venture horizon 2641 User manual

SPARTAK ENTERPRISES, INC.
CUBBIE ORGANIZER
Model #2641-
LOT #
IF PARTS ARE MISSING AND OR DEFECTIVE, IF INSTRUCTIONS ARE NOT CLEAR
OR IF YOU ARE EXPERIENCING PROBLEMS ASSEMBLING OUR PRODUCT.
BEFORE YOU RETURN THE PRODUCT TO THE STORE,
PLEASE CALL US TOLL FREE FOR CUSTOMER SERVICE ASSISTANCE
[phone]
OR SEND US EMAIL AT
[email protected]
PLEASE HAVE ITEM NUMBER READY, AND A REPRESENTATIVE WILL GLADLY ASSIST YOU
SPARTAK ENTERPRISES, INC. 841 E. FRANCIS STR. ONTARIO, CA. 91761 TEL; 909/930-0670 FAX; 909/930-9921

A
NOTE: FIRST MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED ON THIS SHEET. IF YOU ARE MISSING ANY PIECE(S), DO NOT
ASSEMBLE THE UNIT. INSTEAD, CALL OUR CUSTOMER SERVICE NUMBER AT: [phone]. WE WILL BE HAPPY TO ASSIST YOU.
2641A-Left Side
2641B-Right Side
2641C-Top
2641D-Bottom
PARTS ARE USUALLY MARKED ON THE RAW EDGE
1pc
1pc
1pc
1pc
2641E-Skirt
2641F-Back Rail
2641G-Horizontal Divider
2641H-Vertical Divider
2641I-Back Panel
1pc
3pcs
4pcs
3pcs
5pcs
B
C
D
E
F
G
H
BP--5
DOWW525
CAMLT12
CAMBT12
HARDWARE PART # DESCRIPTION QTY
SHELF SUPPORT
WOOD DOWEL
CAMLOCK
BOLT
16
24
14
14

1
DOWW525
A & B
Unlocked
Position
CAMBT12
CAMBT12
Unlocked
Position
D
F
E
C

2
Turn camlocks clockwise
until full stop on parts D and
F (slightly over a turn
to lock the bolt)
A
F
E
F
F
D
B
UNFINISHED SIDE

3

4
Turn camlocks clockwise
until full stop on parts A and
B (slightly over a turn
to lock the bolt)
C
BPBL5

5
G
G
G
G
H
H
H
HH
H
Turn the grid upside down to connect the middle dividers

6Make sure all Plastic Shelf Support are sitting in straight and then insert the grid
inside of cabinet with finished edges facing out. Should you have difficulty getting
pass Plastic Shelf Supports -then just lift slightly ends of horizontal dividers G.
YES NO