Vestamatic VHA-Smart Controller User manual

Subject to modifications.© Vestamatic GmbH 1/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
VHA-Smart Controller
Operating Instructions
VHA-Smart Controller Art.-no.: 01580162
Vestamatic Home Automation System.
G
1. Safety precautions
ATTENTION!
– Check the VHA-Smart Controller for signs of mechanical
damage after unpacking. If you notice any shipping damage,
do not start up the VHA-Smart Controller and notify your
supplier immediately.
– The VHA-Smart Controller should only be used for the pur-
pose specified by the manufacturer (refer to the operating
instructions). Any changes or modifications thereof are not
permissible and will result in loss of all warranty claims.
Ä
3055 001 GB 2619 A03
Contents
1. Safety precautions (safety measures)
2. Legend
3. General usage
4. Short description
5. Scope of delivery
6. Installation
7. Connect to the App
8. Save shortcut on the home screen
8.1 Steps for Google Chrome
8.2 Steps for Safari
9. Description of the App interface
9.1 General
9.2 Login Screen
9.3 Homescreen
9.4 Menu
9.5 Devices – List of devices
9.6 Devices – Add new devices (Automatic Scan)
9.7 Devices – Individual control
9.8 Devices – Individual control / Slat-angle control
9.9 Devices – List of registered devices
9.10 Devices – Motor settings
9.11 List of rooms and groups
9.12 List of registered rooms and groups
9.13 Scenes
9.14 Timer
9.15 Settings
9.16 Service
10. Troubleshooting
11. Contact
2. Legend
Menu Opens the menu.
Refresh
When activated, the motor data is newly requested and
updated.
Lasts longer, the more motors are paired.
Wizard
Clicking on this button activates the wizard. It explains
functions, buttons or processes that are displayed in
the app.
Add Click here to add new devices.
Settings Click here to open the appropriate settings.
Edit Clicking here opens editing options.
Motor settings A click here leads to the setting of motors.
Note, Info Indication that a motor is missing limit positions. A short
info text appears when icon is touched.
Intermediate
position
If an intermediate position is set, clicking this button will
cause the motor to move the set intermediate position.
Cancel Cancel terminates current settings and discards them.
3. General usage
Motors taught in the app should not be controlled simultaneously via radio
remote controls and the application.
4. Short description
Vestamatic Home Automation System for control of IO-AIR radio receivers.
Bidirectional protocol.
5. Scope of delivery
VHA-Smart Controller
Power supply
LAN cable
Micro SD-Card (not included in the scope of delivery)
IO-AIR Transceiver USB (not included in the scope of delivery)
Operating instructions
Article VHA-Smart Controller
Art.-no.: 01580162
Supply voltage: VDC 5 (via micro-USB connector)
Rated current: A 2.5
Interfaces: USB 4
LAN 1
microSD-Slot: 1
Operating temperature: °F 0°C (32°F) to +60 °C (140°F)
Protection degree: IP 20
Dimensions (L × W × H) mm 93 × 67 × 23 mm

Subject to modifications.© Vestamatic GmbH 2/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
6. Installation
– First insert the micro SD-Card in the slot of the controller.
– Plug the IO-AIR transceiver USB into a USB socket on the VHA-Smart
Controller.
– Connect the network cable to the VHA Smart Controller and plug the
other end into a free socket on your WiFi router.
– Then connect the VHA Smart Controller to the supplied power adapter
and plug it into the power outlet.
– The VHA Smart Controller starts up automatically and is ready for use
after approx. 2 minutes.
Step 1
Step 2
Step 3
NOTE:
We recommend an Ethernet connection, but if you want to con-
nect the controller wirelessly to your network, ignore “Step 2” and
follow the instructions in Section 7. “Connecting to the App”.
Furthermore, please use only the enclosed power supply to en-
sure the proper functioning of the controller.
i

Subject to modifications.© Vestamatic GmbH 3/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
9.1 General 9.2 Login Screen
9. Description of the App interface
The devices paired in the app communicate with a bidirectional protocol.
Thus, the app not only sends commands, but also receives information
from the devices.
This means that almost all actions performed by devices are also dis-
played in the interface. The app informs the user about these actions
through messages on the top right of the screen.
Will be shown when starting the app.
In the login screen the account and the system language can be selected.
a) Account Predefined user is called “admin”.
This account can create additional users.
The input field for users acts with an auto-
complete. This means that only the first letter
of your user(s) needs to be entered and they
are automatically proposed.
b) Password The password for the admin user is: admin1234.
The passwords of the self-created users are
freely definable.
c) Language
selection Selection between English and German.
d) Remember
me If this button is set, the user’s login data will be saved permanently so that this view will be
skipped in future logins.
e) Login button Logs in the selected user.
Figure 1
8. Save shortcut on the home screen
– Press the “Options” button (3-dots ) in the upper right corner of the
screen.
– Select “Add to Home Screen” and enter an individual name, if neces-
sary. The link will be created automatically.
– Press the “Send” button at the top right of the screen.
– Select the “To Homescreen” button and enter an individual name,
if necessary. The link will be created automatically.
To enable faster access in the future, you can save the application as a shortcut on
the start screen.
Below is a brief description for the “Google Chrome” and “Safari” browsers.
8.1 Steps for Google Chrome 8.2 Steps for Safari
7. Connect to the App
Connection via Ethernet cable
– After connecting the controller to your router with an Ethernet cable,
make sure your device is on the same network.
– Then open the Internet browser on your device.
– Enter the hostname in the address bar at the top. You will find the host-
name on the back of your controller or below:
VHA-Controller as a Raspberry Pi: controller/
VHA-Controller as a Windows PC: localhost/
– The device will now load the application and then display the app inter-
face.
NOTE:
The initial loading may take a longer time. It is recommended to switch off
the mobile data of the mobile phone that is used.
i
Wireless connection
– Connect to the network of the VHA-Smart Controller using a appropri-
ate device (e.g. mobile phone, laptop or tablet).
WiFi SSID: Vestamatic-AP
Password: vestamatic
– Then open the Internet browser on your device.
– Enter the hostname shown below in the address bar:
VHA-Controller as a Raspberry Pi: controller/
– The device will now load the application and then display the app inter-
face.
– Under Settings 9.16. you can then connect the controller to the desired
home network. You still open the application via controller/.
In the app, this wizard icon is placed on all views. By clicking on this button, you
activate the wizard that explains the functions, buttons or processes that are currently
shown. You can open this up again at any time.
When using the app for the first time, the wizard will be opened automatically.

Subject to modifications.© Vestamatic GmbH 4/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
9.3 Homescreen
The Homescreen first displays only predefined timers, scenes, and groups that can be
used immediately.
Paired motors as well as manually created rooms, groups, timers and scenes will be
added automatically.
a) Menu button Opens the menu. See contents in “9.4 Menu”.
b) Scenes & Timer Predefined scenes and timers that can directly control all
paired devices.
c) Groups &
rooms Room or group-wise control. Participants are displayed by clicking on the name.
The group “All devices” is predefined and controls
all paired motors.
d) Motors All paired motors are shown here.
Controllable via the slider.
If the motor has no limit positions, the slider is locked;
represented by a lock.
e) Wizard Opens the wizard to explain the app interface.
Can be opened again at any time.
f) Refresh Updates the motor information and thus updates the
position and data of the motors.
g) Homescreen
settings Opens the option to determine the display of the elements on the homescreen via drag & drop. Elements can be
moved or hidden. Define your favorites.
Figure 2

Subject to modifications.© Vestamatic GmbH 5/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
9.4 Menu
The menu is opened via the menu button .
Switch between the views using the tabs in the menu.
With this button, the menu can be fixed on larger
screens so that it is displayed permanently.
HOME Opens the Homescreen.
DEVICES Opens list of devices.
ROOMS Opens list of rooms.
GROUPS Opens list of groups.
SCENES Opens list of scenes.
TIMER Opens list of timers.
SETTINGS Leads to the system settings of the app.
SERVICE Shows an overview of the device information and
the Logbook.
LOGOUT Current user will be logged out.
Figure 3
9.5 Devices – List of devices
To get to this view, go to:
Menu Devices
All paired motors are shown here.
a) Listing of
devices Displays the number of paired devices.
b) Add Click on the symbol starts the “Automatic
Scan” for devices.
More detailed explanation in point 9.6 „Devices –
Add new devices“.
c) Refresh By clicking on symbol the device information
are requested and updated manually.
d) Device settings Click on symbol opens the list of registered
devices.
More detailed explanation in point 9.9 „Devices –
List of registered devices“.
e) Intermediate
position Click on symbol lets the motor drive to the set
intermediate position. If the button is grayed out,
no intermediate position is set.
f) Stop button Click on symbol stops motor in his movement.
Figure 4
NOTE:
If the slider is at the far left (0%), the motor is in its upper limit
position.
If the slider is on the far right (100%), the motor is in its lower limit
position.
i

Subject to modifications.© Vestamatic GmbH 6/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
9.6 Devices – Add new devices (Automatic Scan)
To get to this view, go to:
Menu Devices button (Automatic Scan)
When the automatic scan is opened, the search starts automatically.
The search can be stopped and restarted at any time.
Newly found devices are listed on the right, already paired devices are displayed
on the left.
Figure 5
In order for the motor to be found, the programming mode of the motor must be
activated.
– Briefly press the programming button on the motor head once. The green LED
flashes for 60 seconds.
– The motor will be listed as soon as it is found (Fig. 6).
Figure 6
– When all devices have been found, stop the scan to perform further actions.
Preferably, the programming mode of the motor should be stopped.
– Clicking on the name makes it possible to rename the motor (Fig. 7).
– By pressing the motor can be identified.
– By pressing on the “+”symbol the motor is added (not during test movement)!
– If a motor has been listed that is not to be paired, it can be removed by clicking
on the symbol.
Figure 7
– When pairing a motor, a spinner appears until the pairing process is completed.
The application acknowledges a successful pairing on the upper right edge of
the screen. The motor will then be displayed on the “already connected devices”
table (Fig. 8).
Figure 8

Subject to modifications.© Vestamatic GmbH 7/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
a) Refresh By clicking on the symbol the motor information
is requested and updated manually.
b) Settings Click on symbol to open a selection:
– open programming mode and
– open motor settings.
c) Motor speed Set speed is shown here. Depending on the mo-
tor, different speeds are possible, represented by
symbols.
d) Direct control The control of the motors is shown vertically here.
An animation represents the device accordingly.
e) Intermediate
position Click on symbol lets the motor drive to the set
intermediate position. If the button is grayed out,
no intermediate position is set.
f) Stop button Click on symbol stops motor in his movement.
9.7 Devices – Individual control
To get to this view, go to:
Menu Devices Click on motorname
or
Homescreen Click on motorname
This view is for the individual control of motors.
Figure 9
NOTE:
If the slider is at the top (0%), the motor is in its upper limit po-
sition.
If the slider is on the bottom (100%), the motor is in its lower limit
position.
i
a) Save slat-angle If the angular position is saved, the motor re-
sumes the set angle after each change of position
instead of keeping the slats in running direction.
b) Control of
motor position Shows the view to drive the motor.
c) Control of
slat angle Shows the view to change the angular position.
d) Setting of
slat angle The slider determines the angular position. A visualization is shown next to it.
e) Visualization
of angle Animation for determining the angle.
9.8 Devices – Individual control / Slat-angle control
To get to this view, go to:
Menu Devices Click on motorname
or
Homescreen Click on motorname
This view is for individual control. In the case of sunshading systems with slats
(for example a venetian blind), the angular position of the slats can also be adapted.
NOTE:
The mounting direction of the motor determines the orientation of
the slats. This is not reflected in the app.
i
Figure 10-2
Figure 10-1

Subject to modifications.© Vestamatic GmbH 8/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
9.9 Devices – List of registered devices
To get to this view, go to:
Menu Devices 
a) Add Click on the symbol to start Automatic Scan.
More detailed explanation in point “9.6 Devices –
Add New Devices“.
b) Expand Expands and closes other options for the devices.
c) Motor
settings Click on the symbol to get to the motor settings.
More detailed explanation in point “9.10. Devices
– Motor-Settings“.
d) Motorname
selection When assigning a name, the app features an au- tocomplete for predefined device names. A free
naming is still possible. When using Alexa, how-
ever, we recommend selecting one of the prede-
fined names.
e) Save By clicking on this icon
, changes, e.g. a new
name are saved.
f) Remove motor By clicking on the icon, the motor will be un-
paired and removed.
Figure 11
9.10 Devices – Motor settings
To get to this view, go to:
Menu Devices 

a) Motor speed Set the speed.
Switch between available speeds, e.g. lownoise,
standard and fast. Motor and App will confirm
change.
b) Motor-Reset Reset the motor. Two options:
“Limit positions only” or “Limit positions and
group / room assignments“.
c) Deadman “UP”
– fast By holding down the button the motor moves fast
endlessly up or down. Shortly after releasing the
button, the motor stops.
d) Deadman “UP”
– slow By holding down the button the motor moves slow
endlessly up or down. Shortly after releasing the
button, the motor stops.
e) Set ULP If no limit positions are set, the buttons are black.
After successfully set limit positions, the buttons
turn blue. After set limit positions, the same but-
tons can be used to overwrite them.
f) Set LLP
g) Changing
turning
direction
Changes the direction of rotation of the motor.
Only possible if no limit positions are set.
h) Intermediate
position Once limit positions have been set, the motor can be controlled. Move the motor to the desired
position and save it as an intermediate position
by clicking the button.
Figure 12

Subject to modifications.© Vestamatic GmbH 9/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
a) Add
Room/Group Click on the symbol to add a new room/group.
After the name selection you will be redirected to
the editing.
b) Edit
Room/Group Click on the symbol, you will be taken to the
“List of registered rooms/groups” view.
See also “9.12 “List of registered rooms / groups”.
c) Room/
Group name Display of the name. Clicking on the name opens the room/group and displays the individual par-
ticipants. A new click closes the expand.
d) Motor
informations For the participants various information can be displayed, for example: Missing limit positions,
position value and battery status.
9.11 List of rooms and groups
To get to this view, go to:
Menu Rooms or Groups
The following is an explanation of the room functionality, which applies equally to the
group functionality. They do not differ in terms of usage.
A group can also contain rooms, whereas rooms consist exclusively of individual
devices.
Figure 13
9.12 List of registered rooms and groups
To get to this view, go to:
Menu Rooms or Groups 
The following is an explanation of the extended room functionality, which applies
equally to the group functionality. They do not differ in terms of usage.
a) Add
Room/Group Adds a new room / group.
b) Room/
Group name Display of the name. By clicking on the name, the room / group can be renamed.
Open by the small arrow on the right edge.
c) Remove motor By clicking here you can remove individual
devices from the rooms / groups.
For groups, rooms can be removed accordingly.
d) Add motor Click here to add more motors to the room /
group. For groups, rooms are also available.
e) Set intermedi-
ate position for
room/group
By clicking on the symbol you can set an in-
termediate position for the room or group. This
intermediate position can then be used for other
commands. The position can be changed at any
time.
f) Delete
Room/Group Click here to delete the entire room / group.
Figure 14

Subject to modifications.© Vestamatic GmbH 10/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
a) Listing of Scenes All created scenes are listed here.
b) Add scene Adds a new scene.
c) Edit scene Opens options of the scene and reveals
selection for edit or delete.
9.13 Scenes
To get to this view, go to:
Menu Scenes
This view is used to overview, create and customize scenes
You can execute several commands with a single action.
Figure 15-1
The following is an explanation for creating a scene which is the same for editing
a scene.
Menü Scenes 
a) Scene title To title the scene.
b) Scene
Description Add an individual description for the scene.
c) Select object The selection determines which motors, rooms or
groups are controlled.
d) Choose action Individual commands can be selected for each motor,
room or group.
e) Save Saves the new scene or changes made.
f) Cancel Canceling the operation will discard all changes and
the editing mode is exited.
Figure 15-2

Subject to modifications.© Vestamatic GmbH 11/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
a) Listing of Timer All created timers are listed here.
b) Add timer Adds a new timer.
c) Edit timer Opens options of the timer and reveals
selection for edit or delete.
9.14 Timer
To get to this view, go to:
Menu Timer
This view is used to overview, create and customize timers.
They allow a time-dependent control of the connected devices.
Figure 16-1
The following is an explanation for creating a timer, which is the same for editing
a timer.
Menü Timer 
a) Timer title To title the timer.
b) Timer
description Add an individual description for the timer.
c) Time The selection determines at what time the timer is exe-
cuted.
d) Days of week Determines on which days of the week the timer is exe-
cuted.
e) Select com-
mand type Selection whether a single command or a scene is to be executed by this timer.
f) Select motors
& commands The selection options vary with the type of command. Either the motors, rooms and groups with the correspond-
ing action or a scene can be selected
g) Save Saves the new timer or changes made.
h) Cancel Canceling the operation will discard all changes and the
editing mode is exited.
Figure 16-2

Subject to modifications.© Vestamatic GmbH 12/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
9.15 Settings
To get to this view, go to:
Menu Settings
Here you can find the general settings of the application.
Figure 17
a) Language
selection Change the language of the application.
c) User Anlegung eines neuen Benutzerkontos.
New password Sets a new password for the selected user.
b) WiFi
Connect
to wireless
network
Selection of the WLAN network to connect to.
The list is updated via the refresh icon.
If a password is required, this is queried in a
dialog window. In case there is already a con-
nection via Ethernet cable, it will be prioritized.
Note: During the process of connecting to
a wireless network, the connection to the
Vestamatic-AP might fail briefly. Very long
loading screen is an indication for that.
We therefore suggest to completely close the
application and terminate the connection to the
access point via the settings of your device.
Then re-establish the connection again.

Subject to modifications.© Vestamatic GmbH 13/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
The use of Alexa an active internet connection is required.
To connect the VHA Smart Controller to a web-enabled network, either
connect an Ethernet cable or connect the controller wirelessly, as de-
scribed above.
NOTE:
The device (e.g., smartphone) connected to the „Vestamatic AP“
network of the VHA Smart Controller may still remain connected
and does not have to disconnect. If there is an internet connection,
it will be forwarded.
i
Configure connection to Alexa
– Log in to the Alexa app with your Amazon account and install the
Vestamatic VHA Smart Controller Skill.
To do this, simply follow the steps in the Amazon app.
– After successfully adding the skill, give Alexa the following command:
“Alexa ... tell controller to initialize!”
Alexa will give you a feedback whether the initialization was successful.
– You will then receive an e-mail with an 8-digit code. Enter this code in
the input field of the Vestamatic app.
– If the transmission was successful, you will receive a response in the app.
You can now control your devices with voice commands.
For an overview of possible voice commands, please refer to the skill
description in the Alexa app.
NOTE:
The verification code will be sent to the e-mail address that is also
used in the Amazon account.
If a wrong code is transmitted several times, the configuration will
be blocked temporarily.
i
d) Alexa Connecting to Alexa.
e) External Create new account (only as admin)
Creates a new external account. This selection
appears only for the admin use.
f) Design You can select between different color combina-
tions. The selection is updated immediately.
g) Date and Time This setting can be used to specify the date and
time. This is necessary for offline use. If the con-
troller is connected to the Internet, the time is
automatically synchronized.
h) System The system settings can be used to check for
updates, reset the system, or shut down the con-
troller.
NOTE:
After Alexa has been configured, badges are displayed below the
controllable elements (e.g. motors, groups, timers, etc.). These
contain a numeric naming according to their type. See fig. 2.
Therefore the elements can be controlled by name and/or number.
i

Subject to modifications.© Vestamatic GmbH 14/15
G
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
VHA-Smart Controller
9.16 Service
To get to this view, go to:
Menu Service
Here you will find the device information as well as the logbook entries for all actions.
Figure 18
a) Device
Informations The device information provide an overview of all paired devices. Among other things, the status of
the limit positions and the room or group alloca-
tion can be seen.
c) Legals View the privacy policy.
b) Logbook The logbook shows information about when which
commands were executed. The overview not only
covers individual users, but also whether the com-
mand was executed manually in the app or by a
remote control or Alexa.

Subject to modifications.© Vestamatic GmbH
Art.-Nr.: 3055 001 GB 2619 A03 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach • www.vestamatic.com
15/15
G
VHA-Smart Controller
11. Troubleshooting
Issue Possible causes Solution
App cannot be accessed via “Controller”. 1. Device is not in the same network.
2. Initial loading takes longer.
3. Mobile data of the device activated.
1. Check network connection.
2. Wait a bit, sometimes the initial loading takes
a little longer.
3. Disable mobile data.
Error sending Command. 1. Too many commands in a short time.
2. Command missed by the motor.
3. Frequency band blocked by other transmitter.
4. Connection with stick not established.
1. Short break, send command again.
2. Motor active? Try again.
3. Turn off other transmitters and try
transmitting again.
4. Restart the controller or pull out the stick and
plug it in again.
Motor does not respond to commands. 1. Motor in DeepSleep mode.
2. Frequency band blocked.
1. Connect the motor to the charger.
2. Try again.
Motor reacts to commands delayed. 1. Frequency band was blocked, and the motor
waited until safe transmission is possible.
2. Motor had to be woken up first.
1. Turn off other transmitters and try again.
2. Further commands are processed faster.
Green LED on the motor head does
not flash. 1. Motor empty.
2. Motor in DeepSleep mode.
1. Charge the motor.
2. Connect the motor to the charger.
Requesting motor info failed. 1. Missing or faulty feedback from the motor.
2. Delayed feedback from the motor.
1. Try again or reload page.
2. Try again.
Motor not found during automatic scan. 1. Search can take longer.
2. PROG button on the motor not pressed.
3. PROG mode of the motor not active.
4. Motor in DeepSleep mode.
5. Motor already paired to another app.
1. Wait a little longer.
2. Press the PROG button. Green LED flashes?
3. Press the PROG button. Green LED flashes?
4. Connect the motor to the charger.
5. Reset the motor.
Alexa does not answer, or
“Skill took too long to respond”. 1. Internet connection too slow.
2. Connection to Amazon canceled or not
established.
1. Check Internet connection or try others.
2. Restart the controller and try connecting
to Amazon again.
Control motor is immediately
acknowledged with error. Connection between stick and controller disturbed or not established.
Restart the controller and/or unplug Stick and
put it in again.
Application does not load though
connected to Vestamatic AP. Phone accesses mobile data and wants to open an actual website.
Switch off mobile data of the mobile phone.
In the app icons / symbols are greatly
enlarged. The browser has incorrectly loaded the image data.
Reload the page or (via the settings of the
respective browser) empty the cache.
Timers do not trigger at the set time. The internal time of the controller is not
synchronized.
Enter the correct time in the settings under
“Date and time”.
Contact
Vestamatic GmbH
Dohrweg 27
D-41066 Mönchengladbach / Germany
[email protected]
Tel.: [phone]