Verizon FiOS-G1100 User manual

Scan to see how to connect
devices to Wi-Fi or visit
verizon.com/wifivideo
11326412
11326412 FQG Ethernet
©2018 Verizon. 6-18
First 15 minutes
Wait at least 15 minutes for router
to activate once plugged in.
Router lights will flash and turn o/on
during activation.
After 15 minutes
When back light is red, Verizon
support is needed.
When GLOBE light is flashing red,
Verizon support is needed.
Support
Go online to
verizon.com/internetsetup
Troubleshooting
Installation guide
S:5.25”
S:10.75”
180375_L02_11326412.indd 1 6/11/18 2:10 PM

Wired
1. Connect the ethernet cable to any
YELLOW ethernet port on your router.
2. Connect the other end to your computer.
Wi-Fi
1. Locate the Wi-Fi label on your router.
2. Launch your device’s Wi-Fi application
and locate your network name.
3. Choose a Wi-Fi network
• 5 GHz network is faster but has less range.
•2.4 GHz network has a greater range but slower speeds.
Note: Older devices can only use 2.4 GHz.
4. Enter password from the label.
Visit myverizon.com to verify your internet is working.
1. Connect the ethernet cable
from the WAN port on your
router to a wall outlet.
Follow these steps
Ethernet
Coax
If you have Fios® T V,
connect the coax cable.
2. Connect the power cord.
3. Activation takes up to 15 minutes.
4. Router turns on automatically.
5. Setup is complete when front
lights are white and back light
is green.
Wired or Wi-Fi?
S:5.25”
S:10.75”
180375_L02_11326412.indd 2 6/7/18 3:36 PM

Scan to see how to connect
devices to Wi-Fi or visit
verizon.com/wifivideo
11326412
11326412 FQG Ethernet
©2018 Verizon. 6-18
First 15 minutes
Wait at least 15 minutes for router
to activate once plugged in.
Router lights will flash and turn o/on
during activation.
After 15 minutes
When back light is red, Verizon
support is needed.
When GLOBE light is flashing red,
Verizon support is needed.
Support
Go online to
verizon.com/internetsetup
Troubleshooting
Installation guide
S:5.25”
S:10.75”
180375_L02_11326412.indd 1 6/11/18 2:10 PM