Venstar 640 User manual

VENSTAR
VENSTAR64O
User Manual

Table of Contents
1 OVERVIEW
1.1 Appearance and Keys
t,2 Basic Operation
1.2,1 Switch On
1.2.2 Unlockthescreen
1.2.3 Lockthe screen
1.2.4 Switch Off
1.2.5 Batterycharging
1.2.6 Switch input methods
1.2.7 UseTF-Card
1.2.8 Connectedtothecomputer
1.2.9 Browsethefile inthe device
1.2.10 Startup programs
1.2.11 Close programs
1.2.12 Screen operation
1.2.13 Home screen
1.2.14 Screen gestures
,..2.15 Security setting
1.2.16 Displaysetting
1.2.17 HDMI setting
1.2.18 Wireless And Network Settings
1.3 Technicalspecifications
Thanks very much for purchasing our MID product! Before using this product,
please read the manual carefully. We will consider that you have read this manual
when you use this product
The functions information of this manual is subject to the product itself; we will
keep developing new functions. The information in this manual is subject to
change without any prior notice
The Company will not be responsible for any loss of personal data and damage
caused by incorrect operation of software/Hardware, artificial damages,
replacement of batteries or any other accident. To avoid loss of your data, please
backup your data to your computer at any time.
We cannot control any dispute from users' misunderstanding or incorrect
operation against the manual, the Company will not take any relevant
responsibility for any accidental loss potentially occurring in the process of using
this manual.
Please do not repair it by yourself, otherwise, we will not provide you with
after-sale service. Preface
Dear Customers,
Thanks very much for purchasing our product! This device is built-in hiSh
performance wifi receiver module, supporting external 3G USB-DONGLE wireless
network card, turning on the broadband wireless networks, breaking through the
restraint of network cable; it will bring you into the portable media player world
and fulfill your entertainment needs. lt also support picture browsing, E-book
Reader, games, online chat and other functions, various settings will fully show
your individuality. Safety Notices
Please do not let the player fall or rub or compact with hard objects during using,
or it may cause surface scratch of the player, battery loose, data lose or damages
of other hardware.
Never let this product expose to the humid environment or rain as the water
leaked into may disable it to the extent beyond maintenance.
You are recommended not to use the headset with large volume continuously,
please adjust the volume to the size of appropriate security and control the using
time to avoid the damage to your hearing, as excessive volume will cause
permanent hearing damage.
Please do not cut off the power abruptly during software update and download, or
it may cause date loss and system error.
Please don't turn on the device where the wireless equipment is forbidden or
when the usage of the device will cause interference and danger. Please obserue
any relevant restrictions,
Please use original accessories and batteries, do not use incompatible products.
Please don't use the devlce in gas station or nearby the fuel and chemicals.
Please don't use this product when you are driving or walking in the street, or it
may cause an accident.
Please do not scrape the TFT screen, it may be damaged and can not be display
anything.
Never clean the device with any chemicals and detergent, or it will damage the
product surface and corrode the spray paint.
3

Packing List
No Components Ouantitv
1MID Device 1
2USB Cable 7
User Manual 1
4Adapter 1
5Warranty Card L
Attention: Accessories are subject to the real products and change without notice.
l Overview
l.lAppearance and Keys
72
1.2.1 Switch On
When the devite is in the OFF mode, press and hold "power" key for 3 seconds to
enter the Android startup progress bar, then you can enter to the system desktop
1.2.2 Unlock the screen
1.2.3 Lock the screen
When the device is in the ON mode, press the "POWER" key shortly, the system
will lock the screen and enter the save power mode. Then the screen is OFF but
the system will still operational.
1.2.4 Switch Off
When the device is in the ON mode, press and hold the "POWER" key for 3
seconds, the screen will display the power off interface, choose the power off item
to confirm, the system will shut automatically.
1.2.5 Battery Charging
lnsert the micro port of the battery adapter into 22OV AC slot on the device, and
connect the other side with the power socket. Then, you can charge the device.
INote] This device is not recommended to use USB interface to charge, please
must use the special power adapter for charging. You should charge the battery for
at least 8-12 hours to make sure the battery is fully charged at the first time. On
charge the Power indicating lamp of the device is in high light blue color, the
desktop icon of the U.tt"ry E keep rollingwhich shows it is connected tothe
device.
*flil n@
Please press and drag the E icon to the El then the LcD will unlocked
5
7
I
0
3
I!
1.2 Basic Operation
Svmbol Name Description
1Volume+/Volume-
Press the left side of the key shortly is increase volume
function
Press the right side of the key shortly is reduce volume
function
2Power Press shortly to enter sleeping/waking up mode, press
lone to switch ON/OFF
3Front Camera 0.3Megapixel Camera
4Headset Headset
5ESC ESC key
6 Home Home kev
7Menu Menu key
8Micro USB port Connect with PC
9Charger Port To avoid damaging, recommend use of the special
chargine eouioment
10 speaker Built-in Speaker
77 Back Camera 5.0 Megapixel Camera

1.2.6 Switch lnput Methods
handwriting, number, letter, pinyin etc. switching follow:
INoted] After newly install input method, you should "Settings>Language &
input>KEYBOARD & INPUT METHODS", then you can use.
1.2.7 Use T-Flash Card
lnsert T-FLASH card
lnsert the T-Flash card into the slot in direction of the device's bottom shell until
you hear a sound of click.
Browse files in the memory card
ln this MID device, you can view and use the needed files in catalogue of
"MENlJ">"File manage/'> "SD Card".
1) Remove T-Flash card
Close all open files from the T Flash, then enter into "MANU>"SETTINGS">"TF card
and & device storage", click "Unmount SD card", System will prompt that TF card
was removed safely. Tap with your fingertips to the pop-up T-Flash Card.
lNote] Do not insert the T-FLASH card by force; this card can only be applied in one
direction
2) Do not removetheTFcard before Unmounted it, orthe card maybe
damaged.
3) lfthe memory card is write-protected, data will not be formatted and
written, please remove the write protection before such operations.
4) Major brands memory card is recommended to avoid the card is not
. compatible to this device.
1.2.8 Connected tothe Computer
One end the data line connect to the computer, the other end connect the USB
port of the device, select "Settings > Developer options > USB debugging", the
device will connect with computer, and you can copy files to the device.
1.2,9 Browse the file in the device
click " File Manager" @, yo, ."n ,"" the files in the device.
- L.,SB storaoe
! avaralies.:du
Toraisa*t.3Gs
1.2.10 Startup Programs
Click all the application icon you want to start and it can switch on.
1.2.11 Close Programs
Press the iconl continuousty or the "ESC" key, the device will close the active
program. You can also use the corresponding function in the management
currently running applications to close the program
1.2.12 Screen Operation
4.Zoom in and zoom out: ln applications which support zoom gestures, such as
photo, lE browser, mail and map etc. you can zoom in or out the screen contents
bv opening or closing your two fingers.
5. Rolling: ln applications which support rolling gestures, such as photo, lE browser,
mail and map etc. you can scroll the screen contents by sliding your fingers on the
screen. lf you want to stop the rolling screen, you just need to touch it.
1,2.13Home Screen
1) Switch home screen
ln the home state, you can change the home interface by sliding your fingers on
the screen quickly.
2) Custom Home screen
Press the blank area on the home screen interface for a few seconds, it will appear
"Choose wallpaper from" menu, then you can set the home screen.

3) Move application icons in screen
Press the icons of applications you need to move for several seconds, it will enter
into the moving model (the icon of application will be turn big), then drag the icon
to desired position directly.
4) Move application icons screen to screen
Press the icons of applications you need to move for several seconds, and you can
drag the icon to the left side or right side.
5) Delete applications
Press the icon of application you need to remove for several seconds, drag the icon
to "x" (when the icon was turn big, the bottom of screen will appear "x", then you
can delete the application.
1.2.14Screen Gestures
1) click
When you need to input by the on-screen keyboard, you just need to se ect
applications or press the button on the screen, then click the items..
2) Press
When you want to start the available options of a project(such as web page link),
you only need to press the project.
3) slide
Sliding on the interface with your fingers to make vertical or horizontal dragging
action
4) Drag
Before you start dragBing, you must press the items with your fingers, and can not
let fingers leave the screen before dragging to the desired position
5) Rotation
Changing the screen orientation by rotating the device laterally.
1.2.15 Security
You can set the unlock pattern, each time you open or wake your MID device, you
must draw pattern to unlock the screen. ln "Settings>Security>Screen lock", it
support many unlock ways. "Slide,Face Unlock,Pattern,PlN,Password".
lf use the "pattern", as below:
A) You must ensure the four-point connection when you draw the unlock pattern
C) click "confirm" to complete unlock pattern designing.
9
B) Click "Continue" and draw