Vertiv GEIST SA1-09001 User manual

GEIST™ SWITCHAIR
AIRFLOW MANAGEMENT DEVICE
Quick Installation Guide
VM1191/590-2233-501A 1
Models:
SA1-09001
Switch Type:
Side air intake-side air exhaust 9U
switch or two devices with an 18U
switch
CAUTION: Ensure the required
airflow for safe operation of
equipment is not compromised
when installing the Geist SwitchAir
device.
WARNING: Take precaution to
avoid interference with the switch’s
input power cords when installing
behind a live switch.
1. Installing the device into
the rack
Insert the SwitchAir 9U device
at the same U height as the
Cisco switch. Using customer
provided hardware, attach the
air deflector to the rack with
two cage nuts and screws.
Geist SwitchAir Airflow Management Device Installation
Rear rack
uprights Cisco switch
1
Front rack
uprights
SwitchAir device

To contact Vertiv Technical Support: visit www.VertivCo.com
© 2019 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names,
trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no
responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
2 VM1191/590-2233-501A