VERSARE Quick-Wall User manual

Quick-Wall Sliding
Assembly Instructions
Hardware included:
Feet
Screw two wheels onto each foot with
one washer and one nut per wheel.
1.
+
+ +
+
++
2.
To attach wheel to panel, locate square nut in bottom track of outer panel and
slide to outer edge. Add three washers to wheel threading and screw into square
nut. Repeat for remaining wheels.
Screws
Bolts
Wheels
Washers Nuts
Button
Screws

Remove two bolts from outside, bottom edge of each outer panel and one
screw from the side of each outer panel. Then attach foot base with bolts first,
screws second. Repeat for other side.
1 st 2
nd
Important:
All bolts & screws
must be reinserted in
feet brackets for
proper use.
3.
+
+
Assembly complete!
We hope you enjoy your new Quick-Wall Sliding!
For questions regarding your Quick-Wall Sliding please contact us at
1-855-457-1473 or
[e-mail]
Versare Solutions, LLC
3236 California St. NE • Minneapolis, MN 55418
1-855-457-1473 • [e-mail]
100031 REV C