Aqara SSM-U02 User manual

Aqara Single Switch Module T1 (No Neutral) is based on the Zigbee 3.0 wireless
work with other Aqara smart devices to realize more smart scenes.
* This device requires a compatible Zigbee 3.0 hub.
Connect to Network
Indicator Light
Button
Antenna
01
All manuals and user guides at all-guides.com

1.
2.
3.
4.
6.
7.
9.
Do not cover when the plug is working.
Do not connect in series.
Do NOT use in humid environments or outdoors.
Do NOT place this product near a heat source. Do NOT place it in an enclosure
losses.
02
All manuals and user guides at all-guides.com

1.
installation!
Method 1: L1 is connected to the load wire. S0 and S1 are connected to the two
03
All manuals and user guides at all-guides.com

connected to S0, and the other end is connected to the live wire. L is connected to
the original switch, which is connected to the load wire, can be connected to S0 to
Diagram 1
04
All manuals and user guides at all-guides.com

Diagram 2 Diagram 3
All manuals and user guides at all-guides.com

2.
3.
touch it, and replace or repair it in time.
06
All manuals and user guides at all-guides.com

1.
app downloaded and the Aqara Hub installed.
4. Turn on the main power switch, and press the button on the module or on the
on the ceiling or inside the lights, the antenna should avoid too much shielding.
damaged.
07
All manuals and user guides at all-guides.com

2. Please open the app, tap “Home” and then tap “+” in the top right corner to
Neutral)”, and add it according to instructions.
Indicator Light Status Status Description
Device power on
Zigbee network is connecting
Blue light keeps on
All manuals and user guides at all-guides.com

Dimensions: 42.9 × 40 × 21.4 mm
Online Customer Service: www.aqara.com/support
Zigbee network is not connected
09
All manuals and user guides at all-guides.com

http://www.aqara.com/DoC/
10
All manuals and user guides at all-guides.com