Vents-us VKOM 150 User manual

MIU_19EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
INDUSTRIAL ELECTRIC AXIAL FANS
VKOM 150
VKOM 200
VKOM 250
VKOM 315
INSTALLATION GUIDE
INSTALLATION
Tools required
Pencil Drill
(Ø 8 mm for VKOM 150,200,250)
(Ø 10mm for VKOM 315)
Screwdriver Dowel
(NTS 8/50 for VKOM 150,200,250)
(NTS 10/60 VKOM 315)
Screws
(5,0x50 mm
for VKOM 150,200,250)
(8,0x60 mm for VKOM 315)

MIU_19EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
The VKOM fans are installed into air duct by means of an RM reducer which enables joining different diameter ducts. Once done, the assembly is secured with clamps. The VKOM
delivery package includes mounting brackets for attaching the units to a wall. The power is supplied via the remote-position terminal box.
1) Disconnect the fan from power supply.
2) Deinstall the xing brackets.
3) Mark holes on the wall.
4) Drill the holes and insert the expansion anschors.
5) Fix the fan.
6) Connect air ducts
1 2 3
4
6
5
The fan must be connected using durable, insulated and heat-resistant cables and wires. The external lead-in must be equipped with a QF automatic circuit breaker
with a with magnetic trip built into the stationary wiring capable of disconnecting all the phases. The location of the QF external circuit breaker must ensure free
access for quick shutdown of the fan. The protection trip current must be consistent with the current consumption of the fan. The fans are connected to the power
mains in accordance with the applicable wiring diagram.
Connection fans with single-phase motors to AC mains
L
N
X1
1
2
3
N
L
QF
PE
~120 V
50/60 Hz

MIU_19EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
1) Disconnect the fan from power supply.
2) Remove the cover from the terminal block. Remove the cable clamp.
3) Connect the cables according to the wiring diagram.
4) Install the terminal block cover
1 2
43

MIU_19EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]