Verizon Ellipsis Jetpack CD50 User manual

Connecting a Chromebook
to a Verizon Hotspot
1
PURPOSE - This document will provide steps to connect a Chromebook to the JPS-issued
wireless hotspot. A working Internet connection is required to log into a Chromebook.
1. Turn on the Wireless Hotspot unit by pressing and holding the on button for three
seconds. You will see the Ellipsis screen booting.
Location of power button and Ellipsis boot screen
2. Once the Jetpack finishes booting, you will see the following screen.
3. Turn on the JPS Chromebook. When the login screen appears, do not attempt to log in
yet.

Connecting a Chromebook
to a Verizon Hotspot
2
4. At the bottom right of the screen, click on the time.
5. Select “Not connected”. The Chromebook Internet will turn on automatically if it is
turned off.
6. The Chromebook will show a list of available internet networks. Select the Ellipsis
Jetpack CD50 from the list (example list below).

Connecting a Chromebook
to a Verizon Hotspot
3
7. Type the Internet (Wi-Fi) network password. This password can be obtained by pressing
the front button on the hotspot three times. The password will be eight characters in
length.

Connecting a Chromebook
to a Verizon Hotspot
4
8. Click on the “Connect” button.
Once the Chromebook has successfully connected to the Internet (Wi-Fi), you can log
into your Chromebook with your JPS username and password.
9. Turning off the hotspot –When you are finished with the hotspot, you can turn it off by
holding the front button for 3-4 seconds until you see the word GOODBYE in the screen.
It may take a few seconds to power down.