPTION REF.NO.
1 IMPORTANTWARNING ............................................................................. 416272
2 BODYPROPANDWARNING/CAUTIONDECALS .....................................416288
3 DECALLOCATIONS .................................................................................. 416128
4 VC416CAPACITIES.................................................................................. 416266
5 VC516CAPACITIES.................................................................................. 516203
6 MOUNTINGDIMENSIONS .......................................................................... 416286
7 STANDARDHOIST(WITHOUTSUBFRAME)MOUNTINGINSTRUCTIONS ..... 416289
8 STANDARDHOIST(WITHOUTSUBFRAME)MOUNTINGINSTRUCTIONS ..... 416290
9 STANDARDHOIST(WITHOUTSUBFRAME)MOUNTINGINSTRUCTIONS ..... 416291
10 SUBFRAMEHOISTMOUNTINGINSTRUCTIONS .........................................416292
11 SUBFRAMEHOISTMOUNTINGINSTRUCTIONS .........................................416293
12 SUBFRAMEMOUNTINGINSTRUCTIONS .................................................... 416257
13 2PIECESUBFRAMEASSEMBLYANDMOUNTINGINSTRUCTIONS ...........416281
14 SUBFRAMEHOISTMOUNTINGINSTRUCTIONS .........................................416294
15 SUBFRAMEHOISTMOUNTINGINSTRUCTIONS .........................................416295
16 PTOPUMPINSTALLATION ........................................................................ 416296
17 PTOPUMPINSTALLATION ........................................................................ 416297
18 PTOCABLEOPERATION .......................................................................... 520078
19 SPLITPUMPPTO...................................................................................... 416138
20 ELECTRICPOWERUNITINSTALLATION-ES&ED ....................................416298
21 FENNEREDPOWERUNIT(416081)INSTALLATION ...................................416080
22 MONARCHEDPOWERUNIT(416081M)INSTALLATION .............................416306
23 ESPOWERUNITINSTALLATION ............................................................... 416299
24 FENNERESPOWERUNIT(40058)INSTALLATION .....................................6133B
25 FILLINGRESERVOIR-ES & ED ................................................................ 416140
26 REARHINGEANDUPPERPIVOTSINSTALLATION ....................................416300
27 LIFTINGANGLEINSTALLATION ................................................................. 416273
28 PTOPUMPOPERATION............................................................................ 416301
29 ED&ESPOWERUNITOPERATION .......................................................... 416302
30 BODYPROP(S)OPERATION ..................................................................... 416303
31 SERVICE&MAINTENANCE ...................................................................... 416304
32 REPLACEMENTPARTSDRAWING(PAGE1) ............................................416255A
33 REPLACEMENTPARTSDRAWING(PAGE2) ............................................416255B
34 REPLACEMENTPARTSLIST ..................................................................... 416256
35 REPLACEMENTPARTSDRAWING&LIST(416081EDPOWERUNIT) ........ 416081
36 REPLACEMENTPARTSDRAWING(416081MEDPOWERUNIT) ................ 416508
37 REPLACEMENTPARTSLIST(416081MEDPOWERUNIT) .........................416509
38 REPLACEMENTPARTSDRAWING&LIST(40058ESPOWERUNIT) .......... 40058-2
39 WARRANTYPOLICY ................................................................................. 12-00073
-PDECALSANDPACKAGEINCLUDES:
12524 CAUTIONSTANDCLEAR 2 PCS.
416052 CAUTIONDECAL 2 PCS.
416084 SAFETYPROP DECAL 1 PC.
6066 PLASTICBAG 1 PC.
12-00075 ENVELOPE 1 PC.
MANUFACTURING,INC.
BOOKMARKS
THUMBNAILS

TITLE SECTION
SUPERCEDES
DATE
416272
H100
10-9-92
7-14-98IMPORTANT WARNING
VC 416/516
MANUFACTURING,INC.

416288
H100
-
7-14-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
C. Body Props
One (1) body prop shall be furnished as a standard item on Venco hoists. Federal
regulations require that hoists used for construction bodies require two (2) body
props, and hoists used on truck beds over 15 feet should have two (2) body props:
A. If additional body props are required, please designate on your purchase
order, or contact our sales office.
Warning and Caution Decals
Included with your Venco hoist are two (2) sets of warning and caution decals.
These decals should be placed in a visible location on each side of the truck
body (roadside and curbside) so they are easily seen and readily identifiable.
See drawing no. 416128 for locations.
The manufacturer recommends that the VC416/516 hoist system be installed by an
authorized distributor of Venco products. No responsibility is assumed or
implied as to the integrity of any Venco product not furnished, supplied and
installed by an authorized distributor.
MANUFACTURING,INC.
I

416128 H100
7-13-98A
12-27-99B
DECAL LOCATION VC 416/516, VC 520 - 6628 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.
Included with your Venco hoist are two (2) sets of warning and caution decals. These decals should be placed in a prominent location on each side of the truck body (roadside and curbside) so they are easily seen and readily identifiable.

TITLE SECTION
SUPERCEDES
DATE
416266
H100
2-28-90
7-14-98CAPACITY CHART
VC 416
MANUFACTURING,INC.

TITLE SECTION
SUPERCEDES
DATE
516203
H100
2-28-90
7-14-98CAPACITY CHART
VC 516
MANUFACTURING,INC.

TITLE SECTION
SUPERCEDES
DATE
416289
H200
-
7-14-98INST INSTRUCTIONS
VC 416/516
MANUFACTURING,INC.

416290
H200
-
7-14-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
3. Refer to figures 1 and 2.
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
If a distance of more than 38" is exceeded between the centers ofIf a distance of more than 38" is exceeded between the centers of
If a distance of more than 38" is exceeded between the centers ofIf a distance of more than 38" is exceeded between the centers of
If a distance of more than 38" is exceeded between the centers of
the rear axle and rear hinge assembly, additional reinforcementthe rear axle and rear hinge assembly, additional reinforcement
the rear axle and rear hinge assembly, additional reinforcementthe rear axle and rear hinge assembly, additional reinforcement
the rear axle and rear hinge assembly, additional reinforcement
of the truck frame will be required.of the truck frame will be required.
of the truck frame will be required.of the truck frame will be required.
of the truck frame will be required.
a. Mark the location for the rear hinge. This location should be immediately
behind a truck crossmember. The hole center of the rear pivot angle should
not be more than 6" rearward of the rear spring hanger.
b. See Figure 2, cut a 90° cut-out in the truck frame (both sides).
c. Position the angle iron frame of the rear hinge assembly in the truck frame
cut-outs. Make sure the rear pivot angle assembly is properly positioned on
the truck frame. Weld all around truck frame and hinge assembly joint.
MANUFACTURING,INC.

416291
H200
-
7-14-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.

416292
H200
-
7-14-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.

416293
H200
7-14-98
9-12-02A
INST INSTRUCTIONS
VC 416/516
SUPERCEDES
TITLE DATE SECTION
MANUFACTURING, INC.
Channel W/ Power Unit Mtg. Bracket
416506

416257 H200
2-14-01B 6-22-01C
SUBFRAME MOUNTING VC 416/516 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.

416294
H200
-
7-14-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.

416295
H200
-
7-15-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.

416296
H200
-
7-15-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.

416297
H200
-
7-15-98
INST INSTRUCTIONS
VC 416/516 SUPERCEDES
TITLE DATE SECTION
MANUFACTURING,INC.