Vents-us VK PS 100 User manual

MIU_14_(VK_PS)EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [e-mail]
INSTALLATION GUIDE
Tools required
Pencil Drill Ø6 mm Screwdriver Dowel 4 pcs NTW 6/35 Screws 4 pcs 4/35
MOUNTING
INLINE CENTRIFUGAL FAN
VK PS 100
VK PS 125
VK PS 150
Installation of the fan with direct air discharge to outside requires a device that prevents air backdraft: backdraft damper, a grille with shutters or a ventilation hood.
Otherwise the fan may be spontaneously turned on by the pressure created by blown in wind from outside.
Typical Fan installation
Lint Trap
VK PS
Install a lint trap between the clothes dryer and the
fan to increase the service life and maintenance
periodicity of VK PS. Clean the lint trap as required.
All manuals and user guides at all-guides.com

MIU_14_(VK_PS)EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [e-mail]
1. Mark fastening holes 2. Drill fastening holes
3. Install the sensor 4. Fix the fan to themounting surface with screws
5. Connect air ducts and silicone tube 6. Connection of the fan
120
VAC, 60 Hz
BREAKER
GREEN
GROUND
SCREW
BREAKER BOX
EARTH
FAN
WALL SOCKET
All manuals and user guides at all-guides.com