Vents-us VKP PS 125 User manual

www.ventsus.com MIU_17_(VKP_PS)-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [email protected]
INSTALLATION GUIDE
Tools required
Pencil Drill
Ø6 mm
Screwdriver Dowel 4 pcs
NTW 6/35
Screws 4 pcs
4/35
MOUNTING
INLINE CENTRIFUGAL FAN
VKP PS 125
Typical Fan installation
Lint Trap
VKP PS
Install a lint trap between the clothes dryer and the fan to increase the service life and maintenance periodicity of VK
PS. Clean the lint trap as required.

www.ventsus.com MIU_17_(VKP_PS)-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [email protected]
The process of fan mounting with the use of a bracket together with four screws and dowels is shown in Fig. 1-4.
1. Mark fastening holes 2. Drill fastening holes
3. Install the casing on the mounting bracket
4. Tighten the screws

www.ventsus.com MIU_17_(VKP_PS)-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [email protected]
The process of ventilation stack installation is shown in Fig. 5-6. Air ow direction should match the direction of an arrowhead placed on the fan case
5. Connect air ducts
6. Fix air ducts with clamps

www.ventsus.com MIU_17_(VKP_PS)-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [email protected]
Fan connection