® BHROOM HEER
N5876
Heater Unit,
N --
L
Read and save these instructions! Please take this card as hole cuing template 470mm x 320mm.
>22omm d 1 'h
1■"l \11
\ '
Read and save these instructions! Please take this card as hole cutting template 470mm x 320mm.
® BHROOM HEER
N5876
Heater Unit,
N --
L
Read and save these instructions! Please take this card as hole cuing template 470mm x 320mm.
>22omm d 1 'h
1■"l \11
\ '
Read and save these instructions! Please take this card as hole cutting template 470mm x 320mm.
® BHROOM HEER
N5876
Heater Unit,
N --
L
Read and save these instructions! Please take this card as hole cuing template 470mm x 320mm.
>22omm d 1 'h
1■"l \11
\ '
Read and save these instructions! Please take this card as hole cutting template 470mm x 320mm.
BY VENTAIR PTY LTD
CAPRI PREMIUM HEAT, LIGHT AND EXHAUST 3 1
in
MRPQWH/BL
Plaster xing clips
Position unit into the cutout hole,
and mark the hole positions with
a pencil. Put the unit aside.
Carefully insert unit into cutout, make
sure all holes are aligned with xing
clip holes. Fix with the screws provided
ensuring the screws are inserted
vertically so they engage with the
backside of the xing clip.
Longer side of
clip goes into the
ceiling area as
shown.
Slide clips into place
ensuring the holes line
up with the pre-marked
hole centres
8 pieces
1. 2. 3. 4.
