Venturer PVS1680 User manual

811-168091-031
Printed in China
FOR USA
OWNER'S MANUAL
CD PLAYBACK
1
VIEWER
R
CD-R/RW
Car DVD Theater System

GB - 1
SAFETY PRECAUTIONS
WARNING
Thelightningflashwithanarrowheadsymbol,within
theequilateraltriangle,isintendedtoalerttheuserto
the presence of uninsulated "dangerous voltage"
withintheproduct'senclosurethatmaybeofsufficient
magnitudetocauseanelectricshock.
Theexclamationpointwithintheequilateraltriangleis
intendedtoalerttheusertothepresenceofimportant
operatingandmaintenance(servicing)instructions
inthisownermanual.
WARNING:TOREDUCETHERISKOFELECTRIC
SHOCK,DONOTREMOVECOVER(ORBACK).NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICINGTOQUALIFIEDSERVICEPERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSETHIS
APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENTELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG
TOWIDE SLOT, FULLY INSERT.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, rent copyrighted material
without permission.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098 and 4,907,093 licensed for limited
viewing uses only.
DVD video discs are copy protected, and any recordings made from these discs will be distorted. This product
incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
On Placement
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or
by placing it on carpeting.
FCC Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesirable
operation.
On Safety
• When connecting or disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may
damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the
unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1
to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
WARNING:
• Should any trouble occur, disconnect the AC power cord and refer servicing to a qualified technician.
This product
contains a low
power laser device.
The symbol for
Class II (Double
lnsulation)
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM

GB - 2
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before the appliance is
operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.
6. Carts and Stands - The appliance should be used only with a cart or stand that is
recommended by the manufacturer.
6A.An appliance and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only
as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or position does not interfere with
its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or, placed in a built-in installation, such as a book case
or cabinet, that may impede the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power supply only of the type described in
the operating instructions or as marked on the appliance.
11. Grounding or Polarization - Precautions should be taken so that the grounding or polarization means
of an appliance are not defeated.
12. Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. Cleaning - The appliance should be cleaned
only as recommended by the manufacturer.
14. Power Lines - An outdoor antenna should be
located away from power lines.
15. Outdoor Antenna Grounding - If an outside
antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide
some protection against voltage surges and built
up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure 1.
16. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left
unused for a long period of time.
17. Object and Liquid Entry - Care should be taken so that objects do not fall, and liquids are not spilled,
into the enclosure through openings.
18. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled, into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
19. Servicing - The user should not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.

GB - 3
TABLE OF CONTENTS
Repeat Playback ......................................... 20
Repeatingatitle/chapter(DVD)............................20
Repeatingasingletrack/wholedisc(CD)...........20
Playing MP3 and Picture File Disc......... 21-22
PlayingaMP3filedisc............................................21
PlayingaPicturefiledisc.......................................22
PlayingaMP3/Picturefiledisc...............................22
CustomizingtheFunctionSettings ........23-27
LANGUAGEsetting..................................................23
VIDEOsetting......................................................23-25
AUDIOsetting....................................................25-26
RATINGsetting...................................................26-27
LanguageCodeListforDiscLanguage.......28
Maintenance................................................29
CleaningDisc..........................................................29
CleaningtheUnit...................................................29
ImportantNote.......................................................29
Trouble Shooting Guide ........................ 29-30
SafetyPrecautions..................................1
Important Safety Instruction .............. 2
TableOfContents ................................3
DiscFormats........................................4
Accessories...........................................5
RemoteControl....................................5
Control Reference Guide ................. 6-7
PowerSupply....................................... 8
Using the AC adaptor .................................... 8
Usingthecaradaptor .......................................8
Installation.............................................9
Installingthe unitonto theseat backin acar ... 9
ViewingAngleAdjustment..................................9
WallMounting......................................................9
Turningontheunit..............................................9
Connections...................................10-12
Using thisunitwithotherequipment .........10-11
Using Headphones ..........................................12
Playing a Disc ............................... 13-15
PlayingDisc........................................................13
Pausingplayback(stillmode).........................13
Stoppingplayback............................................13
Toskiptoadifferenttrack................................13
FastFoward/FastReverse...............................14
Skip(Forward/Reverse)....................................14
Zoomingintoan image ...................................14
Angleselection.................................................15
Audioselection.................................................15
Subtitleselection..............................................15
Special Functions .............................. 16-18
Displayfunction..............................................16
Locatingaspecifictitle ...................................17
Locatingaspecifictitle/chapter/track............17
Locatingaspecifictime...................................18
Anglesetting....................................................18
Audiosetting....................................................18
Subtitlesetting.................................................18
CD / DVD programmable memory ............ 19
Programmablememory(DVD).........................19
Programmablememory(CD)............................19

GB - 4
The unit can playback.
Region Management Information
RegionManagementInformation:ThisunitisdesignedandmanufacturedtorespondtotheRegionManagement
Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond
to the Region number of this unit, this unit cannot play that disc.
The region number of this unit is 1.
Disc Function or Operation that is Not Available
Whenthe symbolappearsonthe screen,itindicatesthatthefunctionoroperationattemptedisnotavailable
at that time. This occurs because the DVD disc manufacturer determines the specific functions. Certain
functions may not be available on some discs. Be sure to read the documentation provided with the DVD.
1
T
Chapter 1 Chapter 1Chapter 2 Chapter 2Chapter 3
DVDs
[8cm/12cm disc]
Notes on Unauthorized Discs
You may not be able to play back some DVD discs on this unit if they were purchased from outside your
geographic area or made for business purposes.
Title, Chapter and Tracks
• DVDs are divided into “titles” and “chapters”. If the
disc has more than one movie on it, each movie would
be aseparate “title”.“Chapters”aresectionsoftitles.
• Audio CDs are divided into “tracks”. A “track” is
usually one song on an Audio CD.
Note :
• Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on them,
but some do not.
Track 1 Track 2 Track 3 Track 4 Track 5
Icons Used on DVDs
Sample lcons Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
2
2
2
1. English
2. French
1. English
2. French
Notes:
• ThisUnitsupports2-channel (L/R) audio and 5.1ch(Multi-channel)MPEG Audio 1/2 (onlywhen the DIGITAL
AUDIO OUT coaxial jack is used for connection). It does not support 7.1 channel MPEG Audio Version 2.0.
• When playing back a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic
images will not be shown.
DISC FORMATS
Compatible
Audio CDs
[8cm/12cm disc]

GB - 5
To Change Remote Battery
1. Open the battery door.
Battery Replacement
When battery become weak, the operating distance of the Remote Control is greatly reduced and you will need
to replace the battery.
Notes:
• If the Remote Control is not going to be used for a long time, remove the battery to avoid damage caused
by battery leakage corrosion.
• WARNING: Do not dispose of battery in fire, battery may explode or leak.
2. Insert new one CR2025 (3V) size battery.
Using the Remote Control
• Point the Remote Control at the REMOTE SENSOR "IR" located on the unit.
• When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR "IR" may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
REMOTE CONTROL
ACCESSORIES
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for replacement parts.
• To order accessories contact 1-800-252-6123 or web site (http://www.18002526123.com)
Remote control (battery included) (043-R13232-020) ..................................................... x 1
AC adaptor (133-011202-000) .......................................................................................... x 1
AC power cord (134-A13211-216) .................................................................................... x 1
12Vcarplugadaptor(133-030627-001)............................................................................x1
Screw for wall mounting .................................................................................................... x 2
ShortStrap(802-168098-000)...........................................................................................x1
LongStrap(802-168098-001)............................................................................................x1
ATTENTION
Take out the PVC sheet before operating the remote control.

GB - 6
CONTROL REFERENCE GUIDE
Remote Control
1) ZOOMbutton
Zoom into an image of a DVD.
TV MODE button
In stop mode, select whether to output the
video signal. TV shows "AUTO" which means
output signal depends on DVD disc (either
NTSC or PAL). TV shows "PAL" or "NTSC"
which means output signal fixed to PAL or
NTSC.
2) STOP button
Stop playing a disc.
PLAY button
Press to start or resume playback a disc.
PAUSE button
Pause playback, frame advance.
3) PREV button
Move reverse through titles, chapters or tracks
on a disc.
4) / SEARCH buttons
SEARCH:Fast reverse playback.
SEARCH:Fast forward playback.
5) Number (0 - 9) buttons
Use when creating programs, and entering a
parental level password. To select a CD/MP3
track directly.
6) MEM button
In stop mode, enter the number of a selected
chapter or track.
ANGLE button
During DVD playing, switch the camera angle
of the video presentation when scenes with
multiple camera angles are recorded on a
DVD.
7) VOL -, VOL +(VOLUME +/-) button
Adjust the volume.
8) MENU button
Open and close DVD's menu.
9) NEXT button
Moveforwardthroughtitles,chaptersor trackson
a disc.
10) CURSOR ( , , , ) buttons
Use to highlight selections on a menu screen and
make adjust certain settings.
ENTERbutton
Confirm selections on a menu screen.
11) AUDIObutton
Selectoneof the audio soundtracks programmed
on a DVD or selects the audio output mode on a
AUDIO CD.
12) SUBTITLE/RETURN button
.....
Selectone of thesubtitlelanguages programmed
on a DVD.
Return to the normal operation after using the
SETUP menu of a DVD.
13)GOTObutton
Skip directly to a specific location on a DVD disc.
14) DISPLAY button
Change disc status information displayed on the
screen.
15) SETUP/REPbutton
In stop mode, open and close the SETUP menu
screen of a DVD.
Repeat chapter or title of a DVD.
Repeat single track or whole CD.

GB - 7
Unit
CONTROL REFERENCE GUIDE
1) VOLUMEcontrol
Adjustthevolume.
2) SCREENswitch
4: 3 -- Pan Scan.
16:9--Wide-screen.
OFF -- Turn off the screen.
3) COLOUR control
Adjustforcolourintensity.
4) BRIGHTNESScontrol
Adjusttherelativelightnessordarknessofthecolour.
5) Handle
6) CURSOR ( , , , ) button
Use to highlight selections on a menu screen and
makeadjustcertainsettings.
ENTER button
Confirmselectionsonamenuscreen.
7) PLAY button
Press to start or resume playback a disc.
8) STOP button
Stopplayingadisc.
9) PAUSEbutton
Presstopauseplaybackofdisc.Eachtimeyoupress
thePAUSEbuttonthepictureadvancesoneframe.
PressthePLAY button toresumeplayback.
10) NEXT button
Press NEXTbuttontoadvancetotitles,chapters
/ tracks.
11) PREV button
Press PREVbuttontogobacktoprevioustitles,
chapters /tracks.
12) ZOOM button
ZoomintoanimageofaDVD.
13) MENU button
Open and close DVD's menu.
14) AUDIO button
Selectoneoftheaudiosoundtracksprogrammedon
DVD.
15) Headphonejack
16) POWER ON / STANDBY switch
17) Remotesensor"IR"
Receivetheremotecontrolunitsignals.
18) STANDBY indicator
WhenPOWERON/STANDBYswitchin
STANDBYmode,thelightwillilluminate.
19) DiscDoor
20) Disc Door lock
Pushingtheleftsidecornerofthediscdoortoopen
or close the disc door.
21) DVD / AV IN switch
SlideuptoDVDmode.SlidedowntoAVINmode.
22) AUDIO IN jacks
23) VIDEOINjack
24) DIGITAL AUDIO OUT jack
25) AUDIO OUT jacks
26) VIDEO OUT jack
27) Headphonejack
28) DC IN 12V jack

GB - 8
Cautions:
• Use this unit only with the included 12V car plug adaptor, use with other car adaptor could damage the unit.
• The included 12V car plug adaptor are for use with this unit only. Do not use them with other equipment.
• In the interests of the traffic safety, do not perform operations on the unit or view video software while driving
a vehicle.
• Make sure the unit is fastened correctly to prevent from falling in the vehicle in the event of an accident.
• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot
due to poor contact. Be sure to clean the cigarette lighter socket before use.
• After use, disconnect the 12V car plug adaptor from both the unit and cigarette lighter socket.
1
To DC IN 12V jack
2
Tothecigarette lighter socket
12V car plug adaptor
Left side of unit
POWER SUPPLY
Using the AC adaptor
This AC adaptor operates on AC between 100V and 240V, but
• In the U.S.A. and Canada, the AC power supply cord must be connected to a 120V AC power supply only.
• When connecting to an AC supply outside of the U.S.A. and Canada, use a plug adaptor to suit the AC outlet
configuration.
Using the car adaptor
The included 12V car plug adaptor is designed for use with vehicles that have a 12V, negative ground
electrical system.
Cautions:
• The included AC power supply cord and AC adaptor are for use with this unit only. Do not use them with other
equipment.
•To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
• When the unit is not going to be used for long time, disconnect the AC power supply cord from the AC outlet.
Left side of unit
Power
indicator
ACadaptor
ACpowercord
3
To AC outlet
2
To AC adaptor 1
To DC IN 12V jack

GB - 9
INSTALLATION
Turning on the unit
1. Set POWER ON/STANDBY switch to POWER ON.
2. Set the DVD/AV IN switch to select the desired function.
• If you select DVD the DVD logo (start-up picture) will appear on unit screen.
Viewing Angle Adjustment
The unit is designed to allow users to have a comfortable viewing angle.
The viewing angle can be adjusted as top -12°~ +12°.
• Push screen frame to adjust viewing angle.
Caution:
• Donotforcethe screen frame overitsmaximumviewinganglesettings
as stated above. Attempting this will result in damaging the unit.
1
Wall Mounting
1. Mark the correct mounting position on the wall, use attached the
template sheet for wall mounting.
2. Insert a fixing screw(s) at the marked position on the wall.
3. Align the slot hole(s) of the unit over the screw and pull the unit
downward until it is firmly hooked.
Installing the unit onto the seat back in a car
The unit is designed to allow users to install onto the seat back by supply straps.
1. Connect the short strap latch into upper or center ring, and long strap latch into lower ring on the back of unit.
2. Take short strap around the headrest of the driver's seat, then connect the latch to other side ring.
3. Take long strap around the lower of driver's seat, then connect the latch to other side ring.
4. Adjust the straps tightly so that the unit is secured.
PUSH INTO

GB - 10
AUDIO
OUT
VIDEO
OUT
VIDEO
IN
AUDIO
IN
Watching a Videotape
1.Turn on the unit, set DVD/AV IN switch to AV IN.
2.Turn on the VCR and follow the instructions included with it to play the videotape.
CONNECTIONS
Using this unit with other equipment
A. Connecting a VCR
• Using an Audio/Video cable (not included).
1. Connect the yellow plug from VIDEO IN jack on your unit to VIDEO OUT jack on your VCR.
2.Connect the red and white plugs from AUDIO IN jacks on your unit to AUDIO OUT jacks on your VCR.
Note: If you have a monoVCR, the volume level from the speakers will be low.
B. Connecting a TV
• If your TV has Audio/Video inputs, you can also connect the unit to your TV using the Audio/Video cable.
1. Connect the yellow plug from VIDEO OUT jack on your unit to VIDEO IN jack on your TV.
2. Connect the red and white plugs from AUDIO OUT jacks on your unit to AUDIO IN jacks on your TV.
Left side of unit
(Yellow)
(Red)
(White)
(Yellow)
(Red)
(White)
VCR
TV
(Yellow)
(Red)
(White)
(Yellow)
(Red)
(White)
(continued to next page)(continued to next page)
(continued to next page)(continued to next page)
(continued to next page)
Watching a DVD on your TV
1.Turn on the unit, set DVD/AV IN switch to DVD.
2.Turn on the TV and follow the instructions included with it to play the DVD.
Left side of unit
Audio/Video cable
Audio/Video cable

GB - 11
Audio equipment with
digital audio input jack
Left side of unit
Coaxial digital audio cable
Amplifier of
stereo system, etc.
Left side of unit
(No need to connect the
Yellow video plug)
(Red)
(White)
(Red)
(White)
Notes:
• If the external equipment is a television and this audio system is closed to it, you may experience interference
if the tuner function is selected while the television is working.
• If you have a stereo VCR, make sure you set it in stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality.This is NOT caused by a defective DVD system.
C. Another source connection
• Using an Audio/Video cable (not included).
Connect ONLY the red and white plugs from AUDIO OUT jacks on your Unit to the AUDIO IN jacks on another
audio equipment.
or
• Using the Coaxial Digital Audio cable (not included).
Connect from coaxial DIGITAL OUT jack on your Unit to the DIGITAL IN jack on another audio equipment.
1.Turn on the Unit.
2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN
function.
Listening to another audio equipment
CONNECTIONS
Analogue connection
Digital connection
Audio/Video cable

GB - 12
CONNECTIONS
Using Headphones
• Turn down the volume before connection, and then adjust the level.
• When headphones are connected, no sound will be output from the unit's speakers.
Caution:
• Avoid listening to sound at levels which may be harmful to your ears.
Right side of unit
Dolby Digital (for DVD)
Dolby Digital is a sound system developed by Dolby Laboratories Inc. that gives movie theatre ambience to
audio output when the unit is connected to a Dolby Digital 5.1 channel processor or amplifier.
This unit automatically recognizes DVDs that have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo
on your unit.
Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.
HEADPHONES
(3.5mm diameter plug)
Left side of unit

GB - 13
PLAYING A DISC
This owner’s manual explains the basic instructions of this unit.Some DVD discs are produced
ina mannerthat allowsspecific orlimited operation during playback. As such, the unit may not
respondtoall operatingcommands.Thisisnota defectin the unit.Refertotheinstruction notes
ofdiscs.
“ ”may appear on the screen during operation. A“ ”means that the desired operation
is not permitted by the unit or disc.
Basic playback
Playing a Disc
1. Set POWER ON/STANDBY switch to POWER ON.
2. Set DVD/AV IN switch to DVD.
See CUSTOMIZINGTHE FUNCTION SETTINGS (page 23 to 27) before proceeding to step 4.
3.Press the left side corner of the disc door to open the disc door.
4.Hold the disc by its sides and carefully make it fit onto the central support of compartment with the label side
facing towards you until you hear a “click”.
5.Pushing the disc door to close the disc door.
It takes a short while for your unit to load the disc. After loading, for some discs, the unit will automatically start
playback of the disc.
6.Press the PLAY button.
Notes:
• Let the disc door open completely before removing the disc. Pushing the disc door to close the disc door after you
remove the disc.
DVD CD
Pausing playback (still mode)
Press the
II
PAUSE button.To resume normal playback, press the PLAY button.
Stopping playback
Press the STOP button at the location where you want to interrupt playback.To resume playback at the position
where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will reset
the disc to the beginning.
To skip to a different track
• Press the PREV button once to skip to the start of the previous track.
• Press the NEXT button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
(continuedtonext page)(continuedtonext page)
(continuedtonext page)(continuedtonext page)
(continuedtonext page)

GB - 14 (continued on next page)(continued on next page)
(continued on next page)(continued on next page)
(continued on next page)
Fast Forward/Fast Reverse
1.Press the SEARCH or SEARCH button on the remote
control when a disc is playing.
• The disc begins fast scan at x2 speed.
• Four speeds are available. Each time SEARCH or SEARCH
button on the remote control is pressed, the speed of fast scan
changes in the following sequence:
2.Press the PLAY button when you reach the desired point to resume playback at normal speed.
PLAYING A DISC
Zooming into an image
While a disc is playing, press the ZOOM button.
• While an image is zoomed, you can use , , and button to shift the view and display the part you want.
• To return to the normal view, press the ZOOM button until the “
off
“ symbol shows. The screen will return to
normal.
• When you reach the edge of the image, the display will not shift anymore in that direction.
SKIP (Forward / Reverse)
While you are playing a disc, press the NEXT button to move to the beginning of the next chapter or track. Press
the PREV button to move to the previous chapter or track and automatically start playing it.
CD
DVD
CD
DVD
DVD

GB - 15
Angle selection
Some DVDs contain scenes which have been shot from a
number of different angles.For these discs, the same scene
can be viewed from each of these different angles.
1.While you are playing a DVD with different angles recorded,
press the ANGLE button on the remote control to view the
number of the current angle.
2.Press the ANGLE button on the remote control repeatedly
to change the scene to the next angle in those recorded.
• About two seconds later, playback continues from the new
angle you selected.
• If no button is pressed within 10 seconds, playback
continues without changing the current angle.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been recorded.
• If only one angle is recorded, “
1/1
” is displayed.
PLAYING A DISC
Audio selection
On some discs, the sound is recorded in two or more formats.
Follow the directions below to select the type of playback.
1.While a disc is playing, press the AUDIO button to show the
current audio format number.
2.Press the AUDIO button repeatedly to select the desired
audio format.
DVD
Subtitle selection
1.While a DVD is playing, press the SUBTITLE button on the remote control to display the current language setting,
as shown in the example below.
2.Press the SUBTITLE button on the remote control repeatedly to select the desired subtitle language.
Notes :
• If only one language is recorded, the language does not change.
• About two seconds later, playback continues with the new subtitle you selected.
• The number of languages recorded differs depending on the disc.
• If no button is pressed within a few seconds, playback continues without changing the current subtitle.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• On some DVDs, subtitles are activated from the main menu of the DVD.Press the MENU button to activate the
main menu.
Sequence of angle shots (Example)
Notes :
• If only one audio format is recorded, the number does not change.
• About two seconds later, playback continues in the new audio format.

GB - 16 (continued on next page)(continued on next page)
(continued on next page)(continued on next page)
(continued on next page)
SPECIAL FUNCTIONS
DISPLAY function
Using DISPLAY button on the remote control, you can check and change the current settings of the following items:
ANGLE, AUDIO and SUBTITLE.
• While the disc is playing, press the DISPLAY button to display the screen shown below.
Elapsed time: Elapsed time from the beginning of the chapter which is currently playing.
Remaining time: Remaining time of the title which is currently playing.
• Press the DISPLAY button twice to display the screen shown as below.
• Press the ANGLE, AUDIO and SUBTITLE button to change the selected item.
Title skip
• The number of the title currently playing and total titles of disc.
• Press the GOTO button on the remote control to set your desired title, then press the ENTER button to confirm.
Chapterskip
• The number of the chapter currently playing and total chapters of the currently played title.
• Press the GOTO buttonontheremote control tosetyourdesiredchapter,then press the ENTER buttontoconfirm.
Time skip
• Elapsed time from the beginning of the currently playing chapter and the remaining time from the beginning of
the currently playing title.
• Press the GOTO button on the remote control to set your desired point to start playback, then press the ENTER
button to confirm.
Anglesetting
• The current angle is displayed. When a disc with only one angle is played back, “
Angle 1/1
” is displayed.
• Press the ANGLE button on the remote control to select the desired angle.
Audio setting
• The type of audio currently selected is displayed.
• Press the AUDIO button to select your desired type of audio.
Subtitle setting
• The subtitle number and language currently selected is displayed. When a disc with only one subtitle is played
back, “
1/1 Eng
” is displayed.
• Press the SUBTITLE button on the remote control to select your desired language.
GOTO function
This function allows you to skip directly to any part of the disc while a disc is playing.
Elapsed Time Remaining Time
Note :
• After settings, press the DISPLAY button again to return to the normal screen.
Basic playback
Chapter Time
Audio setting
Subtitle setting
Angle setting
Title
DVD

GB - 17
Locating a specific title
If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number.
1.In stop mode, press the GOTO button on the remote control.
2.Press , or button to highlight a specific field and press the corresponding number button(s) for the title you
want.
3.Press the ENTER button to confirm.The unit will start playback about 3 seconds later.
Locating a specific title / chapter / track
If you know the title / chapter / track number you want to play, you can locate a specifc title / chapter / track by directly
selecting a title / chapter / track number.
1.Press the GOTO button on the remote control to search your desired title / chapter / track.
2.Press , or button to highlight a title / chapter / track and press the corresponding number button(s) for the
chapter you want.
3.Press the ENTER button to confirm.The unit will start playback about 3 seconds later.
DVD
CD
(continued on next page)(continued on next page)
(continued on next page)(continued on next page)
(continued on next page)
SPECIAL FUNCTIONS
Basic playback
CD
DVD
DVD

GB - 18
Locating a specific time
You can move to a specific location by entering its corresponding time (hours, minutes, seconds)
1.Press the GOTO button on the remote control.
2.Press or button to highlight time.
3.Press the corresponding number buttons for the setting point you want.
• The first two numbers you entered represent hours.
• The second two numbers you entered represent minutes.
• The third two numbers you entered represent seconds.
4.Press the ENTER button to confirm.The unit will start playback about 3 seconds later.
Notes :
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD disc.
• You can move through the menu by pressing the and buttons.
Angle setting
1.Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many angles are
recorded on the disc.
2.Press the ANGLE button on the remote control repeatedly to
select your desired angle.
3.The unit will change to your desired angle about 3 seconds later.
4.Press the DISPLAY button to resume the normal screen.
Audio setting
1.Press the DISPLAY button twice. The FUNCTION menu is
displayedonthescreenand youcan see howmany audio formats
are recorded on the disc.
2.Press the AUDIO button repeatedly to select your desired type of
audio.
3.The unit will change to your desired type audio about 3 seconds
later.
4.Press the DISPLAY button to resume the normal screen.
Subtitle setting
1.Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many subtitle
formats are recorded on the disc.
2.Press the SUBTITLE button on the remote control repeatedly to
select your desired language.
3.The unit will change to your desired language about 3 seconds
later.
4.Press the DISPLAY button to resume the normal screen.
DVD CD
SPECIAL FUNCTIONS
Basic playback
CD
DVD
DVD
DVD
DVD

GB - 19
Programmable memory
Thetwotypesof programmed playback provided by thisunitaretitleprogrammedplayback and chapter programmed
playback.
Title / Chapter programmed playback
1.Press the MEM (MEMORY) button on the remote control while the disc is stopped.
2.Enter the title numbers in
- -
. Use or button to move the highlight to chapter and enter the chapter numbers
in
- -
.
3.Use , , or button to move to the other field.
4.Repeat steps 2 to 3.
5.Press the PLAY button to start the programmed playback.
Notes :
• If you press the STOP button, the programmed selections will be cleared.
3.Use , , or button to other field.
4.Repeat steps 2 to 3.
5.Press the PLAY button to start the programmed playback.
Track
CD / DVD PROGRAMMABLE MEMORY
Advanced
playback
Title Chapter
Programmable memory
Track programmed playback
1.Press the MEM (MEMORY) button on the remote control while the disc is stopped.
2.Enter the track numbers in
- - -
.
DVD
CD