VERSARE Room Divider User manual

Versare Portable Products 3306 5th street NE Minneapolis, MN 55418
Phone: [phone] Fax: [phone] WWW.PortablePartitions.com
Room Divider Assembly Instructions
Recommended Tools 7/16”,
1/2”, and 9/16” wrench
Step #1 Place Partition Assembly on the floor as
shown.
Step #2: Locate the left top panel. Step #3: Place one of the end
panels on top of the assembly as
shown.
Step #4 Insert 9/16” bolt on top
hole on both ends, finger tight.
Step #5 Rotate the first panel 90
degrees as shown.
9/16”, 7/16”, 1/2 “

Versare Portable Products 3306 5th street NE Minneapolis, MN 55418
Phone: [phone] Fax: [phone] WWW.PortablePartitions.com
Room Divider Assembly Instructions
Step #6: Insert 7/16” bolt as shown, top
and bottom.
Step #8: Insert ½” bolt into rectangular
nut, top and bottom of partition.
Step #9: Tighten all bolts.
Step #10: Rotate partition assembly
so it rests on the back of the end
panel.
Step #7: Locate rectangular nut and
slide up channel and align with last
open hole.
Step #11: Place second end panel on
partition assembly as shown.

Versare Portable Products 3306 5th street NE Minneapolis, MN 55418
Phone: [phone] Fax: [phone] WWW.PortablePartitions.com
Room Divider Assembly Instructions
Step #12: Insert 9/16” bolt in top hole as
shown, top and bottom.
Step #14: Insert ½” bolt into rectangular
nut, top and bottom.
Step #15: Tighten all bolts.
Step #16: Clasp transport lock as
shown.
Step #13: Insert 7/16” bolt as shown,
top and bottom.
Step #17: Carefully lift partition in the
upright position.