Verizon Ellipsis Jetpack MHS900L Technical manual

Digital Device Usage
HOTPSPOT INFORMATION GUIDE
Verizon Ellipsis Jetpack MHS900L
The Jetpack has 2 different operating modes:
USB Tethered Mode - Use the USB cable to connect your notebook or other computing device to
the Jetpack for Internet access.
Note: A USB cable connection between older Jetpack models and computers may disable
Wi-Fi capability.
Wi-Fi Mode - Connect multiple Wi-Fi enabled devices without a USB or other wired connection. Just
turn on the Jetpack and it connects to our network.
Make sure battery and sim card are inserted properly

Connect using USB Cable
When a compatible Jetpack is connected to a computer using the micro USB cable, Wi-Fi is disabled,
only allowing use with 1 device. Using the Jetpack as a modem provides more security than sending data
over a Wi-Fi connection.
1. Insert the USB cable in the appropriate jack of the Jetpack.
2. The power LED light turns on.
Connect using Wifi
1. Press the Power button on the Jetpack.
2. Once the Jetpack has been activated, it automatically connects to the Internet over the Verizon
wireless network.
3. On the device you want to connect to the Jetpack, go to its Settings menu to establish a Wi-Fi
connection to the Jetpack.
Jetpack is password-protected when in Wi-Fi mode
By default, your device has a password that must be entered to connect to it through Wi-Fi. Your Wi-Fi
enabled device will prompt you to enter the password when you attempt to connect to the Jetpack.
The password can be found on the Connect Information card included in the box. The password is also
available in the device's display menu.

TMobile T9 Franklin Hotspot
1. Make sure the battery and SIM card are inserted.
2. You can find the Wi-Fi Name and password at any time you need. Press the
Power/Menu button shortly when the display is on. (Please note this info is not printed
on the back cover) The menu will switch every 3 seconds and show you the Wi-Fi name
and password.
a. Wi-Fi name (SSID) will be "SCS2675”
b. The default Wi-Fi password: scswireless
3. Ensure the battery and SIM card are inserted.
4. Hold the Power key for 3 seconds until all LED indicators illuminate in blue.
5. Connect your Wi-Fi device to your Mobile Hotspot.
6. On your computer, search for available Wi-Fi networks and select network name (SSID)
located the back panel of your mobile hotspot.
From a Windows PC:
i. Left-click Wireless Network Connection on the taskbar to view available
networks.
ii. Choose the SSID from the list of available networks.