intended for use or play by children.
19. This appliance is not to be used on,
by
or near children
or
invalids.
20. To prevent accidents and injury to you or damage to the
unit, when your callous remover is in use, keep it away
from the hair on your scalp, your eyebrows, eyelashes
as well as clothes, brushes wires, cords, shoelaces, etc.
21. Do not continually rub the unit on the same area
or
apply strong pressure.
22.
Do
not disassemble this device.
Before using your Callus Remover, please read this
instruction manual carefully and completely.
How to Charge
When the unit is out
of
power, for the first time to charge, it
should be charged for at least 10 hours, to extend the
battery life.
•
If
fully charged, you can use the appliance for 30
minutes.
• Charge the appliance regularly for 8 hours,
but
for
no
more than
16
hours.
1.
Switch
off
this device
by
push down the
on/off
switch
button.
2.
One hand hold the unit, another hand insert the
DC
plug
into the socket ofunit(fig.1).
3. Place the adaptor into the AC socket
on
the wall(fig.2).
4.
The charging indicator will light up to show it is on
charge.
'(tJ'
~~f~
't
How
to
Use
This Callus Remover is designed for smoothing coarse
skin on the feet and heels,
do
not use this device anywhere
else on the body.
l.
Wash and clean the skin and dry fully.
Note:
do not use on broken or bleeding skin.
2.
Make
sure the Rollers Grinding Head is placed into the
unit. See section
of
Changing the rollers grinding head
on
how
to remove
and
replace head.
3. Turn
on
the unit
by
pushing the switch up(fig.3) .
4. Gently rotate (back and
f01:th
or
side to side) (fig.4) the
callous I
com
I hard skin area for 2-3 seconds.
Dot
not
press hard, gently glide the unit over desire area. The
unit will stop
if
it is press too hard on the skin. Stop and
check
if
you have achieved the softness
you
desire.
If
not, go over the area for 2-3 more seconds and check
again. Continue to use this method until the level
of
smoothness is obtained.
5.
