Fig. 1
88•• EENNGGLLIISSHH
SETTING DATE/TIME
1. When the unit is off, press and release both the and button at
the same time. The month will begin to ash, Fig. 1.
2. Press the button to change until the desired number appears. To
scroll through the numbers quicker, hold down the button as the
numbers advance.
3. Press the button to conrm the month entry.
4. Next, the date will blink. Repeat steps 2 and 3 to set the date, then
hours, then minutes. This unit does not track the year.
5. After setting the minutes, the unit will automatically exit out of the
date/time setting mode.
When the monitor is off, the date and time will still appear at the top of
the screen.
T ime is displayed in 24h Milita y Time. This cha t explains the time
conve sion.
IT IS NECESSARY TO SET THE DATE AND TIME FOR THE MONITOR EVERY
TIME BATTERIES ARE INITIALLY INSTALLED OR RE LACED.
DATE AND TIME WILL DEFAULT TO FACTORY SETTINGS, 12:00 A.M. 1M
1D, IF YOU DO NOT CHOOSE TO SET THE CORRECT INFORMATION.
MILITARY TIME = REGULAR TIME
1:00 = 1am 7:00 = 7am 13:00 = 1pm 19:00 = 7pm
2:00 = 2am 8:00 = 8am 14:00 = 2pm 20:00 = 8pm
3:00 = 3am 9:00 = 9am 15:00 = 3pm 21:00 = 9pm
4:00 = 4am 10:00 = 10am 16:00 = 4pm 22:00 = 10pm
5:00 = 5am 11:00 = 11am 17:00 = 5pm 23:00 = 11pm
6:00 = 6am 12:00 = 12pm 18:00 = 6pm 24:00 = 12am