Vermeiren Inovys II User manual

VERMEIREN
Inovys II
I N S T R U C T I O N M A N U A L
I S T R U Z I O N I P E R L ' U S O
MA N U A L DE INSTRUCCION E S
I N S T R U K C J A O B S Ł U G I

Instructions to the specialist dealer
This instruction manual is part and parcel of the product and must accompany every product sold.
Version: A, November 2011
All rights reserved, including translation.
No part of this manual may be reproduced in any form what so ever (print, photocopy, microfilm or any other process) without
written permission of the publisher, or processed, duplicated or distributed by using electronic systems.
© N.V. Vermeiren N.V. 2011
Istruzioni per il rivenditore
Il presente Manuale di istruzioni è parte integrante del prodotto e deve essere fornito assieme alla prodotto.
Versione: A, Novembre 2011
Tutti i diritti riservati (anche sulla traduzione).
Il presente manuale non può essere riprodotto, neppure parzialmente, con alcun mezzo (stampa, fotocopia, microfilm o altro
procedimento) senza l’autorizzazione scritta della casa produttrice, né elaborato, duplicato o distribuito con l’ausilio di sistemi
elettronici.
© N.V. Vermeiren N.V. 2011
Instrucciones destinadas a los distribuidores especializados
El presente manual de instrucciones es parte integrante del producto y se debe adjuntar a todas las producto que se vendan.
Versión: A, Noviembre 2011
Todos los derechos reservados, incluidos los de la traducción.
Se prohíbe la reproducción total o parcial del presente manual de cualquier forma (impresión, fotocopia, microfilm o cualquier otro
procedimiento), así como la edición, copia o distribución empleando sistemas electrónicos, sin el permiso escrito del editor.
© N.V. Vermeiren N.V. 2011
Instrukcje dla wyspecjalizowanego sprzedawcy
Niniejsza instrukcja obsługi jest nieodłącznączĊĞciąproduktu i musi byüdołączona do kaĪdego sprzedawanego produktu.
Wersja: A, Listopad 2011
Wszelkie prawa zastrzeĪone, łącznie z tłumaczeniem.
ĩadna czĊĞü niniejszej instrukcji nie moĪe byüpowielana w jakiejkolwiek formie (drukowanej, fotokopii, mikrofilmu ani innej) bez
pisemnej zgody wydawcy, nie moĪe byürównieĪprzetwarzana, kopiowana ani rozprowadzana za pomocąsystemów
elektronicznych.
© N.V. Vermeiren N.V. 2011

Inovys II
2011-11
ͳ
Contents
Preface ......................................................................................................................................2 
1  Productdescription......................................................................................................3 
1.1  Intended Use................................................................................................................3 
1.2  Technical specifications ..............................................................................................4 
1.3  Drawing.......................................................................................................................5 
1.4  Accessories..................................................................................................................5 
1.5  Explanation of symbols...............................................................................................5 
1.6  Safety rules..................................................................................................................6 
2  Use ................................................................................................................................7 
2.1  Carrying the wheelchair ..............................................................................................7 
2.2  Mounting the rear wheels (only for quick release 22", 24" rear wheels)...................7 
2.3  Mounting or removing of the footrests .......................................................................7 
2.4  Angle of footrests........................................................................................................8 
2.5  Fold away leg support .................................................................................................8 
2.6  Operating the brakes....................................................................................................8 
2.7  Mounting or removing of arm supports ......................................................................9 
2.8  Pushing handles.........................................................................................................10 
2.9  Mounting or removing backrest ................................................................................10 
2.10  Transfer in and out the wheelchair............................................................................10 
2.11  Correct position in the wheelchair ............................................................................11 
2.12  Riding the wheelchair (only for 22" and 24" rear wheels).......................................11 
2.13  Riding the wheelchair by an attendant ......................................................................11 
2.14  Moving on slopes ......................................................................................................11 
2.15  Negotiating steps or curbs.........................................................................................12 
2.16  Taking off the wheels (only for quick release 22", 24" rear wheels) .......................13 
2.17  Backrest adjusting / Seat inclination .........................................................................13 
2.18  Transport in the car....................................................................................................14 
2.19  Use of the wheelchair as seat in a motor vehicle ......................................................14 
3  Installation and adjustment .....................................................................................16 
3.1  Tools..........................................................................................................................17 
3.2  Manner of delivery....................................................................................................17 
3.3  Mounting backrest.....................................................................................................17 
3.4  Adjusting the seat height and seat angle ...................................................................17 
3.5  Adjust the seat depth .................................................................................................19 
3.6  Adjust the backrest....................................................................................................20 
3.7  Adjust the brakes.......................................................................................................20 
3.8  Adjusting of the footrests ..........................................................................................21 
3.9  Adjusting the armrests...............................................................................................23 
3.10  Adjusting of the tip cap .............................................................................................24 
4  Maintenance ..............................................................................................................24 
4.1  Regular Maintenance.................................................................................................24 
4.2  Shipping and storage .................................................................................................25 
4.3  Care ...........................................................................................................................25 
4.4  Inspection ..................................................................................................................26 
4.5  Disinfection ...............................................................................................................26 
5  Guarantee ..................................................................................................................28 
6  Disposal......................................................................................................................28 
7  Declaration of conformity ........................................................................................28 
8  Maintenance plan......................................................................................................29 
9  Disinfection book ......................................................................................................29 

Inovys II
2011-11
ʹ
Preface
First of all we want to thank you for putting your trust in us by selecting one of our
wheelchairs.
The Vermeiren wheelchairs are the result of many years of research and experience. During
the development, special attention was given to the ease of use and the serviceability of the
wheelchair.
The expected lifetime of your wheelchair is strongly influenced by the care and maintenance
of the wheelchair.
This manual will help you get acquainted with the operation of your wheelchair.
Following the user instructions and the maintenance instructions are an essential part of the
warranty.
This manual reflects the latest product developments. Vermeiren has the right to introduce
changes without the obligation to adapt or replace previously delivered models.
For any further questions, please consult your specialist dealer.

Inovys II
2011-11
͵
1 Productdescription
1.1 Intended Use
The wheelchair is intended for people with walking difficulties or no walking abilities.
The wheelchair is designed to transport 1 person.
The wheelchair is suited for indoor and limited outdoor use.
The user can propel the wheelchair by himself (only for 22", 24" rear wheels) or have the
wheelchair pushed by an attendant.
The different types of fittings and accessories, and the modular construction allow full use by
persons disabled by:
•paralysis
•loss of limbs (leg amputation)
•limb defects or deformations
•stiff or damaged joints
•heart insuffiencies and poor blood circulation
•balance disturbances
•cachexia (decrease in muscle)
•and also for aged persons.
When providing for individual requirements:
•body size and weight (max. 135 kg)
•physical and psychological condition
•residential circumstances
•environment
should be taken into consideration.
Your wheelchair should only be used on surfaces where all four wheels are touching the
ground and where there is sufficient contact to propel the wheels equally.
Ride only over flat surfaces with firm ground. It should not be used to drive on ground such
as gravel, mud, cobble stones, grassy surfaces, or other ground that is not firm or level.
The wheelchair should not be used as a ladder, nor is it a transport for heavy or hot objects.
When used on mats, carpeted floors or loose floor coverings, the floor covering can get
damaged.
Use only Vermeiren approved accessories.
The manufacturer is not liable for damage caused by the lack of or improper service or as a
result of not following instructions from this manual.
Compliance with the user and maintenance instructions are an essential part of the
guarantee conditions.

Inovys II
2011-11
Ͷ
1.2 Technical specifications
Technical terms below are valid for the wheelchair in standard settings.
If other footrests / arm supports or other accessories are used, the tabulated values will change.
Make
Vermeiren
Address
Vermeirenplein 1/15, B
-
2920
Kalmthout
Type
Manual wheelchair
Model
Inovys
II
Maximum occupant mass
135
kg
Description
Dimensions
Effective seat width
400 mm 450 mm 500 mm
Overall width (depends on the seat width)
630 mm 680 mm 730 mm
Dismantled width (without arm support)
600 mm 650 mm 700 mm
Description
Dimensions Min.
Dimensions Max.
Overall length with footrests (depends on the
adjusted seat depth)
1010 mm 1050 mm
Dismantled length without footrests (depends on the
adjusted seat depth)
830 mm 870 mm
Dismantled height (Backrest folded, without arm
support)
710 mm 780 mm
Total mass
± 36 kg (24" rear wheels) ± 36,40 kg (16" rear wheels,
drum brakes)
Mass of heaviest part
± 20,70 kg (24" rear wheels) ± 25,20 kg (16" rear wheels,
drum brakes)
Masses of parts that can be dismantled or removed Footrests: 4,25 kg; Arm supports: 3,45 kg;
Rear wheels 24": 4,15 kg; Backrest: 3,45 kg
Static stability downhill
10°(in standard configuration)
Static stability uphill
15°(in standard configuration)
Static stability sideways
12°(in standard configuration)
Obstacle climbing
60 mm
Seat plane angle
0° +21°
Effective seat depth
460 mm 520 mm
Seat surface height at front edge (with cushion)
460 mm 530 mm
Backrest angle
0° +54°
Backrest height
550 mm 585 mm
Distance between footrest and seat
400 mm 570 mm
(Do not use maximum
distance with the footrest in
vertical position -- touch the
ground)
Angle footplate
80° 100°
Angle between seat and footrest
100° 190°
Distance between armrest and seat
220 mm 320 mm
Front location of armrest structure
460 mm 490 mm
Hand rim diameter (only for 24" rear wheels)
535 mm
Horizontal location of axle (deflection)
-8 mm (16" rear wheels)
-4 mm (24" rear wheels)
41 mm (16" rear wheels)
42 mm (24" rear wheels)
Minimum turning radius
1520 mm 1620 mm
Diameter Krypton PU Rear wheels
16" (T30) + drum brakes 22" 24"
Diameter Krypton PU steering wheels
200 mm
Color of frame
C55

Inovys II
2011-11
ͷ
Cover
Soft grey
Storage and use temperature
+ 5 °C + 41 °C
Storage and use humidity
30% 70%
We reserve the right to int
roduce technical changes. Measurement tolerance
±
1
5
m
m / 1,5 kg
/ °
Table 1: Technical specifications Inovys II
The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
ISO 7176-19: Use as seats in motor vehicles
1.3 Drawing
1.4 Accessories
The following accessories are available for the Inovys II:
•Wooden table (B12)
•Headrest (L55)
•Headrest (L58)
•Personal safety belt (B58)
•Horizontal wedge (B22)
•Hemiplegic armrests (B66)
Contact your specialist dealer about other accessories. He will gladly advise you.
1.5 Explanation of symbols
Maximum mass
Indoor and outdoor use
Down slope
Up slope
CE conformity
1 = Pushing handles
2 = Push bar
3 = Back
4 = Armrests
5 = Arm supports
6 = Brakes
7 = Tip cap
8 = Rear wheels (driving wheels)
9 = Frame
10 = Front wheels (steering wheels)
11 = Seat
12 = Leg supports
13 = Footrests
14 = Identification plate

Inovys II
2011-11
͸
1.6 Safety rules
 To prevent injury and/or damage to your wheelchair, make sure that no objects
and/or body parts are caught in the spokes of the driving wheels (for 22", 24" rear
wheels).
 The parking brakes should be applied before getting into and out of the wheelchair.
 When getting into and out of the wheelchair, do not stand on the footplates. These
should be folded up beforehand, or the leg supports should be swung completely
outwards out of the way.
 Investigate the effects of shifting the centre of gravity on the behavior of the wheelchair,
for example on up or down gradients, on laterally sloping ground, or when overcoming
obstacles. Obtain support from an attendant.
 If you want to pick up something (lying in front of, on the side, or to the rear of the
wheelchair), you should not lean too far out to avoid tipping over.
 When moving through doors, arches, etc. ensure that there is enough room at the sides
so that you do not get your hands or arms caught or crushed and that there is no
damage to the wheelchair.
 Only use your wheelchair according to regulations. For example, avoid uncontrolled
rolling against obstacles (steps, curbs, doorframes, etc) or dropping down from ledges.
The manufacturer cannot assume liability for damage caused by overloading, collision
or other improper use.
 Stairs may only be negotiated when aided by another person. If furnishings like drive-on,
ramps or lifts are available, use them.
 When moving on the public highway, you are subject to the rules of the road.
 When driving your wheelchair, you should not be under the influence of alcohol or
medicine as in the case of driving other vehicles. This also applies to indoor driving.
 When travelling outdoors, adapt your driving to weather and traffic conditions.
 When transporting the wheelchair, never pick it up by grasping removable parts
(arm supports, footrests, etc.)
 To be better visible when driving in the dark, wear the brightest possible clothing or
clothes with reflectors, and check that the reflectors mounted on the sides and rear of
the wheelchair are clearly visible.
 Be careful when using possible causes of fire such as cigarettes since they may set the
seat and back covers alight.
 Never exceed the maximum load of 135 kg.
 Take care during all adjusting functions that no objects or body parts come into the area
of the adjustment as there is the risk of squashing.
 Check that the profile depth of the tyres is adequate.
 To avoid hand injury, do not push your hand between the driving wheel and the knee
lever brake when propelling your wheelchair (only for 22", 24" rear wheels with hand
rim).
 When driving outdoors, wear gloves which improve your grip on the tyre grips and
protect your fingers against dirt and heating (only for 22", 24" rear wheels with hand
rim).
 Take care when attaching the quick-assembly wheels that the axle is completely and
properly engaged (only for 22", 24" rear wheels with hand rim).

Inovys II
2011-11
͹
2 Use
This chapter describes the everyday use. These instructions are for the user and the
specialist dealer.
The wheelchair is delivered fully assembled by your specialist dealer. The instructions
intended for the specialist dealer on how to set up the wheelchair are given in § 3.
2.1 Carrying the wheelchair
The best way to carry the wheelchair is to make use of the wheels and roll the wheelchair.
If this is not possible (e.g. when the rear wheels are taken off for transportation in a car),
firmly grasp the frame on the front and the back. Do not use the foot or arm rests or the
wheels to grasp the wheelchair. At least two persons are required for transporting the
wheelchair.
2.2 Mounting the rear wheels (only for quick release 22", 24" rear
wheels)
1. Take the rear wheel and push on button c .
2. Keep the button pushed in and mount the rear
wheels axle till it stops.
3. Release the button.
4. Check that the wheel is secured.
2.3 Mounting or removing of the footrests


 

 WARNING: Risk of injury - Make sure that the footrests are firmly locked before
using the footrests.
The mounting of the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchair frame and mount the tube hood
c
into the frame.
2. Swing the footrest inwards till it clicks in
position.
3. Swing the foot plate downwards.
To take off the footrests:
1. Pull lever
d upwards.
2. Swing the footrest to the outside of the
wheelchair till it comes loose from the guidance.
3. Pull the footrest from tube hood c .

Inovys II
2011-11
ͺ
2.4 Angle of footrests


 

 CAUTION: Risk of injury – Check that the adjusting button c
cc
cis well fixated after
adjusting the angle of the footrest.


 

 CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
adjusting mechanism. To adjust the angle of the footrest, only touch them at the
level of the footplates-to avoid injury on your fingers.


 

 CAUTION: Risk of injury – Make sure that no objects and/or persons are inside
the swinging range of the adjust functions.
The angle or inclination of the footrest can be
easily adjusted as follow:
1. Loosen the adjusting button
c on the side of
the footrest.
2. Adjust the angle (range 100°- 190°: step
less) of the footrest to a comfortable
position. Grasp the footrest at the level of the
footplates.
3. Retighten the adjusting button cfirmly by
hand.
2.5 Fold away leg support
The leg support can be easily fold away as follow:
1. Take the leg support con the outside. (Figure A)
2. Fold the leg support cto the front. (Figure A)
3. Take the leg support con the back. (Figure B)
4. Swing the leg support cforwards. (Figure B)
To put the leg supports in the begin position you can do the reverse. Check you do not
place your fingers between the movable parts or were they can be squeezed.
2.6 Operating the brakes


 

 WARNING: The brakes are not used to slow down the wheelchair during
movements – Use the brake only to prevent the wheelchair from unintended
movements.


 

 WARNING: Good operation of the brakes is influenced by wear and
contamination of the tires (water, oil, mud, …) – Check the condition of the tires
before each use.
A
B

Inovys II
2011-11
ͻ


 

 WARNING: The brakes are adjustable and can wear – Check the operation of the
brakes before each use.
To apply the brakes:
1. Push the brake handles cforward till you feel a
distinctive click.


 

 CAUTION: Risk of unintended movement –
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
To release the brakes:
1. Release one brake by pulling the handle c
backwards.
2. Hold the hand rim (if available) of the release
wheel with your hand.
3. Release the second brake by pulling the handle
cbackwards.
2.7 Mounting or removing of arm supports


 

 CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
bottom side of the arm support.
The arm supports of the wheelchair can be mounted
by following instructions.
1. Pull out the star knob c.
2. Mount the arm support from above into the
provided bracket d.
3. Let go of the star knob c.
4. Turn the star knob cclockwise until it is finger-
tight.
5. Check that the arm support is firmly secured.
The arm supports of the wheelchair can be removed
by following instructions.
1. Turn the star knob canti-clockwise.
2. Pull out the star knob c.
3. Remove the arm support out the bracket d.
4. Let go of the star knob c.
The armrest of the wheelchair can be adjusted in 6
different heights (steps from 20 mm):
1. Turn the star knob canti-clockwise.
2. Pull out the star knob c.
3. Pull the armrest into the required position.
4. Let go of the star knob c.
5. Turn the star knob cclockwise until it is finger-
tight.
6. Check that the armrest is firmly secured.

Inovys II
2011-11
ͳͲ
2.8 Pushing handles


 

 CAUTION: Risk of injury - Make sure that the star buttons c
cc
care properly
tightened.


 

 CAUTION: Risk of tipping over - Use only the last indentation of the pushing
handle tube for the maximum height adjustment.
The pushing handles can be adjusted in height
depending on the size of the attendant.
1. Loosen the star button clocated on the
back of the backrest.
2. Pull the pushing handles into the desired
position (7 positions). Indentions d(steps
30 mm) have been placed into the tubing of
the pushing handles.
3. Retighten the star button cfirmly by hand.
2.9 Mounting or removing backrest


 

 WARNING: Risk of injury – Check that the backrest is firmly mounted into the
four brackets before using your wheelchair.


 

 WARNING: Risk of injury – Avoid getting your fingers, clothes caught during the
assembly process.
The backrest of the wheelchair can be mounted
by following instructions.
1. Mount the backrest into the four brackets
c+ d.
2. Turn on the upper star buttons cto lock the
star buttons by hand.
3. Check that the backrest is firmly fixated.
To remove the backrest of the wheelchair:
1. Loosen the upper star buttons c.
2. Pull the backrest upwards out the four
brackets c+ d.
2.10 Transfer in and out the wheelchair


 

 CAUTION: In case you cannot perform the transfer in a safe manner, ask
someone to assist you.


  CAUTION: Risk of tipping over of the wheelchair – Do not stand on the foot
plates.

Inovys II
2011-11
ͳͳ
1. Place the backrest in the most vertical position.
2. Position the wheelchair as close as possible to
the chair, couch or bed to/from you wish to
transfer.
3. Check both brakes from the wheelchair are in
the on position.
4. Fold the foot plates upwards to prevent
standing on them.
5. If the transfer is on the side of the wheelchair,
you can remove the arm support (see § 2.7)
and/or footrest (see § 2.3) on that side.
6. Transfer to/from the wheelchair.
2.11 Correct position in the wheelchair
Some recommendations for a comfortable use of the wheelchair:
•Position your backside as close as possible to the back rest.
•Make sure your upper legs are horizontal – If needed adjust the length of the
footrests. (see § 3.8.1)
2.12 Riding the wheelchair (only for 22" and 24" rear wheels)


 

 WARNING: Risk of clamping – Prevent your fingers from being caught by the
wheels spokes.


 

 WARNING: Risk of clamping – Be careful passing through restricted passages
(e.g. doors).


 

 WARNING: Risk of burns – Be careful when driving in hot or cold environments
(sunshine, extreme cold, saunas, etc.) for a sufficient amount of time and when
touching - Surfaces can assume the environment temperatures.
1. Release the brakes.
2. Take both hand rims at their highest position.
3. Lean forward and push the hand rims forward until straight arms.
4. Swing your arms loosely back to the hand rims topside and repeat the movement.
2.13 Riding the wheelchair by an attendant


 

 WARNING: Risk of clamping – Be careful passing through restricted passages
(e.g. doors).


 

 WARNING: Risk of burns – Be careful when driving in hot or cold environments
(sunshine, extreme cold, saunas, etc.) for a sufficient amount of time and when
touching - Surfaces can assume the environment temperatures.
The wheelchair can be pushed with the pushing handles or push bar by an attendant.
2.14 Moving on slopes


 

 WARNING: Control your speed – Moving on slopes as slow as possible.


 

 WARNING: Consider the capacities of your attendant – If your attendant does not
have enough force to control the wheelchair, put on the brakes.


 

 WARNING: Risk of tipping over – Lean forward to move your centre of gravity
forward. To improve a better stability.
1. If available on the wheelchair, wear the safety belt.
2. Do not attempt moving on too high slopes. The maximum slope angles (upwards and
downwards) are mentioned in table 1.
3. Ask an attendant to help you moving on the slope.
4. Lean forward to move your centre of gravity forward.

Inovys II
2011-11
ͳʹ
2.15 Negotiating steps or curbs


 

 WARNING: Risk of injury – Transporting a patient up or down steps is to be done
with at least two attendants.


 

 WARNING: Risk of injury – Wear suitable safety belt systems while being
transported (information obtainable from your specialist dealer).


 

 WARNING: Risk of injury – Sit quietly in your wheelchair and avoid jerky
movements. If you cannot sit quietly when being transported because of illness or
disability (e.g. slightly spastic, etc.), then at least two persons are required to
secure the wheelchair on both sides by taking hold of fixed parts of the frame.


 

 WARNING: Risk of injury – Make sure that your arms and legs do not protrude
outside the wheelchair while being transported.


 

 WARNING: Risk of injury or damages – No persons or objects should be below
the wheelchair while being transported.


 

 WARNING: Risk of injury – When the footrests have been removed, the legs of
the patient are not secured.
2.15.1 Getting down steps or curbs
Riding down steps or curbs can be done moving forwards with an attendant:
1. Make sure that the pushing handles are sufficiently tight.
2. Remove the footrests.
3. Ask the attendant to tip the wheelchair slightly backwards with the tip cap.
4. Get past the curbs while moving on the rear wheels and push the wheelchair
forwards.
5. The second person secure the wheelchair in front by taking hold of the front of the
frame after removing the footrests. He must walk backwards.
6. Put the wheelchair back on the four wheels after passing the curbs.
2.15.2 Moving up steps or curbs
Moving up steps or curbs can be done moving backwards with an attendant:
1. Make sure that the pushing handles are sufficiently tight.
2. Remove the footrests.
3. Turn the wheelchair to have the rear wheels facing the curb.
4. Lean backwards and move your centre of gravity above the rear wheels.
5. Ask the attendant to pull the wheelchair on the curb.
6. The second person secure the wheelchair in front by taking hold of the front of the
frame after removing the footrests. He must walk forewards.
7. Take back the normal position in the wheelchair.
2.15.3 Taking of stairs


 

 WARNING: Risk of tipping over – Taking of stairs shall always be done with 2
attendants.


 

 WARNING: Risk of injury – Lifting the wheelchair while the patient is seated in
the wheelchair is forbidden! Always keep the rear wheels on the ground/stairs.


 

 WARNING: Risk of injury – Wear suitable safety belt systems while being
transported (information obtainable from your specialist dealer).


 

 WARNING: Risk of injury or damages – No persons or objects should be below
the wheelchair while being transported.


 

 WARNING: Risk of injury – When the footrests have been removed, the legs of
the patient are not secured.

Inovys II
2011-11
ͳ͵
Taking the wheelchair of stairs shall be according following rules:
1. Remove the footrests.
2. One attendant tip the wheelchair slightly backwards.
3. The second attendant take the front of the frame.
4. Stay calm, avoid sudden movements and keep your arms inside the wheelchair.
5. Take the steps on the rear wheels of the wheelchair.
6. Mounting the footrests back after taking the stair.
2.15.4 Using ramps


 

 WARNING: Risk of injury – Do not exceed the maximum load or the ramps.


 

 WARNING: Risk of injury - Choose the correct ramps so there cannot be caused
any injury or damage. We do not accept any liability for injury or damage caused
by an improper choice of ramps.


 

 WARNING: Risk of injury - Be sure that the wheel height is high enough to get
over the free height of the ramps. The wheelchair frame may not touch the
ramps.


 

 WARNING: Risk of injury - Use a restraining safety belt to secure yourself in your
wheelchair.


 

 WARNING: Risk of tipping over - Put the adjustment functions (seat, back,
footrests, ...) that the wheelchair has the best stability.
If you are considering the installation of ramps to overcome obstacles, kindly note the
following:
Because of the large weight of the wheelchair we advise against using your own power for
driving on a ramp, since it might not be possible for you to prevent the wheelchair from
rolling backwards.
Never go up or down ramps without the aid of a helper.
2.16 Taking off the wheels (only for quick release 22", 24" rear
wheels)
To facilitate the transport off the wheelchair the rear wheels can be taken off:
1. Make sure the brakes standing in the off
position.
2. Take the wheelchair to the side frame where
you want to remove the wheel.
3. Press the button
c in the center of the wheel
hub.
4. Pull the wheel away from the frame.
2.17 Backrest adjusting / Seat inclination


 

 WARNING: Risk of tipping over – Be aware that the stability decrease when the
backrest is adjusted backwards.


 

 WARNING: Risk of injury – Apply the parking brakes before adjusting the
backrest and seat inclination.
The seat and the backrest can only be adjusted simultaneously or independently from one
another in their angle by an attendant. Be sure that the patient sits in the chair when the
attendant shall perform the back adjusting, seat inclination and that the wheelchair does not
tip over.

Inovys II
2011-11
ͳͶ
Seat inclination:
1. Pull lever con the left side (see label)
towards the grab handle dto adjust the seat
inclination.
Label
2. Pull/Push the seat in the desired position (0°t o
+ 21°), the gas pressure spring shall be pressed
in/out.
3. Loosen the lever c, to block the gas pressure
spring.
Backrest adjusting:
1. Pull lever con the right side (see label) towards the grab handle dto adjust the angle
of the backrest.
Label
2. Pull/Push the backrest in the desired position (0°to + 54°), the gas pressure spring shall
be pressed in/out.
3. Loosen the lever c, to block the gas pressure spring.
If your wheelchair features drum brakes, the levers c
cc
care used as brakes; additional
levers e
ee
ehave been mounted for adjusting angle of backrest and seat inclination.
These levers e
ee
ecan be triggered with the thumb.
2.18 Transport in the car


 

 WARNING: Risk of injury – See that the wheelchair is attached properly. So you
can avoid injury from the passengers during collision or sudden braking.


 

 WARNING: Risk of injury – Use for attaching the wheelchair and passenger
NEVER the same seatbelt.
To transport the wheelchair in the car use following steps:
1. Set the seat in a horizontal position and the backrest vertically.
2. Remove footrests, arm supports and accessories (ex. headrest, ...).
3. Store footrests, arm supports and accessories safely.
4. If possible, fold the wheelchair and remove the wheels.
5. Place the wheelchair in the luggage place with 2 persons.
6. If the wheelchair and the passenger compartment is NOT separated, attach the
frame of the wheelchair securely to the vehicle. You can use the available safety
belts in the vehicle.
7. Place the patient in the recommended existing seats with their seatbelt systems.
2.19 Use of the wheelchair as seat in a motor vehicle


 

 WARNING: The wheelchair has passed the crash of ISO 7176-19: 2008 and, as
such, has been designed and tested for use only as forward-facing seat in a
motor vehicle.


 

 WARNING: The wheelchair's pelvic belt alone is not suited as an occupant
restraint belt.

Inovys II
2011-11
ͳͷ
The wheelchair is tested using the four-point strap-tie system and a 3-point occupant-
restraint system.
Whenever feasable, use the seat of the vehicle and store the wheelchair in the cargo area.
Steps to secure the wheelchair in a motor vehicle:
1. Check that the vehicle is equipped with a suitable wheelchair tie down and occupant-
restraint system, conform ISO 10542.
2. Check that the components of the wheelchair tie down and occupant restraint system
are not frayed, contaminated, damaged or broken.
3. If equipped with an adjustable seat and/or back tilt, make sure that the wheelchair
user is sitting as upright as possible. If the user's condition prevents this, a risk
assessment should be done to evaluate the user's safety during transit.
4. Remove all mounted accessories such as trays and respiratory equipment, and
secure them in a safe place.
5. Position the wheelchair facing forward in the travelling direction, centrally between
the tie-down rails mounted in the floor of the vehicle.
6. Make sure that the indicated zones around the wheelchair user are clear from rigid
vehicle parts.
7. Mount the front securement straps according to the instructions of the strap-system
manufacturer at the indicated place. (figure 3)
This place is marked on the wheelchair with a symbol. (figure 4)
8. Roll back the wheelchair until the front straps are tight.
9. Apply the wheelchair brakes.
10. Mount the back securement straps according to the instructions of the strap-system
manufacturer at the indicated place. (figure 3)
11. This place is marked on the wheelchair with a symbol. (figure 4)
figure 3

Inovys II
2011-11
ͳ͸
Steps to secure the wheelchair user:
1. Remove both arm rests.
2. If present, attach the wheelchair's pelvic belt.
3. Attach the occupant restraint belts according to the instructions of the strap-system
manufacturer.
4. Wear the pelvic belt low across the front of the pelvis, so that the angle of the pelvic
belt is within the preferred zone of 30°to 75°to the horizontal, similar to that shown
below.
5. A steeper (greater) angle within the preferred zone is desirable.
6. Adjust the belt tightly according to the instructions of the strap-system manufacturer,
consistent with the user's comfort.
7. Ensure that the restraint belt connects in a straight line to the anchor point in the
vehicle and that no bends in the belt are visible, for instance at the axle of the rear
wheel.
8. Install the arm rests, if desired. Make sure that belts are not twisted or held away
from the body by wheelchair components such as arm rests or wheels.
3 Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren multi-functional wheelchairs Inovys II has been designed entirely for your
comfort. This wheelchair can be adjusted to individual requirements as explained below.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.


 

 WARNING: Risk of unsafe settings - Use only the settings described in this
manual.


 

 WARNING: Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).

Inovys II
2011-11
ͳ͹
3.1 Tools
To set up the wheelchair the following tools are needed.
•Wrench set n°10 to n°22
•Allen key set n°3 to n°8
•Screwdriver Phillips head
•Screwdriver
•Nipper
•Pliers
Assembly and settings may only be performed by a specialist dealer.
3.2 Manner of delivery
The Vermeiren Inovys II shall be delivered with:
•1 frame with arm supports, rear and front wheels
•1 pair footrests
•Seat and back cushions
•Tools
•Manual
•Accessories (optional)
When you receive the wheelchair, please check that the product supplied is complete and
fully functional. Warranty claims are only valid if the manufacturer (supplier) is notified in
writing within a period of two weeks. In the case of any defect that is not immediately
evident, warranty claims are only valid if the manufacturer (supplier) is notified in writing
within two weeks after it is detected. We shall remedy defects in the manner of our choosing
- either by carrying out a repair or by providing a replacement.
3.3 Mounting backrest


 

 WARNING: Risk of injury - Make sure that the ring of safety pin is firmly
secured.
After you have taken the wheelchair out of the
original packaging, push the backrest to the back
into the 90°position. Guide the safety pins !into
the appropriate socket to attach the spring ",
which is located at the back under the seat.
Check that no cables are squashed.
3.4 Adjusting the seat height and seat angle


 

 WARNING: Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.


 

 WARNING: Risk of injury - Self-locking nuts are only to be used once or are to be
secured with an additional screw locking device.


 

 WARNING: Risk of injury - Adjust the brakes if necessary after adjusting the seat
height and seat angle.

Inovys II
2011-11
ͳͺ


 

 WARNING: Risk of injury - Check that the seat heights are mounted in the same
position on both sides.


 

 WARNING: Risk of tipping over - When the driving wheels are adjusted, the
position of the wheels are altered.
The seat height of the Inovys II multiposition wheelchair is adjustable in 3 positions in steps
of 35 mm. The seat height can be adjusted by moving the front tube , attachment plate
gas pressure spring "and rear wheel plate $!in different positions. These components you
can find below the seat frame.
Seat height
Part %!
%!%!
%!"
""
"%!
%!%!
%!$
$$
$
460 mm Hole 1
495 mm Hole 2
530 mm Hole 3
Table 2: Seat heights
Front tube
The basic frame and the seat frame are screwed together with the front tube . In the basic
frame three different sockets are provided for these screws which determine the
wheelchair’s seat height.
"
""
"Attachment plate gas pressure spring
In addition to adjusting the frame, the gas pressure spring for the seat inclination can be
fixed at three different attaching heights ". So that the angle of inclination can be kept for
the seat inclination, the assembly height of the gas pressure spring "must correspond to
the assembly height of the front tube .
$
$$
$Rear wheel plate
The rear wheel plate $must correspond to the assembly height of the front tube .


 

 WARNING: Risk of tipping over – Be aware that you change the stability of the
wheelchair when changing the position of the driving wheels.


 

 WARNING: Risk of injury – Make sure that the rear wheels on both sides are
mounted in the same position.