VERSARE Operable Wall Sliding User manual

Versare Solutions, LLC
3236 California St. NE • Minneapolis, MN 55418
1-855-457-1473 • [e-mail]
Operable Wall Sliding
Assembly Instructions
Remove screws from
bottom panels.*
Connect top and bottom panels. Then
reinsert screws.
Tools and hardware included:
1.
2.
Wall Mount
Bracket
Top Panels Bottom Panels
End Panel
Bracket
Screws
Helpful Tip: *Keep shipping straps buckled for easier assembly.
Bolts

Versare Solutions, LLC
3236 California St. NE • Minneapolis, MN 55418
1-855-457-1473 • [e-mail]
Gently place end panel flat on the
ground and attach an end panel plate
loosely to the top and bottom using
two screws per plate.
4.
Attach end panel and plates to the
main panels using two more screws for
each plate.
5.
If not installing end panels on your Operable Wall skip to step 6.
Attach wall mount hinges using bolts
provided.
3.

Versare Solutions, LLC
3236 California St. NE • Minneapolis, MN 55418
1-855-457-1473 • [e-mail]
100044 REV A
Assembly complete!
We hope you enjoy your new Operable Wall Folding!
For questions regarding your Operable Wall Folding please contact us at
1-855-457-1473 or
[e-mail]
Unbuckle straps.
7.
Set any adjustable wheels into locked
position. Gently lift partition onto it’s
base and screw hinges into wall.
6.