Verizon CP920 User manual

Quick
install guide
One Talk from Verizon CP920
IP Conference Phone
verizonwireless.com/support/one-talk/
Quick install guide

Package contents
CP920 IP Conference Phone
Note: We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in reduced performance.
Ethernet cable (7.5m CAT5E UTP cable)
Power adaptor
Quick install guide

Setting up the phone
Internet
DC12V
B
Internet
DC12V
Internet
A
Internet
DC12V
AC power option Power over
Ethernet (PoE)
option
Power adaptor IEEE 802.3af compliant
PoE hub/switch
Note: The IP phone should be used with Yealink original power adaptor (12V/1A) only. If inline power (PoE)
is provided, you don’t need to connect the power adaptor. Make sure the hub/switch is PoE compliant.
1. Connect the power and wired network.
You have two options for network and power connections. Your system administrator will advise you
which one to use.
You can also connect to the wireless Wi-Fi network after startup. Refer to the “Configuring Wi-Fi via
phone user interface” section for more information.
2. Connect the optional USB flash drive.

Network details & coverage maps at vzw.com. © 2018 Verizon.
Hardware component instructions
Mute key
Speaker
Keypad
Volume(+) key
Volume(—) key
Microphone
Welcome
Initializing...Please wait
1
2
3
4
5
7
8
9
LCD screen
Soft keys
1
1
2
10
2
11
Bluetooth® key
O-hook key
12
OK key
On-hook key
6
13
14
Up Navigation key
Down Navigation key
Startup
After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is
ready for use. You can configure the phone via the
phone user interface.
Welcome
Initializing...Please wait
Configuring Wi-Fi via phone user interface
1. Press the Menu soft key and select Settings —
>Basic — >Wi-Fi.
2. Press the Switch soft key to turn Wi-Fi on.
3. Press the Save soft key. The phone will automatically search for available wireless Wi-Fi networks
in your area.
4. Select an available wireless network from the list of N available network(s).
5. Press the Connect soft key to connect to the wireless network.
6. If the network is secure, enter its password in the Password field and then tap the OK soft key.